Stéphane Dauzère-Pérès

ORCID

Publication Activity (10 Years)

Years Active: 1996-2024
Publications (10 Years): 76

Top Venues

Publications

Wei-Ting Yang, Karim Tamssaouet, Stéphane Dauzère-Pérès
Bayesian network structure learning using scatter search. Knowl. Based Syst. 300 (2024)
Nabil Absi, Wilco van den Heuvel, Stéphane Dauzère-Pérès
Complexity analysis of integrated dynamic lot sizing and maintenance planning problems. Eur. J. Oper. Res. 318 (1) (2024)
Rahman Torba, Stéphane Dauzère-Pérès, Claude Yugma, Cédric Gallais, Juliette Pouzet
Solving a real-life multi-skill resource-constrained multi-project scheduling problem. Ann. Oper. Res. 338 (1) (2024)
Stéphane Dauzère-Pérès, Junwen Ding, Liji Shen, Karim Tamssaouet
The flexible job shop scheduling problem: A review. Eur. J. Oper. Res. 314 (2) (2024)
Lucas Berterottière, Stéphane Dauzère-Pérès, Claude Yugma
Flexible job-shop scheduling with transportation resources. Eur. J. Oper. Res. 312 (3) (2024)
Junwen Ding, Stéphane Dauzère-Pérès, Liji Shen, Zhipeng Lü
A Novel Evolutionary Algorithm for Energy-Efficient Scheduling in Flexible Job Shops. IEEE Trans. Evol. Comput. 27 (5) (2023)
Karim Tamssaouet, Stéphane Dauzère-Pérès
A general efficient neighborhood structure framework for the job-shop and flexible job-shop scheduling problems. Eur. J. Oper. Res. 311 (2) (2023)
Melek Rodoplu, Stéphane Dauzère-Pérès, Philippe Vialletelle
Integrated planning of maintenance operations and workload allocation. Int. J. Prod. Res. 61 (23) (2023)
Bin Liu, Kerem Akartunali, Stéphane Dauzère-Pérès, Shaomin Wu
Special issue on collaborative production and maintenance in the environment of big data and industry 4.0. Int. J. Prod. Res. 61 (23) (2023)
Xiaolan Xie, Stéphane Dauzère-Pérès
Guest Editorial Special Issue on the 2021 International Conference on Automation Science and Engineering. IEEE Trans Autom. Sci. Eng. 20 (3) (2023)
Stéphane Dauzère-Pérès, Sigrid Lise Nonås
An improved decision support model for scheduling production in an engineer-to-order manufacturer. 4OR 21 (2) (2023)
Mario Flores Gómez, Valeria Borodin, Stéphane Dauzère-Pérès
Maximizing the service level on the makespan in the stochastic flexible job-shop scheduling problem. Comput. Oper. Res. 157 (2023)
Félicien Barhebwa-Mushamuka, Stéphane Dauzère-Pérès, Claude Yugma
A global scheduling approach for cycle time control in complex manufacturing systems. Int. J. Prod. Res. 61 (2) (2023)
Liji Shen, Stéphane Dauzère-Pérès, Söhnke Maecker
Energy cost efficient scheduling in flexible job-shop manufacturing systems. Eur. J. Oper. Res. 310 (3) (2023)
Erna S. Engebrethsen, Stéphane Dauzère-Pérès
Transportation strategies for dynamic lot sizing: single or multiple modes? Int. J. Prod. Res. 61 (20) (2023)
Adrien Wartelle, Stéphane Dauzère-Pérès, Claude Yugma, Quentin Christ, Renaud Roussel
A Study on The Impact of Lot Priorities on Cycle Times In Semiconductor Manufacturing. WSC (2023)
Quentin Christ, Stéphane Dauzère-Pérès, Guillaume Lepelletier
A three-step approach for decision support in operational production planning of complex manufacturing systems. Int. J. Prod. Res. 61 (17) (2023)
Lucas Berterottière, Stéphane Dauzère-Pérès, Claude Yugma
Complexity and Solution Methods for a Single-Machine Scheduling Problem with Limited Buffer Space and Transportation Resource. CASE (2023)
Lu Chen, Wenhui Yang, Kejun Qiu, Stéphane Dauzère-Pérès
A lexicographic optimization approach for a bi-objective parallel-machine scheduling problem minimizing total quality loss and total tardiness. Comput. Oper. Res. 155 (2023)
Louise Penz, Stéphane Dauzère-Pérès, Margaux Nattaf
Minimizing the sum of completion times on a single machine with health index and flexible maintenance operations. Comput. Oper. Res. 151 (2023)
