Jerry Y. H. Fuh

Publication Activity (10 Years)

Years Active: 1996-2020
Publications (10 Years): 5

Top Topics

Rbf Neural Network

Unmanned Aerial Vehicles

Genetic Algorithm

Error Compensation

Top Venues

Control. Intell. Syst.

Publications

Ning Liu, K. Ren, W. Zhang, Y. F. Zhang, Y. X. Chew, Jerry Y. H. Fuh, G. J. Bi
An Evolutional Algorithm for Automatic 2D Layer Segmentation in Laser-aided Additive Manufacturing. CoRR (2020)
Hongying Zhang, A. Senthil Kumar, Jerry Y. H. Fuh, Michael Yu Wang
Topology optimized design, fabrication and evaluation of a multimaterial soft gripper. RoboSoft (2018)
Hongying Zhang, Michael Yu Wang, Feifei Chen, Yiqiang Wang, A. Senthil Kumar, Jerry Y. H. Fuh
Design and development of a soft gripper with topology optimization. IROS (2017)
Rui Yang, Kok Kiong Tan, Arthur Tay, Sunan Huang, Jie Sun, Jerry Y. H. Fuh, Yoke San Wong, Chek Sing Teo, Zidong Wang
An RBF neural network approach to geometric error compensation with displacement measurements only. Neural Comput. Appl. 28 (6) (2017)
Jingjing Wang, Yunfeng Zhang, L. Geng, Jerry Y. H. Fuh, S. H. Teo
A Heuristic Mission Planning Algorithm for Heterogeneous Tasks with Heterogeneous UAVs. Unmanned Syst. 3 (3) (2015)
J. J. Wang, Yunfeng Zhang, L. Geng, Jerry Y. H. Fuh, S. H. Teo
Mission planning for heterogeneous tasks with heterogeneous UAVs. ICARCV (2014)
Rui Yang, Jerry Y. H. Fuh, Jie Sun, Arthur Tay, Kok Kiong Tan
Displacement and thermal error compensation using RBF Networks. Control. Intell. Syst. 42 (4) (2014)
L. Geng, Y. F. Zhang, P. F. Wang, J. J. Wang, Jerry Y. H. Fuh, S. H. Teo
UAV surveillance mission planning with gimbaled sensors. ICCA (2014)
L. Geng, Y. F. Zhang, J. J. Wang, Jerry Y. H. Fuh, S. H. Teo
Cooperative Task Planning for Multiple Unmanned Aerial Vehicles using a Genetic Algorithm. Control. Intell. Syst. 42 (2) (2014)
J. Sun, Jerry Y. H. Fuh, E. S. Thian, Geok Soon Hong, Yoke San Wong, R. Yang, Kok Kiong Tan
Fabrication of electronic devices with multi-material drop-on-demand dispensing system. Int. J. Comput. Integr. Manuf. 26 (10) (2013)
L. Geng, Yunfeng Zhang, J. J. Wang, Jerry Y. H. Fuh, S. H. Teo
Mission planning of autonomous UAVs for urban surveillance with evolutionary algorithms. ICCA (2013)
L. Geng, Yunfeng Zhang, J. J. Wang, Jerry Y. H. Fuh, S. H. Teo
Cooperative task planning for multiple autonomous UAVs with graph representation and genetic algorithm. ICCA (2013)
Min Li, Yunfeng Zhang, Jerry Y. H. Fuh, Z. M. Qiu
Design reusability assessment for effective CAD model retrieval and reuse. Int. J. Comput. Appl. Technol. 40 (1/2) (2011)
K. P. Zhu, Yoke San Wong, Wen Feng Lu, Jerry Y. H. Fuh
A diffusion wavelet approach for 3-D model matching. Comput. Aided Des. 41 (1) (2009)
Kunpeng Zhu, Yoke San Wong, Han Tong Loh, Wen Feng Lu, Jerry Y. H. Fuh
3D CAD model search: A regularized manifold learning approach. ROBIO (2009)
Yifa Wang, Yunfeng Zhang, Jerry Y. H. Fuh
