Michael F. Zaeh

Publication Activity (10 Years)

Years Active: 2003-2024
Publications (10 Years): 20

Top Topics

Renewable Energy Sources

Gaussian Process

Active Vibration Control

Top Venues

Int. J. Autom. Technol.

Robotics Comput. Integr. Manuf.

Publications

Christian Bernauer, Philipp Leitner, Avelino Zapata, Pawel Garkusha, Sophie Grabmann, Maximilian Schmoeller, Michael F. Zaeh
Segmentation-based closed-loop layer height control for enhancing stability and dimensional accuracy in wire-based laser metal deposition. Robotics Comput. Integr. Manuf. 86 (2024)
Patrick M. Praegla, Thomas Mair, Andreas Wimmer, Sebastian L. Fuchs, Niklas Fehn, Michael F. Zaeh, Wolfgang A. Wall, Christoph Meier
Towards Additively Manufactured Metamaterials with Powder Inclusions for Controllable Dissipation: The Critical Influence of Packing Density. CoRR (2023)
Sebastian Kroeger, Svenja Korder, Robin Schneider, Michael F. Zaeh
Sequence Scrambling in Aggregated Mixed-Model Production Line Modeling. WSC (2022)
Maximilian Busch, Florian Schnoes, Amr Elsharkawy, Michael F. Zaeh
Methodology for model-based uncertainty quantification of the vibrational properties of machining robots. Robotics Comput. Integr. Manuf. 73 (2022)
Maximilian Busch, Michael F. Zaeh
Multi-Fidelity Information Fusion to Model the Position-Dependent Modal Properties of Milling Robots. Robotics 11 (1) (2022)
Maximilian Benker, Artem Bliznyuk, Michael F. Zaeh
A Gaussian Process Based Method for Data- Efficient Remaining Useful Life Estimation. IEEE Access 9 (2021)
Julia Schulz, Felix Rosenberg, Valerie M. Scharmer, Michael F. Zaeh
Characterization of Energy Consumers in Production Systems with Renewable On-Site Power Generation. APMS (1) (2020)
Johannes Weirather, Vladyslav Rozov, Mario Wille, Paul Schuler, Christian Seidel, Nikolaus A. Adams, Michael F. Zaeh
A Smoothed Particle Hydrodynamics Model for Laser Beam Melting of Ni-based Alloy 718. Comput. Math. Appl. 78 (7) (2019)
Robin Kleinwort, Jonathan Platz, Michael F. Zaeh
Adaptive Active Vibration Control for Machine Tools with Highly Position-Dependent Dynamics. Int. J. Autom. Technol. 12 (5) (2018)
Michael F. Zaeh
Editorial: Active and Passive Vibration Damping in Machine Tools. Int. J. Autom. Technol. 12 (5) (2018)
Robin Kleinwort, Philipp Weishaupt, Michael F. Zaeh
Simulation-Based Dimensioning of the Required Actuator Force for Active Vibration Control. Int. J. Autom. Technol. 12 (5) (2018)
Sepp Wimmer, Johannes Ellinger, Michael F. Zaeh
A cutting force model for finishing processes using helical end mills with significant runout. Prod. Eng. 12 (6) (2018)
Aydin Nassehi, Dirk Schaefer, Dazhong Wu, Xun Xu, Michael F. Zaeh
Special issue on 'Cyber-physical product creation for Industry 4.0'. Int. J. Comput. Integr. Manuf. 31 (7) (2018)
Georgios D. Theodossiadis, Michael F. Zaeh
In-situ investigation of the thermal reaction properties of multilayered aluminum-nickel nanofoils. Prod. Eng. 11 (4-5) (2017)
Georgios D. Theodossiadis, Michael F. Zaeh
Erratum to: Study of the kinetic and energetic reaction properties of multilayered aluminum-nickel nanofoils. Prod. Eng. 11 (4-5) (2017)
Sebastian J. Pieczona, Simon Zollitsch, Michael F. Zaeh
Dynamics enhancement of galvanometer laser scanners by adaptive inverse control. AIM (2017)