Antoine Perraudat, Stéphane Dauzère-Pérès, Philippe Vialletelle
Optimizing multiple qualifications of products on non-identical parallel machines. Comput. Oper. Res. 144 (2022)
Liji Shen, Stéphane Dauzère-Pérès, Janis S. Neufeld
Corrigendum to: "Solving the flexible job shop scheduling problem with sequence-dependent setup times", [European Journal of Operational Research 265, 503-516, 2018]. Eur. J. Oper. Res. 296 (2) (2022)
Kerem Akartunali, Stéphane Dauzère-Pérès
Dynamic lot sizing with stochastic demand timing. Eur. J. Oper. Res. 302 (1) (2022)
Karim Tamssaouet, Stéphane Dauzère-Pérès, Sebastian Knopp, Abdoul Bitar, Claude Yugma
Multiobjective optimization for complex flexible job-shop scheduling problems. Eur. J. Oper. Res. 296 (1) (2022)
Benjamin Anthouard, Valeria Borodin, Stéphane Dauzère-Pérès, Quentin Christ, Renaud Roussel
Criticality Measures for Time Constraint Tunnels in Semiconductor Manufacturing. WSC (2022)
Antoine Perraudat, Stéphane Dauzère-Pérès, Scott Jennings Mason
Stochastic programming approaches for an energy-aware lot-sizing and sequencing problem with incentive. Int. J. Prod. Res. 60 (19) (2022)
Wenhui Yang, Lu Chen, Stéphane Dauzère-Pérès
A dynamic optimisation approach for a single machine scheduling problem with machine conditions and maintenance decisions. Int. J. Prod. Res. 60 (10) (2022)
Jérémy Berthier, Stéphane Dauzère-Pérès, Claude Yugma, Rémi Poinas, Alexandre Lima
Study of Relationships Between Scheduling Objectives in Semiconductor Manufacturing. WSC (2022)
Sebastien Beraudy, Nabil Absi, Stéphane Dauzère-Pérès
Timed route approaches for large multi-product multi-step capacitated production planning problems. Eur. J. Oper. Res. 300 (2) (2022)
Mehdi Charles, Stéphane Dauzère-Pérès, Safia Kedad-Sidhoum, Issam Mazhoud
Motivations and analysis of the capacitated lot-sizing problem with setup times and minimum and maximum ending inventories. Eur. J. Oper. Res. 302 (1) (2022)
Félicien Barhebwa-Mushamuka, Stéphane Dauzère-Pérès, Claude Yugma
Push and Time at Operation strategies for cycle time minimization in global fab scheduling for semiconductor manufacturing. CASE (2021)
Mario Flores Gómez, Valeria Borodin, Stéphane Dauzère-Pérès
A Monte Carlo based method to maximize the service level on the makespan in the stochastic flexible job-shop scheduling problem. CASE (2021)
Alexandre Lima, Valeria Borodin, Stéphane Dauzère-Pérès, Philippe Vialletelle
A sampling-based approach for managing lot release in time constraint tunnels in semiconductor manufacturing. Int. J. Prod. Res. 59 (3) (2021)
Abdelhak Khemiri, Claude Yugma, Stéphane Dauzère-Pérès
Towards A Generic Semiconductor Manufacturing Simulation Model. WSC (2021)
Abdoul Bitar, Stéphane Dauzère-Pérès, Claude Yugma
Unrelated parallel machine scheduling with new criteria: Complexity and models. Comput. Oper. Res. 132 (2021)
Mehdi Charles, Stéphane Dauzère-Pérès, Safia Kedad-Sidhoum, Issam Mazhoud
Capacitated lot-sizing problem with inventory constraints within periods. CASE (2021)
Étienne Le Quéré, Stéphane Dauzère-Pérès, Karim Tamssaouet, Cédric Maufront, Stéphane Astie
Dynamic Sampling for Risk Minimization in Semiconductor Manufacturing. WSC (2020)
Estelle Altazin, Stéphane Dauzère-Pérès, François Ramond, Sabine Tréfond
A multi-objective optimization-simulation approach for real time rescheduling in dense railway systems. Eur. J. Oper. Res. 286 (2) (2020)
Mehrdad Mohammadi, Stéphane Dauzère-Pérès, Claude Yugma, Maryam Karimi Mamaghan
A queue-based aggregation approach for performance evaluation of a production system with an AMHS. Comput. Oper. Res. 115 (2020)
Hugo Belhomme, Stéphane Dauzère-Pérès, Mathieu Gagnon, François Ramond
