Jean-Pierre Kenné

Publication Activity (10 Years)

Years Active: 2001-2024
Publications (10 Years): 13

Top Topics

Sliding Mode Control

Hybrid Architecture

Production Planning

Top Venues

Int. J. Prod. Res.

Comput. Ind. Eng.

Int. J. Math. Oper. Res.

Publications

Vladimir Polotski, Jean-Pierre Kenné, Ali Gharbi
Estimation-based production control of manufacturing-remanufacturing systems with uncertain seasonal return and imprecise demand and inventory. Int. J. Prod. Res. 62 (13) (2024)
Victor Delpla, Kévin Chapron, Jean-Pierre Kenné, Lucas A. Hof
A novel approach for predicting Lockout/Tagout safety procedures for smart maintenance strategies. Int. J. Prod. Res. 62 (13) (2024)
Camilo Mejía-Moncayo, Jean-Pierre Kenné, Lucas A. Hof
On the development of a smart architecture for a sustainable manufacturing-remanufacturing system: A literature review approach. Comput. Ind. Eng. 180 (2023)
Mahdi Mohammadi Tehrani, Mohammadsadegh Mobin, Yvan Beauregard, Michel Rioux, Jean-Pierre Kenné
Multi-scenario and multi-criteria approach to evaluate prediction techniques used to recognise failure patterns. Int. J. Appl. Decis. Sci. 14 (4) (2021)
Oluwole Olufayo, Victor Songmene, Jean-Pierre Kenné, Michael Ayomoh
Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels. Int. J. Prod. Res. 59 (17) (2021)
Camilo Mejía-Moncayo, Jean-Pierre Kenné, Lucas A. Hof
A Hybrid Architecture for a Reconfigurable Cellular Remanufacturing System. APMS (2) (2021)
Héctor Rivera-Gómez, Ali Gharbi, Jean-Pierre Kenné, Oscar Montaño Arango, Jose Ramón Corona-Armenta
Joint optimization of production and maintenance strategies considering a dynamic sampling strategy for a deteriorating system. Comput. Ind. Eng. 140 (2020)
Vladimir Polotski, Jean-Pierre Kenné, Ali Gharbi
Production control of hybrid manufacturing-remanufacturing systems under demand and return variations. Int. J. Prod. Res. 57 (1) (2019)
Samir Ouaret, Jean-Pierre Kenné, Ali Gharbi
Production and replacement policies for a deteriorating manufacturing system under random demand and quality. Eur. J. Oper. Res. 264 (2) (2018)
Bassel Shaer, Jean-Pierre Kenné, Claude Kaddissi, Charles J. Fallaha
A chattering-free fuzzy hybrid sliding mode control of an electrohydraulic active suspension. Trans. Inst. Meas. Control 40 (1) (2018)
Vladimir Polotski, Jean-Pierre Kenné, Ali Gharbi
Set-up and production planning in hybrid manufacturing-remanufacturing systems with large returns. Int. J. Prod. Res. 55 (13) (2017)
F. I. Dehayem Nodem, Jean-Pierre Kenné
Production control of a deteriorated remanufacturing system within an open-reverse supply chain. MED (2016)
Guy-Richard Kibouka, Donatien Nganga-Kouya, Jean-Pierre Kenné, Victor Songmene, Vladimir Polotski
Production Planning of a Failure-Prone Manufacturing System under Different Setup Scenarios. J. Appl. Math. 2016 (2016)
Vladimir Polotski, Jean-Pierre Kenné, Ali Gharbi
Failure-prone manufacturing systems with setups: feasibility and optimality under various hypotheses about perturbations and setup interplay. Int. J. Math. Oper. Res. 7 (6) (2015)
Mohammad Habibur Rahman, Md. Jahidur Rahman, Cristóbal Ochoa-Luna, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
Development of a whole arm wearable robotic exoskeleton for rehabilitation and to assist upper limb movements. Robotica 33 (1) (2015)
Annie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski
Analytical Modelling and Control of a Hybrid Manufacturing/remanufacturing System. MIM (2013)
Vladimir Polotski, Samir Ouaret, Jean-Pierre Kenné, Ali Gharbi
Manufacturing-Remanufacturing Failure-Prone Systems under Random Demands. MIM (2013)
Mohammad Habibur Rahman, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