Georgios D. Theodossiadis, Michael F. Zaeh
Study of the heat affected zone within metals joined by using reactive multilayered aluminum-nickel nanofoils. Prod. Eng. 11 (4-5) (2017)
Georgios D. Theodossiadis, Michael F. Zaeh
Study of the kinetic and energetic reaction properties of multilayered aluminum-nickel nanofoils. Prod. Eng. 11 (3) (2017)
Georgios D. Theodossiadis, Michael F. Zaeh
Assessment of the technological potential and maturity of a novel joining technique based on reactive nanofoils. Prod. Eng. 11 (3) (2017)
Christian Rebelein, Michael F. Zaeh
Friction in feed drives of machine tools: investigation, modeling and validation. Prod. Eng. 10 (4-5) (2016)
Conrad W. P. Fischbach, Michael F. Zaeh, Martin Mair
Identifying the Benefits of Fiber Reinforced Plastics for Their Use in Machine Tool Structures. Int. J. Autom. Technol. 9 (6) (2015)
Philipp A. Schmidt, Michael F. Zaeh
Laser beam welding of electrical contacts of lithium-ion batteries for electric- and hybrid-electric vehicles. Prod. Eng. 9 (5-6) (2015)
Michael F. Zaeh, Oliver Roesch
Improvement of the machining accuracy of milling robots. Prod. Eng. 8 (6) (2014)
Stefan Schwarz, A. Sing, Michael F. Zaeh
Identification and evaluation of uncertainties and errors in dynamic models of casted machine tool components. Prod. Eng. 8 (1-2) (2014)
Gregory A. Hyatt, Masahiko Mori, Tobias Föckerer, Michael F. Zaeh, Nils Niemeyer, Michael Duscha
Integration of heat treatment into the process chain of a mill turn center by enabling external cylindrical grind-hardening. Prod. Eng. 7 (6) (2013)
Martin Ostgathe, Michael F. Zaeh
System for product-based control of production processes. CIPLS (2013)
Jörg Franke, Tobias Maier, Franziska Schäfer, Michael F. Zaeh
Experimental Evaluation of the Thermal Machine Tool Behavior for Model Updating. Int. J. Autom. Technol. 6 (2) (2012)
Tobias Föckerer, Benjamin Kolkwitz, Carsten Heinzel, Michael F. Zaeh
Experimental and numerical analysis of transient behavior during grind-hardening of AISI 52100. Prod. Eng. 6 (6) (2012)
Alexander Bannat, Thibault Bautze, Michael Beetz, Jürgen Blume, Klaus Diepold, Christoph Ertelt, Florian Geiger, Thomas Gmeiner, Tobias Gyger, Alois C. Knoll, Christian Lau, Claus Lenz, Martin Ostgathe, Gunther Reinhart, Wolfgang Rösel, Thomas Rühr, Anna Schuboe, Kristina Shea, Ingo Stork, Sonja Stork, William Tekouo, Frank Wallhoff, Mathey Wiesbeck, Michael F. Zaeh
Artificial Cognition in Production Systems. IEEE Trans Autom. Sci. Eng. 8 (1) (2011)
Florian G. H. Behncke, Frank Gabriel, Stefan Langer, Clemens Hepperle, Udo Lindemann, Florian Karl, Johannes Pohl, Sebastian Schindler, Gunther Reinhart, Michael F. Zaeh
Analysis of information flows at interfaces between strategic product planning, product development and production planning to support process management - A literature based approach. SMC (2011)
Michael F. Zaeh, Jens Hatwig, Jan Musiol, Oliver Roesch, Gunther Reinhart
Analysis of the Accuracy of Industrial Robots and Laser Scanners for Remote Laser BeamWelding and Cutting. ISR/ROBOTIK (2010)
Michael F. Zaeh, Gunther Reinhart, Martin Ostgathe, Florian Geiger, Christian Lau
A holistic approach for the cognitive control of production systems. Adv. Eng. Informatics 24 (3) (2010)
Michael F. Zaeh, Georg Voellner