Using a new multi-objective concept for real time rescheduling in dense railway systems. ITSC (2020)
Cheng-Hung Wu, Fang-Yi Zhou, Chi-Kang Tsai, Cheng-Juei Yu, Stéphane Dauzère-Pérès
A deep learning approach for the dynamic dispatching of unreliable machines in re-entrant production systems. Int. J. Prod. Res. 58 (9) (2020)
Lucas Aresi, Stéphane Dauzère-Pérès, Claude Yugma, Moulaye Aidara Ndiaye, Lionel Rulliere
Optimizing the Allocation of Single-Lot Stockers in an AMHS in Semiconductor Manufacturing. WSC (2020)
Peter Lendermann, Stéphane Dauzère-Pérès, Leon F. McGinnis, Lars Mönch, Tina O'Donnell, Georg Seidel, Philippe Vialletelle
Scheduling and Simulation in wafer fabs: Competitors, Independent Players or Amplifiers? WSC (2020)
Stéphane Dauzère-Pérès, Michael Hassoun
On the importance of variability when managing metrology capacity. Eur. J. Oper. Res. 282 (1) (2020)
Cheng-Hung Wu, Yi-Chun Yao, Stéphane Dauzère-Pérès, Cheng-Juei Yu
Dynamic dispatching and preventive maintenance for parallel machines with dispatching-dependent deterioration. Comput. Oper. Res. 113 (2020)
Chen-Fu Chien, Stéphane Dauzère-Pérès, Woonghee Tim Huh, Young Jae Jang, James R. Morrison
Artificial intelligence in manufacturing and logistics systems: algorithms, applications, and case studies. Int. J. Prod. Res. 58 (9) (2020)
Alexandre Moritz, Stéphane Dauzère-Pérès, Oussama Ben Ammar, Philippe Vialletelle
Maintenance with Production Planning Constraints in Semiconductor Manufacturing. WSC (2020)
Stéphane Dauzère-Pérès, Michael Hassoun, Alejandro Sendón
A Lagrangian heuristic for minimising risk using multiple heterogeneous metrology tools. Int. J. Prod. Res. 58 (4) (2020)
Félicien Barhebwa-Mushamuka, Stéphane Dauzère-Pérès, Claude Yugma
Multi-objective optimization for Work-In-Process balancing and throughput maximization in global fab scheduling. CASE (2019)
Margaux Nattaf, Stéphane Dauzère-Pérès, Claude Yugma, Cheng-Hung Wu
Parallel machine scheduling with time constraints on machine qualifications. Comput. Oper. Res. 107 (2019)
Andrés Alberto García-León, Stéphane Dauzère-Pérès, Yazid Mati
An efficient Pareto approach for solving the multi-objective flexible job-shop scheduling problem with regular criteria. Comput. Oper. Res. 108 (2019)
Quentin Christ, Stéphane Dauzère-Pérès, Guillaume Lepelletier
An Iterated Min-Max procedure for practical workload balancing on non-identical parallel machines in manufacturing systems. Eur. J. Oper. Res. 279 (2) (2019)
Alexandre Lima, Valeria Borodin, Stéphane Dauzère-Pérès, Philippe Vialletelle
Sampling-based release control of multiple lots in time constraint tunnels. Comput. Ind. 110 (2019)
Antoine Perraudat, Stéphane Dauzère-Pérès, Philippe Vialletelle
Evaluating the Impact of Dynamic Qualification Management in Semiconductor Manufacturing. WSC (2019)
Mehrdad Mohammadi, Stéphane Dauzère-Pérès, Claude Yugma
Performance evaluation of single and multi-class production systems using an approximating queuing network. Int. J. Prod. Res. 57 (5) (2019)
Erna S. Engebrethsen, Stéphane Dauzère-Pérès
Transportation mode selection in inventory models: A literature review. Eur. J. Oper. Res. 279 (1) (2019)
Félicien Barhebwa-Mushamuka, Stéphane Dauzère-Pérès, Claude Yugma
Work-in-Process Balancing Control in Global Fab Scheduling for Semiconductor Manufacturing. WSC (2019)
Ahmed Senoussi, Stéphane Dauzère-Pérès, Nadjib Brahimi, Bernard Penz, Nadia Kinza Mouss
Heuristics Based on Genetic Algorithms for the Capacitated Multi Vehicle Production Distribution Problem. Comput. Oper. Res. 96 (2018)
Nabil Absi, Claudia Archetti, Stéphane Dauzère-Pérès, Dominique Feillet, M. Grazia Speranza