Using Hybrid Particle Swarm Optimization for Process Planning Problem. CSO (1) (2009)
Min Li, Jerry Y. H. Fuh, Yunfeng Zhang, Shuming Gao
Adaptive granular concurrency control for replicated collaborative feature modeling. CSCWD (2008)
Min Li, Shuming Gao, Jerry Y. H. Fuh, Yunfeng Zhang
Replicated concurrency control for collaborative feature modelling: A fine granular approach. Comput. Ind. 59 (9) (2008)
Yongsheng Ma, Jerry Y. H. Fuh
Product lifecycle modelling, analysis and management. Comput. Ind. 59 (2-3) (2008)
Yifa Wang, Yunfeng Zhang, Jerry Y. H. Fuh, Zude Zhou, Ligong Xue, Ping Lou
A web-based integrated process planning and scheduling system. CASE (2008)
H. Z. Jia, Jerry Y. H. Fuh, Andrew Y. C. Nee, Yunfeng Zhang
Integration of genetic algorithm and Gantt chart for job shop scheduling in distributed manufacturing systems. Comput. Ind. Eng. 53 (2) (2007)
Z. M. Qiu, K. F. Kok, Yoke San Wong, Jerry Y. H. Fuh
Role-based 3D visualisation for asynchronous PLM collaboration. Comput. Ind. 58 (8-9) (2007)
Y. Tang, Han Tong Loh, Jerry Y. H. Fuh, Yoke San Wong, L. Lu
Direct laser sintering of Cu-based metal for rapid tooling. Int. J. Comput. Appl. Technol. 28 (1) (2007)
Min Li, Shuming Gao, Jerry Y. H. Fuh, Yunfeng Zhang
A Fine Granular Concurrency Control Mechanism for a Peer-to-Peer Cooperative Design Environment. CSCWD (2007)
S. H. Wu, Jerry Y. H. Fuh, K. S. Lee
Semi-automated parametric design of gating systems for die-casting die. Comput. Ind. Eng. 53 (2) (2007)
Y. Ning, Yoke San Wong, Jerry Y. H. Fuh, Han Tong Loh
An approach to minimize build errors in direct metal laser sintering. IEEE Trans Autom. Sci. Eng. 3 (1) (2006)
L. L. Li, Yunfeng Zhang, Andrew Y. C. Nee, Jerry Y. H. Fuh, Yoke San Wong, M. Yeung, Z. Gui
Accessibility comparison for optimal cutter selection in five-axis finish milling of sculptured surfaces. Int. J. Manuf. Res. 1 (2) (2006)
C. Lu, Jerry Y. H. Fuh, Yoke San Wong, Z. M. Qiu, Weidong Li, Y. Q. Lu
Design Modification in a Collaborative Assembly Design Environment. J. Comput. Inf. Sci. Eng. 6 (2) (2006)
Jerry Y. H. Fuh, Weidong Li
Advances in collaborative CAD: the-state-of-the art. Comput. Aided Des. 37 (5) (2005)
Weidong Li, Wen Feng Lu, Jerry Y. H. Fuh, Yoke San Wong
Collaborative computer-aided design - research and development status. Comput. Aided Des. 37 (9) (2005)
Mani Mahesh, Jerry Y. H. Fuh, Yoke San Wong, Han Tong Loh
Benchmarking for decision making in rapid prototyping systems. CASE (2005)
Yong Yang, Jerry Y. H. Fuh, Han Tong Loh, Yoke San Wong
Minimizing staircase errors in the orthogonal layered manufacturing system. IEEE Trans Autom. Sci. Eng. 2 (3) (2005)
Jerry Y. H. Fuh, Andrew Y. C. Nee
Distributed CAD for supporting Internet collaborative design. Comput. Aided Des. 36 (9) (2004)
Weidong Li, Jerry Y. H. Fuh, Yoke San Wong
An Internet-enabled integrated system for co-design and concurrent engineering. Comput. Ind. 55 (1) (2004)
Z. M. Qiu, Yoke San Wong, Jerry Y. H. Fuh, Y. P. Chen, Zude Zhou, Weidong Li, Y. Q. Lu
