A. Erman Tekkaya

Publication Activity (10 Years)

Years Active: 1999-2020
Publications (10 Years): 19

Top Topics

Numerical Analysis

Surface Roughness

Engineering Students

Remote Laboratories

Top Venues

Publications

Siddharth Upadhya, Joshua Grodotzki, Alessandro Selvaggio, Oleksandr Mogylenko, A. Erman Tekkaya
Remote Lab to Illustrate the Influence of Process Parameters on Product Properties in Additive Manufacturing. REV (2020)
Oleksandr Mogylenko, Alessandro Selvaggio, Siddharth Upadhya, Joshua Grodotzki, A. Erman Tekkaya
Augmented Reality Application for the Mobile Measurement of Strain Distributions. REV (2020)
Voitech Stankevic, Joern Lueg-Althoff, Marlon Hahn, A. Erman Tekkaya, Nerija Zurauskiene, Justas Dilys, Jonas Klimantavicius, Skirmantas Kersulis, Ceslovas Simkevicius, Saulius Balevicius
Magnetic Field Measurements during Magnetic Pulse Welding Using CMR-B-Scalar Sensors. Sensors 20 (20) (2020)
Siddharth Upadhya, Alessandro Selvaggio, Tobias R. Ortelt, Joshua Grodotzki, A. Erman Tekkaya
Development of a Remote Tube Bending Lab to Illustrate Springback and Determine Process Limits. REV (2019)
Alessandro Selvaggio, Siddharth Upadhya, Joshua Grodotzki, A. Erman Tekkaya
Development of a Remote Compression Test Lab for Engineering Education. REV (2019)
Nina Schiffeler, Joshua Grodotzki, Tobias R. Ortelt, Valerie Stehling, Ingrid Isenhardt, A. Erman Tekkaya
Virtual und Augmented Reality in der MINT-Lehre. DeLFI (2018)
Joshua Grodotzki, Tobias R. Ortelt, A. Erman Tekkaya
Development of a FEM-lab for the virtual experimentation in forming processes. exp.at (2017)
Daniel Kruse, Robert Kuska, Sulamith Frerich, Dominik May, Tobias R. Ortelt, A. Erman Tekkaya
More Than "Did You Read the Script?". REV (2017)
Joshua Grodotzki, Alessandro Selvaggio, Tobias R. Ortelt, A. Erman Tekkaya
Demonstration of deep drawing experiments in a remote lab environment. exp.at (2017)
Peter Sieczkarek, Sebastian Wernicke, Soren Gies, A. Erman Tekkaya, Eugen Krebs, Petra Wiederkehr, Dirk Biermann, Wolfgang Tillmann, Dominic Stangier
Improvement strategies for the formfilling in incremental gear forming processes. Prod. Eng. 11 (6) (2017)
Tobias R. Ortelt, Sabine Pekasch, Karsten Lensing, Pierre-Jean Gueno, Dominik May, A. Erman Tekkaya
Concepts of the international manufacturing remote lab (MINTReLab): Combination of a MOOC and a remote lab for a manufacturing technology online course. EDUCON (2016)
Rickmer Meya, Tobias R. Ortelt, Alessandro Selvaggio, Sami Chatti, Christoph Becker, A. Erman Tekkaya
Development of a tele-operative control for the incremental tube forming process and its integration into a learning environment. EDUCON (2016)
Kerim Isik, Gregory Gerstein, Thomas Schneider, Robert Schulte, Daniel Rosenbusch, Till Clausmeyer, Florian Nürnberger, Milan Vucetic, Sergej Koch, Sven Hübner, Bernd-Arno Behrens, A. Erman Tekkaya, Marion Merklein
Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming. Prod. Eng. 10 (1) (2016)
Dominik May, Karsten Lensing, A. Erman Tekkaya
Internationalization as a topic in higher engineering education: A quantitative content analysis examining the engineering curricula from ten German technical universities. EDUCON (2016)
Tobias R. Ortelt, Soren Gies, Heinrich Traphoner, Sami Chatti, A. Erman Tekkaya