Comparing sequential and integrated approaches for the production routing problem. Eur. J. Oper. Res. 269 (2) (2018)
Georg Laipple, Stéphane Dauzère-Pérès, Thomas Ponsignon, Philippe Vialletelle
Generic Data Model for semiconductor manufacturing supply Chains. WSC (2018)
Liji Shen, Stéphane Dauzère-Pérès, Janis Sebastian Neufeld
Solving the flexible job shop scheduling problem with sequence-dependent setup times. Eur. J. Oper. Res. 265 (2) (2018)
Teun Janssen, Céline M. F. Swennenhuis, Abdoul Bitar, Thomas Bosman, Dion Gijswijt, Leo van Iersel, Stéphane Dauzère-Pérès, Claude Yugma
Parallel Machine Scheduling with a Single Resource per Job. CoRR (2018)
Karim Tamssaouet, Stéphane Dauzère-Pérès, Claude Yugma, Sebastian Knopp, Jacques Pinaton
A Study on the Integration of Complex Machines in Complex Job shop Scheduling. WSC (2018)
Karim Tamssaouet, Stéphane Dauzère-Pérès, Claude Yugma
Metaheuristics for the job-shop scheduling problem with machine availability constraints. Comput. Ind. Eng. 125 (2018)
Sebastien Beraudy, Nabil Absi, Stéphane Dauzère-Pérès
Production Planning Models with productivity and Financial objective Functions in semiconductor manufacturing. WSC (2018)
Lars Mönch, Chen Fu Chien, Stéphane Dauzère-Pérès, Hans Ehm, John W. Fowler
Modelling and analysis of semiconductor supply chains. Int. J. Prod. Res. 56 (13) (2018)
Yu-Ting Kao, Stéphane Dauzère-Pérès, Jakey Blue, Shi-Chung Chang
Impact of integrating equipment health in production scheduling for semiconductor fabrication. Comput. Ind. Eng. 120 (2018)
Sebastian Knopp, Stéphane Dauzère-Pérès, Claude Yugma
A batch-oblivious approach for Complex Job-Shop scheduling problems. Eur. J. Oper. Res. 263 (1) (2017)
Alexandre Lima, Valeria Borodin, Stéphane Dauzère-Pérès, Philippe Vialletelle
Analyzing different dispatching policies for probability estimation in time constraint tunnels in semiconductor manufacturing. WSC (2017)
Stéphane Dauzère-Pérès
Achievements and lessons learned from a long-term academic-industrial collaboration. WSC (2017)
Nadjib Brahimi, Nabil Absi, Stéphane Dauzère-Pérès, Atle Nordli
Single-item dynamic lot-sizing problems: An updated survey. Eur. J. Oper. Res. 263 (3) (2017)
Moulaye Aidara Ndiaye, Stéphane Dauzère-Pérès, Claude Yugma, Lionel Rulliere, Gilles Lamiable
Automated transportation of auxiliary resources in a semiconductor manufacturing facility. WSC (2016)
Abdoul Bitar, Stéphane Dauzère-Pérès, Claude Yugma, Renaud Roussel
A memetic algorithm to solve an unrelated parallel machine scheduling problem with auxiliary resources in semiconductor manufacturing. J. Sched. 19 (4) (2016)
Nabil Absi, Stéphane Dauzère-Pérès, Safia Kedad-Sidhoum, Bernard Penz, Christophe Rapine
The single-item green lot-sizing problem with fixed carbon emissions. Eur. J. Oper. Res. 248 (3) (2016)
Amelie Pianne, Luis Rivero, Stéphane Dauzère-Pérès, Philippe Vialletelle
Ideal and potential flexibility measures for qualification management in semiconductor manufacturing. WSC (2016)
Stéphane Dauzère-Pérès, Michael Hassoun, Alejandro Sendón
Optimizing capacity assignment of multiple identical metrology tools. WSC (2016)
Claude Yugma, Jakey Blue, Stéphane Dauzère-Pérès, Ali Obeid
Integration of scheduling and advanced process control in semiconductor manufacturing: review and outlook. J. Sched. 18 (2) (2015)
Gloria Luz Rodríguez-Verján, Stéphane Dauzère-Pérès, Jacques Pinaton
Optimized allocation of defect inspection capacity with a dynamic sampling strategy. Comput. Oper. Res. 53 (2015)
Alejandro Sendón, Stéphane Dauzère-Pérès, Jacques Pinaton
Simulation model to control risk levels on process equipment through metrology in semiconductor manufacturing. WSC (2015)
Nadjib Brahimi, Stéphane Dauzère-Pérès
