Kai Tang

ORCID

Publication Activity (10 Years)

Years Active: 1994-2024
Publications (10 Years): 39

Top Venues

Comput. Aided Des.

Robotics Comput. Integr. Manuf.

IEEE Trans Autom. Sci. Eng.

J. Comput. Des. Eng.

Publications

Zhaoyu Li, Dong He, Xiangyu Li, Xiaoke Deng, Pengcheng Hu, Jiancheng Hao, Yue Hou, Hongyu Yu, Kai Tang
Efficient five-axis scanning-inspection path planning for complex freeform surfaces. Robotics Comput. Integr. Manuf. 86 (2024)
Kangcheng Liu, Yong-Jin Liu, Kai Tang, Ming Liu, Baoquan Chen
Generalized Label-Efficient 3D Scene Parsing via Hierarchical Feature Aligned Pre-Training and Region-Aware Fine-tuning. CoRR (2023)
Dong He, Zhaoyu Li, Xiangyu Li, Yamin Li, Kai Tang
Collision-Conscious Multi-Pass Flank Milling of Complicated Parts Based on Stripification. Comput. Aided Des. 157 (2023)
Tak Yu Lau, Li Chen, Dong He, Zhaoyu Li, Kai Tang
Partition-based Print Sequence Planning and Adaptive Slicing for Scalar Field-based Multi-axis Additive Manufacturing. Comput. Aided Des. 163 (2023)
Zhaoyu Li, Kai Tang, Pengcheng Hu, Lihua Huang
Five-Axis Trochoidal Sweep Scanning Path Planning for Free-Form Surface Inspection. IEEE Trans Autom. Sci. Eng. 20 (2) (2023)
Jiancheng Hao, Zhaoyu Li, Xiangyu Li, Fubao Xie, Dong He, Kai Tang
Partition-based 3 + 2-axis tool path generation for freeform surface machining using a non-spherical tool. J. Comput. Des. Eng. 9 (5) (2022)
Yamin Li, Dong He, Shangqin Yuan, Kai Tang, Jihong Zhu
Vector field-based curved layer slicing and path planning for multi-axis printing. Robotics Comput. Integr. Manuf. 77 (2022)
Fubao Xie, Xishuang Jing, Chengyang Zhang, Siyu Chen, Danjie Bi, Zhaoyu Li, Dong He, Kai Tang
Volume decomposition for multi-axis support-free and gouging-free printing based on ellipsoidal slicing. Comput. Aided Des. 143 (2022)
Yujie Zhao, Changqing Liu, Zhiwei Zhao, Kai Tang, Dong He
Reinforcement learning method for machining deformation control based on meta-invariant feature space. Vis. Comput. Ind. Biomed. Art 5 (1) (2022)
Yamin Li, Kai Tang, Dong He, Xiangyu Wang
Multi-Axis Support-Free Printing of Freeform Parts with Lattice Infill Structures. Comput. Aided Des. 133 (2021)
Zhaoyu Li, Pengcheng Hu, Fubao Xie, Kai Tang
A variable-depth multi-layer five-axis trochoidal milling method for machining deep freeform 3D slots. Robotics Comput. Integr. Manuf. 68 (2021)
Yaoan Lu, Kai Tang, Chengyong Wang
Collision-free and smooth joint motion planning for six-axis industrial robots by redundancy optimization. Robotics Comput. Integr. Manuf. 68 (2021)
Dong He, Zhaoyu Li, Yamin Li, Kai Tang
Quasi-Developable and Signed Multi-Strip Approximation of a Freeform Surface Mesh for Efficient Flank Milling. Comput. Aided Des. 140 (2021)
Li Chen, Tak Yu Lau, Kai Tang
Manufacturability analysis and process planning for additive and subtractive hybrid manufacturing of Quasi-rotational parts with columnar features. Comput. Aided Des. 118 (2020)
Lufeng Chen, Rong Zhang, Kai Tang, Pengcheng Hu, Pengyu Zhao, Zhaoyu Li, Zhenwei Han
A spiral-based inspection path generation algorithm for efficient five-axis sweep scanning of freeform surfaces. Comput. Aided Des. 124 (2020)
Fubao Xie, Lufeng Chen, Zhaoyu Li, Kai Tang