Integration of new concepts and features into forming technology lectures. EDUCON (2016)
Daniel Kruse, Sulamith Frerich, Marcus Petermann, Tobias R. Ortelt, A. Erman Tekkaya
Remote labs in ELLI: Lab experience for every student with two different approaches. EDUCON (2016)
Petra Kersting, Daniel Gröbel, Marion Merklein, Peter Sieczkarek, Sebastian Wernicke, A. Erman Tekkaya, Eugen Krebs, Dennis Freiburg, Dirk Biermann, Tim Weikert, Stephan Tremmel, Dominic Stangier, Wolfgang Tillmann, Steffen Matthias, Eduard Reithmeier, Maria Löffler, Florian Beyer, Kai Willner
Experimental and numerical analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming. Prod. Eng. 10 (1) (2016)
Dominik May, A. Erman Tekkaya
Transnational Connected Learning and Experimentation - Using live online classes and remote labs for preparing international engineering students for an international working world. Int. J. Eng. Pedagog. 6 (1) (2016)
Daniel Gröbel, Robert Schulte, Philipp Hildenbrand, Michael Lechner, Ulf Engel, Peter Sieczkarek, Sebastian Wernicke, Soren Gies, A. Erman Tekkaya, Bernd-Arno Behrens, Sven Hübner, Milan Vucetic, Sergej Koch, Marion Merklein
Manufacturing of functional elements by sheet-bulk metal forming processes. Prod. Eng. 10 (1) (2016)
Dominik May, Karsten Lensing, A. Erman Tekkaya, Michael Grosch, Ute Berbuir, Marcus Petermann
What students use: Results of a survey on media use among engineering students. FIE (2014)
Christian Pleul, Matthias Hermes, Sami Chatti, A. Erman Tekkaya
miniLABs drop in and become fascinated by engineering experiments. EDUCON (2013)
Christian Pleul, Abdelhakim Sadiki, Matthias Hermes, Sami Chatti, A. Erman Tekkaya
miniLABs - Focused Lab Sessions in Manufacturing Technology Related to Forming Processes. Int. J. Eng. Pedagog. 3 (S3) (2013)
A. Erman Tekkaya, Matthias Kleiner, Dirk Biermann, Lars Hiegemann, Sascha Rausch, V. Franzen, Lukas Kwiatkowski, Petra Kersting
Friction analysis of thermally sprayed coatings finished by ball burnishing and grinding. Prod. Eng. 7 (6) (2013)
C. Becker, G. Quintana, Matthias Hermes, B. Cavallini, A. Erman Tekkaya
Prediction of surface roughness due to spinning in the incremental tube forming process. Prod. Eng. 7 (2-3) (2013)
A. Erman Tekkaya, Muhammad Masood Hussain, Jörg Witulski
The non-hydrostatic response of polymer melts as a pressure medium in sheet metal forming. Prod. Eng. 6 (4-5) (2012)
Marco Gösling, Hilke Kracker, Alexander Brosius, Sonja Kuhnt, A. Erman Tekkaya
Strategies for springback compensation regarding process robustness. Prod. Eng. 5 (1) (2011)
Claudius Terkowsky, Christian Pleul, Isa Jahnke, A. Erman Tekkaya
Tele-Operated Laboratories for Online Production Engineering Education - Platform for E-Learning and Telemetric Experimentation (PeTEX). Int. J. Online Eng. 7 (S1) (2011)
Isa Jahnke, Claudius Terkowsky, Christian Pleul, A. Erman Tekkaya
Online Learning with Remote-Configured Experiments. DeLFI (2010)
O. Koray Demir, Verena Psyk, A. Erman Tekkaya
Simulation of tube wrinkling in electromagnetic compression. Prod. Eng. 4 (4) (2010)
Lukas Kwiatkowski, Miroslav Urban, Gerd Sebastiani, A. Erman Tekkaya
Tooling concepts to speed up incremental sheet forming. Prod. Eng. 4 (1) (2010)
H.-D. Pham, Michael Trompeter, A. Erman Tekkaya