A Lagrangian heuristic for capacitated single item lot sizing problems. 4OR 13 (2) (2015)
Nadjib Brahimi, Nabil Absi, Stéphane Dauzère-Pérès, Safia Kedad-Sidhoum
Models and Lagrangian heuristics for a two-level lot-sizing problem with bounded inventory. OR Spectr. 37 (4) (2015)
Cathy Wolosewicz, Stéphane Dauzère-Pérès, Riad Aggoune
A Lagrangian heuristic for an integrated lot-sizing and fixed scheduling problem. Eur. J. Oper. Res. 244 (1) (2015)
Nabil Absi, Claudia Archetti, Stéphane Dauzère-Pérès, Dominique Feillet
A Two-Phase Iterative Heuristic Approach for the Production Routing Problem. Transp. Sci. 49 (4) (2015)
Mehdi Rowshannahad, Stéphane Dauzère-Pérès, Bernard Cassini
Qualification management to reduce workload variability in semiconductor manufacturing. WSC (2014)
Ali Obeid, Stéphane Dauzère-Pérès, Claude Yugma
Scheduling job families on non-identical parallel machines with time constraints. Ann. Oper. Res. 213 (1) (2014)
Claude Yugma, Jakey Blue, Stéphane Dauzère-Pérès, Philippe Vialletelle
Integration of scheduling and advanced process control in semiconductor manufacturing: review and outlook. CASE (2014)
Sylvain Housseman, Stéphane Dauzère-Pérès, Gloria Rodríguez-Verján, Jacques Pinaton
Smart dynamic sampling for wafer at risk reduction in semiconductor manufacturing. CASE (2014)
Abdoul Bitar, Stéphane Dauzère-Pérès, Claude Yugma
On the importance of optimizing in scheduling: the photolithography workstation. WSC (2014)
Sebastian Knopp, Stéphane Dauzère-Pérès, Claude Yugma
Flexible job-shop scheduling with extended route flexibility for semiconductor manufacturing. WSC (2014)
Stéphane Dauzère-Pérès, Lars Mönch
Scheduling jobs on a single batch processing machine with incompatible job families and weighted number of tardy jobs objective. Comput. Oper. Res. 40 (5) (2013)
Ahmed Ben Chaabane, Stéphane Dauzère-Pérès, Claude Yugma, Lionel Rulliere, Gilles Lamiable
Analyzing the impact of key parameters of vehicle management policies in a unified AMHS. WSC (2013)
Mehdi Rowshannahad, Stéphane Dauzère-Pérès
Qualification management with batch size constraint. WSC (2013)
Nabil Absi, Stéphane Dauzère-Pérès, Safia Kedad-Sidhoum, Bernard Penz, Christophe Rapine
Lot sizing with carbon emission constraints. Eur. J. Oper. Res. 227 (1) (2013)
Ahmed Ben Amira, Guillaume Lepelletier, Philippe Vialletelle, Stéphane Dauzère-Pérès, Claude Yugma, Philippe Lalevée
Modeling complex processability constraints in high-mix semiconductor manufacturing. WSC (2013)
Gloria Luz Rodríguez-Verján, Stéphane Dauzère-Pérès, Sylvain Housseman, Jacques Pinaton
Skipping algorithms for defect inspection using a dynamic control strategy in semiconductor manufacturing. WSC (2013)
Charlotte Jimenez, Stéphane Dauzère-Pérès, Christian Feuillebois, Eric Pauly
Optimizing the positioning and technological choices of RFID elements for aircraft part identification. Eur. J. Oper. Res. 227 (2) (2013)
Nabil Absi, Boris Detienne, Stéphane Dauzère-Pérès
Heuristics for the multi-item capacitated lot-sizing problem with lost sales. Comput. Oper. Res. 40 (1) (2013)
François Ramond, David De Almeida, Stéphane Dauzère-Pérès, Hanif D. Sherali
Optimized Rostering of Workforce Subject to Cyclic Requirements. Informatica (Slovenia) 36 (3) (2012)
Justin Nduhura Munga, Stéphane Dauzère-Pérès, Philippe Vialletelle, Claude Yugma
Industrial implementation of a dynamic sampling algorithm in semiconductor manufacturing: approach and challenges. WSC (2012)
Ali Obeid, Stéphane Dauzère-Pérès, Claude Yugma
Scheduling on parallel machines with time constraints and Equipment Health Factors. CASE (2012)

Stéphane Dauzère-Pérès.css-eqlu8i{font-size:small;padding-left:4px;}

Publication Activity (10 Years)

Top Topics

Top Venues

Stéphane Dauzère-Pérès