Path smoothing and feed rate planning for robotic curved layer additive manufacturing. Robotics Comput. Integr. Manuf. 65 (2020)
Yamin Li, Kai Tang, Long Zeng
A Voxel Model-Based Process-Planning Method for Five-Axis Machining of Complicated Parts. J. Comput. Inf. Sci. Eng. 20 (4) (2020)
Zhaoyu Li, Lufeng Chen, Ke Xu, Yongsheng Gao, Kai Tang
Five-axis Trochoidal Flank Milling of Deep 3D Cavities. Comput. Aided Des. 119 (2020)
Fubao Xie, Danjie Bi, Kai Tang
A potential field based multi-axis printing path generation algorithm. Int. J. Comput. Integr. Manuf. 33 (12) (2020)
Fengting Yan, Yonghao Hu, Jinyuan Jia, Zihao Ai, Kai Tang, Zhicai Shi, Xiang Liu
Interactive WebVR visualization for online fire evacuation training. Multim. Tools Appl. 79 (41-42) (2020)
Yamin Li, Long Zeng, Kai Tang, Chun Xie
Orientation-point relation based inspection path planning method for 5-axis OMI system. Robotics Comput. Integr. Manuf. 61 (2020)
Yang Zhang, Kai Tang
Automatic Sweep Scan Path Planning for Five-Axis Free-Form Surface Inspection Based on Hybrid Swept Area Potential Field. IEEE Trans Autom. Sci. Eng. 16 (1) (2019)
Xiangyu Li, Junxue Ren, Kai Tang, Yuke Zhou
A Tracking-Based Numerical Algorithm for Efficiently Constructing the Feasible Space of Tool Axis of a Conical Ball-End Cutter in Five-Axis Machining. Comput. Aided Des. 117 (2019)
Ke Xu, Lufeng Chen, Kai Tang
Support-Free Layered Process Planning Toward 3 + 2-Axis Additive Manufacturing. IEEE Trans Autom. Sci. Eng. 16 (2) (2019)
Ke Xu, Yingguang Li, Lufeng Chen, Kai Tang
Curved layer based process planning for multi-axis volume printing of freeform parts. Comput. Aided Des. 114 (2019)
Li Chen, Ke Xu, Kai Tang
Optimized sequence planning for multi-axis hybrid machining of complex geometries. Comput. Graph. 70 (2018)
Qianhang Yan, Ming Luo, Kai Tang
Multi-axis variable depth-of-cut machining of thin-walled workpieces based on the workpiece deflection constraint. Comput. Aided Des. 100 (2018)
Wen Zhou, Kai Tang, Jinyuan Jia
S-LPM: segmentation augmented light-weighting and progressive meshing for the interactive visualization of large man-made Web3D models. World Wide Web 21 (5) (2018)
Lulin Quan, Yang Zhang, Kai Tang
Curved Reflection Symmetric Axes on Free-Form Surfaces and Their Extraction. IEEE Trans Autom. Sci. Eng. 15 (1) (2018)
Pengcheng Hu, Huicheng Zhou, Jihong Chen, Chen-Han Lee, Kai Tang, Jianzhong Yang, Shuyu Shen
Automatic generation of efficient and interference-free five-axis scanning path for free-form surface inspection. Comput. Aided Des. 98 (2018)
Pengcheng Hu, Rong Zhang, Kai Tang
Automatic Generation of Five-Axis Continuous Inspection Paths for Free-Form Surfaces. IEEE Trans Autom. Sci. Eng. 14 (1) (2017)
Fengting Yan, Yonghao Hu, Qinghua Guo, Kai Tang, Jinyuan Jia, Hehua Zhu
Key Lightweighting Technologies of Web3D for Virtual Training of Metro Station Fire Evacuation. Edutainment (2017)
Pengcheng Hu, Lufeng Chen, Kai Tang
Efficiency-optimal iso-planar tool path generation for five-axis finishing machining of freeform surfaces. Comput. Aided Des. 83 (2017)
Ke Xu, Jiarui Wang, Chih-Hsing Chu, Kai Tang
Cutting force and machine kinematics constrained cutter location planning for five-axis flank milling of ruled surfaces. J. Comput. Des. Eng. 4 (3) (2017)