Nonlinear Sliding Mode Control Implementation of an Upper Limb Exoskeleton Robot to Provide Passive Rehabilitation Therapy. ICIRA (2) (2012)
Mohammad Habibur Rahman, Maarouf Saad, Cristóbal Ochoa-Luna, Jean-Pierre Kenné, Philippe S. Archambault
Cartesian trajectory tracking of an upper limb exoskeleton robot. IECON (2012)
H. A. Mintsa, R. Venugopal, Jean-Pierre Kenné, C. Belleau
Feedback Linearization-Based Position Control of an Electrohydraulic Servo System With Supply Pressure Uncertainty. IEEE Trans. Control. Syst. Technol. 20 (4) (2012)
Achille N. Njike, Robert Pellerin, Jean-Pierre Kenné
Simultaneous control of maintenance and production rates of a manufacturing system with defective products. J. Intell. Manuf. 23 (2) (2012)
Mohammad Habibur Rahman, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault, Thierry Kittel-Ouimet
Development of a 4DoFs exoskeleton robot for passive arm movement assistance. Int. J. Mechatronics Autom. 2 (1) (2012)
Mohammad Habibur Rahman, Thierry Kittel-Ouimet, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
Nonlinear control of an upper-limb exoskelton robot. ICECS (2011)
Adnène Hajji, Ali Gharbi, Jean-Pierre Kenné, Robert Pellerin
Production control and replenishment strategy with multiple suppliers. Eur. J. Oper. Res. 208 (1) (2011)
Mohammad Habibur Rahman, Thierry Kittel-Ouimet, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
Tele-operation of a robotic exoskeleton for rehabilitation and passive arm movement assistance. ROBIO (2011)
Mohammad Habibur Rahman, Thierry Kittel-Ouimet, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
Dynamic Modeling and Evaluation of a Robotic Exoskeleton for Upper-Limb Rehabilitation. Int. J. Inf. Acquis. 8 (1) (2011)
Mohammad Habibur Rahman, Thierry Kittel-Ouimet, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
Control of a powered exoskeleton for elbow, forearm and wrist joint movements. ROBIO (2011)
Adnène Hajji, Ali Gharbi, Jean-Pierre Kenné
Joint production and supply control in three levels flexible manufacturing systems. J. Intell. Manuf. 21 (2) (2010)
Jean-Pierre Kenné, Ali Gharbi, Najib M. Najid
On the integrated production, inventory and preventive maintenance problem in manufacturing systems with backorder. Int. J. Simul. Process. Model. 5 (4) (2009)
Mohammad Habibur Rahman, Maarouf Saad, Jean-Pierre Kenné, Philippe S. Archambault
Modeling and control of a 7DOF exoskeleton robot for arm movements. ROBIO (2009)
F. I. Dehayem Nodem, Jean-Pierre Kenné, Anis Gharbi
Hierarchical decision making in production and repair/replacement planning with imperfect repairs under uncertainties. Eur. J. Oper. Res. 198 (1) (2009)
Robert Pellerin, Jean-François Boulet, Ali Gharbi, Jean-Pierre Kenné
Développement d'une politique intégrée de contrôle des taux de production et de maintenance corrective avec diagnostic. INFOR Inf. Syst. Oper. Res. 45 (4) (2007)
Jean-Pierre Kenné, Anis Gharbi, M. Beit
Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale. Eur. J. Oper. Res. 178 (2) (2007)
Ali Gharbi, Jean-Pierre Kenné
Maintenance scheduling and production control of multiple-machine manufacturing systems. Comput. Ind. Eng. 48 (4) (2005)
Jean-Pierre Kenné, Ali Gharbi
A simulation optimization based control policy for failure prone one-machine, two-product manufacturing systems. Comput. Ind. Eng. 46 (2) (2004)
Jean-Pierre Kenné, Ali Gharbi
Stohastic optimal production control problem with corrective maintenance. Comput. Ind. Eng. 46 (4) (2004)
Claude Kaddissi, Jean-Pierre Kenné, Maarouf Saad
Position Control of an Electro-Hydraulic Servosystem - A Non-Linear Backstepping Approach. ICINCO (2) (2004)
Jean-Pierre Kenné, Ali Gharbi
A simulation optimization approach in production planning of failure prone manufacturing systems. J. Intell. Manuf. 12 (5-6) (2001)