Three-dimensional friction stir welding using a high payload industrial robot. Prod. Eng. 4 (2-3) (2010)
Michael F. Zaeh, A. Erman Tekkaya, Dirk Biermann, Andreas Zabel, Mirko Langhorst, Alexander Schober, Thomas Kloppenborg, Markus Steiner, Eduard Ungemach
Integrated simulation of the process chain composite extrusion-milling-welding for lightweight frame structures. Prod. Eng. 3 (4-5) (2009)
Michael F. Zaeh, Mathey Wiesbeck, Sonja Stork, Anna Schubö
A multi-dimensional measure for determining the complexity of manual assembly operations. Prod. Eng. 3 (4-5) (2009)
Sonja Stork, Isabella Hild, Mathey Wiesbeck, Michael F. Zaeh, Anna Schubö
Finding Relevant Items: Attentional Guidance Improves Visual Selection Processes. USAB (2009)
Michael F. Zaeh, Markus Kahnert
The effect of scanning strategies on electron beam sintering. Prod. Eng. 3 (3) (2009)
Michael F. Zaeh, Tobias Hornfeck
Development of a robust laser beam bending process for aluminum fuselage structures. Prod. Eng. 2 (2) (2008)
Michael F. Zaeh, L. Papadakis, Mirko Langhorst
Simulation of the manufacturing process chain of welded frame structures. Prod. Eng. 2 (4) (2008)
Michael F. Zaeh, Clemens Poernbacher
Model-driven development of PLC software for machine tools. Prod. Eng. 2 (1) (2008)
Stella M. Clarke, Gerhard Schillhuber, Michael F. Zaeh, Heinz Ulbrich
Prediction-based methods for teleoperation across delayed networks. Multim. Syst. 13 (4) (2008)
Michael F. Zaeh, Sven Roeren
A new systematic classification of influences on thermal production processes for mechanical simulations. Prod. Eng. 1 (2) (2007)
Michael F. Zaeh, Martin Prasch
Systematic workplace and assembly redesign for aging workforces. Prod. Eng. 1 (1) (2007)
Michael F. Zaeh, Florian Graetz
Generation of circuit and fluid diagrams for mechatronic systems. Prod. Eng. 1 (2) (2007)
Stella M. Clarke, Gerhard Schillhuber, Michael F. Zaeh, Heinz Ulbrich
The Effects of Simulated Inertia and Force Prediction on Delayed Telepresence. Presence Teleoperators Virtual Environ. 16 (5) (2007)
Michael F. Zaeh, Stella M. Clarke, Peter Hinterseer, Eckehard G. Steinbach
Telepresence Across Networks: A Combined Deadband and Prediction Approach. IV (2006)
Bernd Petzold, Michael F. Zaeh, Berthold Färber, Barbara Deml, Hans Egermeier, Johannes Schilp, Stella M. Clarke
A Study on Visual, Auditory and Haptic Feedback for Assembly Tasks. Presence Teleoperators Virtual Environ. 13 (1) (2004)
Alexander Kron, Günther Schmidt, Bernd Petzold, Michael F. Zaeh, Peter Hinterseer, Eckehard G. Steinbach
Disposal of Explosive Ordnances by Use of a Bimanual Haptic Telepresence System. ICRA (2004)
Michael F. Zaeh, Wolfgang Wagner
Factory Planning Modules for Knowledge Sharing among Different Locations. APMS (2003)
Michael F. Zaeh, Wolfgang Wagner
Planning Mini-Factory Structures for the Close-to-Market Manufacture of Individualized Products. MCPC (2003)
Michael F. Zaeh, Henning Rudolf
Computer Aided Process Planning as an Enabler for Mass Customization: State of the Art and Future Areas for Research. MCPC (2003)
Stella M. Clarke, Michael F. Zaeh, J. H. Griebsch
Predicting Haptic Data with Support Vector Regression for Telepresence Applications. HIS (2003)
Michael F. Zaeh, Christopher Ulrich
Adapted Joining Processes for Mass Customization. MCPC (2003)