Zi Zhou, Yang Zhang, Kai Tang
Sweep scan path planning for efficient freeform surface inspection on five-axis CMM. Comput. Aided Des. 77 (2016)
Yong-Jin Liu, Cheng-Chi Yu, Minjing Yu, Kai Tang, Deok-Soo Kim
A Robust Divide and Conquer Algorithm for Progressive Medial Axes of Planar Shapes. IEEE Trans. Vis. Comput. Graph. 22 (12) (2016)
Xiaojun Liu, Ning Xie, Kai Tang, Jinyuan Jia
Lightweighting for Web3D visualization of large-scale BIM scenes in real-time. Graph. Model. 88 (2016)
Pengcheng Hu, Kai Tang
Five-axis tool path generation based on machine-dependent potential field. Int. J. Comput. Integr. Manuf. 29 (6) (2016)
Tsz-Ho Kwok, Yanqiu Zhang, Charlie C. L. Wang, Yong-Jin Liu, Kai Tang
Styling Evolution for Tight-Fitting Garments. IEEE Trans. Vis. Comput. Graph. 22 (5) (2016)
Wen-Yong Gong, Yong-Jin Liu, Kai Tang, Tie-Ru Wu
Approximate Delaunay mesh reconstruction and quality estimation from point samples. J. Comput. Appl. Math. 274 (2015)
Feng Ni, Daniel Rojas, Kai Tang, Lilong Cai, Tamim Asfour
A jumping robot using soft pneumatic actuator. ICRA (2015)
Li Chen, Ke Xu, Kai Tang
Collision-free tool orientation optimization in five-axis machining of bladed disk. J. Comput. Des. Eng. 2 (4) (2015)
Lulin Quan, Kai Tang
Polynomial local shape descriptor on interest points for 3D part-in-whole matching. Comput. Aided Des. 59 (2015)
Rong Zhang, Pengcheng Hu, Kai Tang
Five-axis finishing tool path generation for a mesh blade based on linear morphing cone. J. Comput. Des. Eng. 2 (4) (2015)
Xiangzhi Wei, Ajay Joneja, Kai Tang
An Improved Algorithm for the Automated Design of Large-Scaled Robot Skin. IEEE Trans Autom. Sci. Eng. 12 (1) (2015)
Pengcheng Hu, Lufeng Chen, Jiarui Wang, Kai Tang
Boundary-Conformed Tool Path Generation Based on Global Reparametrization. CAD/Graphics (2015)
Wen-Yong Gong, Yong-Jin Liu, Kai Tang, Tie-Ru Wu
Variational Discrete Developable Surface Interpolation. J. Comput. Inf. Sci. Eng. 14 (2) (2014)
Ming Chen, Kai Tang
quasi-developable Bezier surface interpolation of two space curves. Comput. Aided Des. 45 (11) (2013)
Ming Chen, Kai Tang
Quasi-developable surface modeling of contours with curved triangular patches. Comput. Graph. 37 (7) (2013)
Pengcheng Hu, Kai Tang, Chen-Han Lee
Global obstacle avoidance and minimum workpiece setups in five-axis machining. Comput. Aided Des. 45 (10) (2013)
Yong-Jin Liu, Kai Tang
The complexity of geodesic Voronoi diagrams on triangulated 2-manifold surfaces. Inf. Process. Lett. 113 (4) (2013)
Yong-Jin Liu, Kai Tang, Wen-Yong Gong, Tie-Ru Wu
Industrial design using interpolatory discrete developable surfaces. Comput. Aided Des. 43 (9) (2011)
Wen-Yong Gong, Yong-Jin Liu, Kai Tang, Tie-Ru Wu
2-Manifold Surface Sampling and Quality Estimation of Reconstructed Meshes. ISVD (2011)
Yong-Jin Liu, Zhanqing Chen, Kai Tang
Construction of Iso-Contours, Bisectors, and Voronoi Diagrams on Triangulated Surfaces. IEEE Trans. Pattern Anal. Mach. Intell. 33 (8) (2011)
Pengcheng Hu, Kai Tang
Improving the dynamics of five-axis machining through optimization of workpiece setup and tool orientations. Comput. Aided Des. 43 (12) (2011)
Yong-Jin Liu, Wen-Qi Zhang, Kai Tang
