Xiaoqiang Tang

Publication Activity (10 Years)

Years Active: 2001-2024
Publications (10 Years): 14

Top Topics

Tumor Segmentation

Behavioral Model

Top Venues

Int. J. Autom. Comput.

Briefings Bioinform.

Publications

Haining Sun, Xiaoqiang Tang, Shuzhi Sam Ge
Controllable Trade-Off Between Performance and Constrained Input for Vibration Suppression in Flexible Space Structures. IEEE Trans. Aerosp. Electron. Syst. 60 (3) (2024)
Xiaoqiang Tang, Antonio Raffo, Nicola Donato, Giovanni Crupi, Jialin Cai
Theoretical and Experimental Analysis of a CSWPL Behavioral Model for Microwave GaN Transistors Including DC Bias Voltages. IEEE Trans. Comput. Aided Des. Integr. Circuits Syst. 43 (3) (2024)
Guotong Li, Xiaoqiang Tang, Jianfeng Li, Mingjie Dong
Error identification and compensation regarding the kinematic parameter of the MD-PEF for tibial deformity correction. Comput. Biol. Medicine 158 (2023)
Dongxing Li, Senhao Hou, Yuheng Wang, Xiaoqiang Tang
Dynamic Modeling and Control of Winch-Integrated Cable-Driven Parallel Robots Using Singular Perturbation Method. ICIRA (7) (2023)
Xiaoman Wang, Lifei Ma, Xiaoya Pei, Heping Wang, Xiaoqiang Tang, Jian-Fei Pei, Yang-Nan Ding, Siyao Qu, Zi-Yu Wei, Hui-Yu Wang, Xiaoyue Wang, Gong-Hong Wei, De-Pei Liu, Houzao Chen
Comprehensive assessment of cellular senescence in the tumor microenvironment. Briefings Bioinform. 23 (3) (2022)
Xiaoqiang Tang, Jialin Cai
Implementation of Polynomial Fitted Poly-Harmonic Distortion Model with Frequency Defined Device. ICTA (2022)
Xiaoqiang Tang, Ming Zhang, Haifeng Shi, Changjie Pan
Image Pattern Recognition Combined With Data Mining for Diagnosis and Detection of Myocardial Infarction. IEEE Access 8 (2020)
Senhao Hou, Xiaoqiang Tang, Ling Cao, Zhiwei Cui, Haining Sun, Yingwei Yan
Research on End-force Output of 8-cable Driven Parallel Manipulator. Int. J. Autom. Comput. 17 (3) (2020)
Sihui Tian, Xiaoqiang Tang, Yuqi Li
Analysis and Evaluation on Unloading Ratio of Zero-g Simulation System Based on Torques of Space Manipulator. Robotica 37 (8) (2019)
Zhiwei Cui, Xiaoqiang Tang, Senhao Hou, Haining Sun, Dianjun Wang
Optimization Design of Redundant Cable Driven Parallel Robots Based on Constant Stiffness Space. ROBIO (2019)
Zhiwei Cui, Xiaoqiang Tang, Senhao Hou, Haining Sun, Dianjun Wang
Calculation and Analysis of Constant Stiffness Space for Redundant Cable-Driven Parallel Robots. IEEE Access 7 (2019)
Fei Gao, Xiaoqiang Tang
Research on Computer Aided Design and GIS Conversion Method. J. Multim. Process. Technol. 8 (2) (2017)
Xiaoqiang Tang, Weifang Wang, Lewei Tang
A geometrical workspace calculation method for cable-driven parallel manipulators on minimum tension condition. Adv. Robotics 30 (16) (2016)
Zhihua Liu, Xiaoqiang Tang, Zhufeng Shao, Liping Wang
Dimensional optimization of the Stewart platform based on inertia decoupling characteristic. Robotica 34 (5) (2016)
Lewei Tang, Clément Gosselin, Xiaoqiang Tang, Xiaoling Jiang
Dynamic trajectory planning of planar two-dof redundantly actuated cable-suspended parallel robots. IROS (2014)
Yu Zhao, Tiemin Li, Xiaowen Yu, Xiaoqiang Tang, Liping Wang
Mobility analysis of a Sarrus Linkage-like 7-R single closed loop mechanism. ICRA (2013)
Peng Wei, Amine Meksoub, Dengfeng Sun, Xiaoqiang Tang
Optimal Sequential Backward Flow Saturation for cell transmission model. ACC (2012)
Xiaoming Chai, Xiaoqiang Tang, Lewei Tang, Qiujian Lu
Error modeling and accuracy analysis of a multi-level hybrid support robot. ICRA (2012)
Zhufeng Shao, Xiaoqiang Tang, Xu Chen, Liping Wang
Driving force analysis for the secondary adjustable system in FAST. Robotica 29 (6) (2011)
Kongshu Deng, Xiaoqiang Tang, Liping Wang, Pingfa Feng, Xu Chen
On the Analysis of Force Transmission Performance for the Thrust Systems of Shield Tunneling Machines. ICIRA (2009)
Xin-Jun Liu, Xiaoqiang Tang, Jinsong Wang
HANA: a novel spatial parallel manipulator with one rotational and two translational degrees of freedom. Robotica 23 (2) (2005)
Hengbin Liao, Tiemin Li, Xiaoqiang Tang
Singularity analysis of redundant parallel manipulators. SMC (5) (2004)
Xin-Jun Liu, Xiaoqiang Tang, Jinsong Wang
A novel 2-DOF parallel mechanism based design of a new 5-axis hybrid machine tool. ICRA (2003)
Chunshen Lin, Xiaoqiang Tang, Junshan Shi, Guangdong Duan
Workspace analysis of reconfigurable parallel machine tool based on setting-angle of spherical joint. SMC (2003)
Xiaoqiang Tang, Peiqing Ye, Jinsong Wang
Inverse dynamics analysis and application of a 4-DOF hybrid machine tool. SMC (2003)
Jinsong Wang, Xiaoqiang Tang, Guanhong Duan, Jianfeng Li
Dimensional design Methodology for a Novel Planar Three Degrees of Freedom Parallel Machine Tool. ICRA (2001)