Geometric model simplification for distributed CAD. Comput. Aided Des. 36 (9) (2004)
Ernest Y. T. Tan, A. Senthil Kumar, Jerry Y. H. Fuh, Andrew Y. C. Nee
Modeling, analysis, and verification of optimal fixturing design. IEEE Trans Autom. Sci. Eng. 1 (2) (2004)
Weidong Li, Soh-Khim Ong, Jerry Y. H. Fuh, Yoke San Wong, Y. Q. Lu, Andrew Y. C. Nee
Feature-based design in a distributed and collaborative environment. Comput. Aided Des. 36 (9) (2004)
Jerry Y. H. Fuh
More Productive with Internet?: Internet Applications in Product Design and Manufacturing. Comput. Aided Des. 36 (13) (2004)
L. P. Zhang, Jerry Y. H. Fuh, Andrew Y. C. Nee
Tool path regeneration for mold design modification. Comput. Aided Des. 35 (9) (2003)
H. Z. Jia, Andrew Y. C. Nee, Jerry Y. H. Fuh, Yunfeng Zhang
A modified genetic algorithm for distributed scheduling problems. J. Intell. Manuf. 14 (3-4) (2003)
Yong Yang, Han Tong Loh, Jerry Y. H. Fuh, Yoke San Wong
Feature extraction and volume decomposition for orthogonal layered manufacturing. Comput. Aided Des. 35 (12) (2003)
M. W. Fu, Andrew Y. C. Nee, Jerry Y. H. Fuh
The application of surface visibility and moldability to parting line generation. Comput. Aided Des. 34 (6) (2002)
H. Z. Jia, Jerry Y. H. Fuh, Andrew Y. C. Nee, Yunfeng Zhang
Web-based Multi-functional Scheduling System for a Distributed Manufacturing Environment. Concurr. Eng. Res. Appl. 10 (1) (2002)
Ye Xian Gao, Jerry Y. H. Fuh, Kim Seng Lee
A hybrid method for recognition of undercut features from moulded parts. Comput. Aided Des. 33 (14) (2001)
X. M. Ding, Jerry Y. H. Fuh, Kim Seng Lee
Interference detection for 3-axis mold machining. Comput. Aided Des. 33 (8) (2001)
S. B. Kailash, Yunfeng Zhang, Jerry Y. H. Fuh
A volume decomposition approach to machining feature extraction of casting and forging components. Comput. Aided Des. 33 (8) (2001)
Yong Yang, Jerry Y. H. Fuh, Han Tong Loh, Yun Gan Wang
An Efficient Scanning Pattern for Layered Manufacturing Processes. ICRA (2001)
W. L. Wang, James G. Conley, Y. N. Yan, Jerry Y. H. Fuh
Towards intelligent setting of process parameters for layered manufacturing. J. Intell. Manuf. 11 (1) (2000)
A. Senthil Kumar, Jerry Y. H. Fuh, T. S. Kow
An automated design and assembly of interference-free modular fixture setup. Comput. Aided Des. 32 (10) (2000)
M. W. Fu, Jerry Y. H. Fuh, Andrew Y. C. Nee
Undercut feature recognition in an injection mould design system. Comput. Aided Des. 31 (12) (1999)
W. He, Y. F. Zhang, K. S. Lee, Jerry Y. H. Fuh, Andrew Y. C. Nee
Automated process parameter resetting for injection moulding: a fuzzy-neuro approach. J. Intell. Manuf. 9 (1) (1998)
Yifa Wang, Jerry Y. H. Fuh, Yoke San Wong
A model-based online control of optimal fixturing process. ICRA (1997)
Jerry Y. H. Fuh, Chao-Hwa Chang, Michel A. Melkanoff
The development of an integrated and intelligent CAD/CAPP/CAFP environment using logic-based reasoning. Comput. Aided Des. 28 (3) (1996)