\mathcal{NP} -hardness and approximation algorithms. Vis. Comput. 26 (4) (2010)
Charlie C. L. Wang, Kai Tang
Pattern computation for compression garment by a physical/geometric approach. Comput. Aided Des. 42 (2) (2010)
Ming Chen, Kai Tang
A fully geometric approach for developable cloth deformation simulation. Vis. Comput. 26 (6-8) (2010)
Zhanqing Chen, Kai Tang
3D Shape Classification Based on Spectral Function and MDS Mapping. J. Comput. Inf. Sci. Eng. 10 (1) (2010)
Kai Tang, Ming Chen
Quasi-Developable Mesh Surface Interpolation via Mesh Deformation. IEEE Trans. Vis. Comput. Graph. 15 (3) (2009)
Yong-Jin Liu, Wen-Qi Zhang, Kai Tang
On the performance of maximal intersection of spherical polygons by arcs. CAD/Graphics (2009)
Huawei Wang, Kai Tang
Biorthogonal wavelet construction for hybrid quad/triangle meshes. Vis. Comput. 25 (4) (2009)
Huawei Wang, Kai Tang, Kaihuai Qin
Biorthogonal wavelets based on gradual subdivision of quadrilateral meshes. Comput. Aided Geom. Des. 25 (9) (2008)
Charlie C. L. Wang, Kai Tang
Pattern computation for compression garment. Symposium on Solid and Physical Modeling (2008)
Pankaj K. Agarwal, Danny Z. Chen, Shashidhara K. Ganjugunte, Ewa Misiolek, Micha Sharir, Kai Tang
Stabbing Convex Polygons with a Segment or a Polygon. ESA (2008)
Kun Chen, Kai Tang
Interactive Haptic Refinement of a Five-Axis Finishing Cut. J. Comput. Inf. Sci. Eng. 8 (4) (2008)
Nan Wang, Kai Tang
Five-axis tool path generation for a flat-end tool based on iso-conic partitioning. Comput. Aided Des. 40 (12) (2008)
Yong-Jin Liu, Kai Tang, Ajay Joneja
Modeling dynamic developable meshes by the Hamilton principle. Comput. Aided Des. 39 (9) (2007)
Hongwei Lin, Kai Tang, Ajay Joneja, Hujun Bao
Generating strictly non-self-overlapping structured quadrilateral grids. Comput. Aided Des. 39 (9) (2007)
Jinyuan Jia, Sijia Song, Ajay Joneja, Kai Tang
Solving Intersection Problem of a Canal Surface and a Sphere Analytically. CGVR (2007)
Nan Wang, Kai Tang
Automatic generation of gouge-free and angular-velocity-compliant five-axis toolpath. Comput. Aided Des. 39 (10) (2007)
Jinyuan Jia, Jiasi Song, Ajay Joneja, Kai Tang
Solving Intersection Problem of A Canal Surface and A Sphere Analytically. CGVR (2007)
Charlie C. L. Wang, Kai Tang
Woven model based geometric design of elastic medical braces. Comput. Aided Des. 39 (1) (2007)
Yong-Jin Liu, Kai Tang, Ajay Joneja
An Efficient Implementation of RBF-Based Progressive Point-Sampled Geometry. GMP (2006)
Huawei Wang, Kaihuai Qin, Kai Tang
Efficient wavelet construction with Catmull-Clark subdivision. Vis. Comput. 22 (9-11) (2006)
Kai Tang, Charlie C. L. Wang, Danny Z. Chen
Minimum Area Convex Packing of Two Convex Polygons. Int. J. Comput. Geom. Appl. 16 (1) (2006)
Jinyuan Jia, Ajay Joneja, Kai Tang
Robustly Computing Intersection Curves of Two Canal Surfaces with Quadric Decomposition. International Conference on Computational Science (2) (2006)
Kai Tang, Yong-Jin Liu
Dynamic Medial Axes of Planar Shapes. Computer Graphics International (2006)
Fu Jing, Ajay Joneja, Kai Tang
Modeling wrinkles on smooth surfaces for footwear design. Comput. Aided Des. 37 (8) (2005)
Charlie C. L. Wang, Kai Tang, Benjamin M. L. Yeung
