Seongbo Shim

Publication Activity (10 Years)

Years Active: 2013-2024
Publications (10 Years): 19

Top Topics

Eliminating Redundant

Simultaneous Optimization

Physical Design

Top Venues

Int. J. Comput. Assist. Radiol. Surg.

IEEE Trans. Biomed. Eng.

Publications

Seongbo Shim, Joonho Seo
Robotic system for nasopharyngeal swab sampling based on remote center of motion mechanism. Int. J. Comput. Assist. Radiol. Surg. 19 (3) (2024)
Seunguk Kim, Seongbo Shim, Daekeun Ji, Jaesung Hong
Wave-Shaped Notched Compliant Joint With High Rigidity. IEEE Robotics Autom. Lett. 7 (4) (2022)
Seongbo Shim, Hyo-Jeong Cha, Joonho Seo
Lead-Screw-Driven Revolute Joint for Use in the Remote Center of Motion Mechanism. IEEE Access 10 (2022)
Seongpung Lee, Seongbo Shim, Hogun Ha, Hyunki Lee, Jaesung Hong
Simultaneous Optimization of Patient-Image Registration and Hand-Eye Calibration for Accurate Augmented Reality in Surgery. IEEE Trans. Biomed. Eng. 67 (9) (2020)
Seongbo Shim, Daekeun Ji, Seongpung Lee, Hyunseok Choi, Jaesung Hong
Compact Bone Surgery Robot With a High-Resolution and High-Rigidity Remote Center of Motion Mechanism. IEEE Trans. Biomed. Eng. 67 (9) (2020)
Suhyeong Choi, Seongbo Shim, Youngsoo Shin
Neural Network Classifier-Based OPC With Imbalanced Training Data. IEEE Trans. Comput. Aided Des. Integr. Circuits Syst. 38 (5) (2019)
Daekeun Ji, Taehun Kang, Seongbo Shim, Seongpung Lee, Jaesung Hong
Wire-driven flexible manipulator with constrained spherical joints for minimally invasive surgery. Int. J. Comput. Assist. Radiol. Surg. 14 (8) (2019)
Suhyeong Choi, Seongbo Shim, Youngsoo Shin
Electrothermal Analysis With Nonconvective Boundary Conditions. IEEE Trans. Circuits Syst. II Express Briefs (8) (2018)
Seongbo Shim, Seongpung Lee, Daekeun Ji, Hyunseok Choi, Jaesung Hong
Trigonometric Ratio-Based Remote Center of Motion Mechanism for Bone Drilling. IROS (2018)
Wachirawit Ponghiran, Seongbo Shim, Youngsoo Shin
Cut mask optimization for multi-patterning directed self-assembly lithography. DATE (2017)
Seongbo Shim, Woohyun Chung, Youngsoo Shin
Lithography Defect Probability and Its Application to Physical Design Optimization. IEEE Trans. Very Large Scale Integr. Syst. 25 (1) (2017)
Seongbo Shim, Youngsoo Shin
Fast Verification of Guide-Patterns for Directed Self-Assembly Lithography. IEEE Trans. Comput. Aided Des. Integr. Circuits Syst. 36 (9) (2017)
Seongbo Shim, Taehun Kang, Daekeun Ji, Hyunseok Choi, Sanghyun Joung, Jaesung Hong
An all-joint-control master device for single-port laparoscopic surgery robots. Int. J. Comput. Assist. Radiol. Surg. 11 (8) (2016)
Seongbo Shim, Youngsoo Shin
Mask optimization for directed self-assembly lithography: Inverse DSA and inverse lithography. ASP-DAC (2016)
Kiwon Yoon, Seongbo Shim, Youngsoo Shin
Crosslink insertion for minimizing OCV clock skew. ISCAS (2016)
Seongbo Shim, Suhyeong Choi, Youngsoo Shin
Machine learning (ML)-based lithography optimizations. APCCAS (2016)
Seongbo Shim, Woohyun Chung, Youngsoo Shin
Redundant via insertion for multiple-patterning directed-self-assembly lithography. DAC (2016)
Seongbo Shim, Woohyun Chung, Youngsoo Shin
Placement optimization for MP-DSAL compliant layout. ICICDT (2016)
Woohyun Chung, Seongbo Shim, Youngsoo Shin
Redundant via insertion in directed self-assembly lithography. DATE (2016)
Seongbo Shim, Jae Wook Lee, Youngsoo Shin
An Analytical Approach to Thermal Design and Optimization With a Temperature-Dependent Power Model. IEEE Trans. Circuits Syst. I Regul. Pap. (3) (2015)
Woohyun Chung, Seongbo Shim, Youngsoo Shin
Identifying redundant inter-cell margins and its application to reducing routing congestion. DATE (2015)
Seongbo Shim, Youngsoo Shin
Physical design and mask optimization for directed self-assembly lithography (DSAL). VLSI-SoC (2015)
Seongbo Shim, Woohyun Chung, Youngsoo Shin
Defect Probability of Directed Self-Assembly Lithography: Fast Identification and Post-Placement Optimization. ICCAD (2015)
Seongbo Shim, Taehun Kang, Daekeun Ji, Jaesung Hong
A preliminary study on joint to joint control master device for single port laparoscopic surgery robot. URAI (2015)
Seongbo Shim, Yoojong Lee, Youngsoo Shin
Lithographic defect aware placement using compact standard Cells without inter-cell margin. ASP-DAC (2014)
Seongbo Shim, Minyoung Mo, Sangmin Kim, Youngsoo Shin
Analysis and minimization of short-circuit current in mesh clock network. ICCD (2013)