Erratum to: On the reduction of gloss property of organic coated sheet metals after forming. Prod. Eng. 4 (5) (2010)
Markus Schneider, Gregor Koehler, Dirk Becker, Alessandro Selvaggio, A. Erman Tekkaya, Christian Munzinger, Volker Schulze, Matthias Kleiner
Towards the flexible and near-net-shape production of three-dimensionally curved extrusion profiles. Prod. Eng. 4 (6) (2010)
Claudius Terkowsky, Isa Jahnke, Christian Pleul, N. Burkhardt, Roberto Licari, Per Johannssen, Gianluca Buffa, Matthias Heiner, Livan Fratini, Ernesto LoValvo, Mihai Nicolescu, Johannes Wildt, A. Erman Tekkaya
Developing Tele-Operated Laboratories for Manufacturing Engineering Education. Platform for E-Learning and Telemetric Experimentation (PeTEX). Int. J. Online Eng. 6 (S1) (2010)
Matthias Kleiner, A. Erman Tekkaya, Sami Chatti, Matthias Hermes, A. Weinrich, Noomane Ben Khalifa, Uwe Dirksen
New incremental methods for springback compensation by stress superposition. Prod. Eng. 3 (2) (2009)
Matthias Kleiner, A. Erman Tekkaya, Dirk Becker, D. Pietzka, Marco Schikorra
Combination of curved profile extrusion and composite extrusion for increased lightweight properties. Prod. Eng. 3 (1) (2009)
Michael F. Zaeh, A. Erman Tekkaya, Dirk Biermann, Andreas Zabel, Mirko Langhorst, Alexander Schober, Thomas Kloppenborg, Markus Steiner, Eduard Ungemach
Integrated simulation of the process chain composite extrusion-milling-welding for lightweight frame structures. Prod. Eng. 3 (4-5) (2009)
Alessandro Selvaggio, Uwe Dirksen, A. Erman Tekkaya, Marco Schikorra, Matthias Kleiner
Increasing the Production Accuracy of Profile Bending with Methods of Computational Intelligence. Evol. Comput. 17 (4) (2009)
Matthias Kleiner, A. Erman Tekkaya, O. Koray Demir, D. Risch, Verena Psyk
A drop-weight high-speed tensile testing instrument. Prod. Eng. 3 (2) (2009)
Michael F. Zäh, A. Erman Tekkaya, Mirko Langhorst, M. Ruhstorfer, Alexander Schober, D. Pietzka
Experimental and numerical investigation of the process chain from composite extrusion to friction stir welding regarding the residual stresses in composite extruded profiles. Prod. Eng. 3 (4-5) (2009)
Matthias Kleiner, Manfred Curbach, A. Erman Tekkaya, Robert Ritter, Kerstin Speck, Michael Trompeter
Development of ultra high performance concrete dies for sheet metal hydroforming. Prod. Eng. 2 (2) (2008)
A. Erman Tekkaya, Ravi Shankar, Gerd Sebastiani, Werner Homberg, Matthias Kleiner
Surface reconstruction for incremental forming. Prod. Eng. 1 (1) (2007)
A. Erman Tekkaya, Hossein Karbasian, Werner Homberg, Matthias Kleiner
Thermo-mechanical coupled simulation of hot stamping components for process design. Prod. Eng. 1 (1) (2007)
Aydan M. Erkmen, Ismet Erkmen, A. Erman Tekkaya
Optimal initialization of manipulation dynamics by vorticity model of robot hand preshaping. Part I: Vorticity model. J. Field Robotics 17 (4) (2000)
Aydan M. Erkmen, Ismet Erkmen, A. Erman Tekkaya
Optimal initialization of manipulation dynamics by vorticity model of robot hand preshaping. Part II: Analyses of grasp initialization and its vorticity based optimization. J. Field Robotics 17 (4) (2000)
Ismet Erkmen, Aydan M. Erkmen, A. Erman Tekkaya, T. Pasinlioglu
Haptic perception of shape and hollowness of deformable objects using the anthrobot-III robot hand. J. Field Robotics 16 (1) (1999)