Freeform surface flattening based on fitting a woven mesh model. Comput. Aided Des. 37 (8) (2005)
Yong-Jin Liu, Kai Tang, Ajay Joneja, Matthew Ming-Fai Yuen
Multiresolution Shape Modeling and Editing in Reverse Engineering. Int. J. Image Graph. 5 (4) (2005)
Charlie C. L. Wang, Kai Tang
Non-self-overlapping Hermite interpolation mapping: a practical solution for structured quadrilateral meshing. Comput. Aided Des. 37 (2) (2005)
Jinyuan Jia, Ajay Joneja, Kai Tang
Revolute Quadric Decomposition of Canal Surfaces and Its Applications. International Conference on Computational Science (2) (2005)
Yong-Jin Liu, Kai Tang, Ajay Joneja
Sketch-based free-form shape modelling with a fast and stable numerical engine. Comput. Graph. 29 (5) (2005)
Kai Tang, Charlie C. L. Wang
Modeling Developable Folds on a Strip. J. Comput. Inf. Sci. Eng. 5 (1) (2005)
Kai Tang, Yong-Jin Liu
An optimization algorithm for free-form surface partitioning based on weighted gaussian image. Graph. Model. 67 (1) (2005)
Charlie C. L. Wang, Kai Tang
Optimal Boundary Triangulations of an Interpolating Ruled Surface. J. Comput. Inf. Sci. Eng. 5 (4) (2005)
Charlie C. L. Wang, Kai Tang
Achieving developability of a polygonal surface by minimum deformation: a study of global and local optimization approaches. Vis. Comput. 20 (8-9) (2004)
Yong-Jin Liu, Kai Tang, Matthew Ming-Fai Yuen
Efficient and Stable Numerical Algorithms on Equilibrium Equations for Geometric Modeling. GMP (2004)
Kai Tang, Yong-Jin Liu
A geometric method for determining intersection relations between a movable convex object and a set of planar polygons. IEEE Trans. Robotics 20 (4) (2004)
Jinyuan Jia, Kai Tang, Ajay Joneja, Ki-Wan Kwok
Computing Planar Sections of Surfaces of Revolution with Revolute Quadric Decomposition. SMI (2004)
Yong-Jin Liu, Kai Tang, Matthew Ming-Fai Yuen
Multiresolution Free Form Object Modeling with Point Sampled Geometry. J. Comput. Sci. Technol. 19 (5) (2004)
Jinyuan Jia, Kai Tang, Ajay Joneja
Biconic subdivision of surfaces of revolution and its applications in intersection problems. Vis. Comput. 20 (7) (2004)
Charlie C. L. Wang, Kai Tang
Developability-preserved free-form deformation of assembled patches. Symposium on Solid Modeling and Applications (2004)
Guo-Jin Wang, Kai Tang, Chiew-Lan Tai
Parametric representation of a surface pencil with a common spatial geodesic. Comput. Aided Des. 36 (5) (2004)
Charlie C. L. Wang, Yu Wang, Kai Tang, Matthew M. F. Yuen
Reduce the stretch in surface flattening by finding cutting paths to the surface boundary. Comput. Aided Des. 36 (8) (2004)
Yong-Jin Liu, Matthew Ming-Fai Yuen, Kai Tang
Manifold-guaranteed out-of-core simplification of large meshes with controlled topological type. Vis. Comput. 19 (7-8) (2003)
Kai Tang, Anthony Pang
Optimal connection of loops in laminated object manufacturing. Comput. Aided Des. 35 (11) (2003)
Kai Tang, Ajay Joneja
Traversing the machining graph of a pocket. Comput. Aided Des. 35 (11) (2003)
Kai Tang, Yong-Jin Liu
Maximal intersection of spherical polygons by an arc with applications to 4-axis machining. Comput. Aided Des. 35 (14) (2003)

Kai Tang.css-eqlu8i{font-size:small;padding-left:4px;}

Publication Activity (10 Years)

Top Topics

Top Venues

Kai Tang