Enrico S. Canuto

Publication Activity (10 Years)

Years Active: 1986-2021
Publications (10 Years): 4

Top Topics

Orbit Determination

Experimental Data

Electro Hydraulic

Population Dynamics

Top Venues

Int. J. Mechatronics Autom.

Eur. J. Control

Publications

Enrico S. Canuto, Daniele Mazza
Introduction to population dynamics and resource exploitation. CoRR (2021)
Mauricio A. Lotufo, Carlos Perez-Montegro, Luigi Colangelo, Enrico S. Canuto, Carlo Novara
Identification and control of a quadrotor from experimental data. MED (2016)
Congzhi Huang, Enrico S. Canuto, Carlo Novara
The four-tank benchmark: A simple solution by Embedded Model Control. ACC (2016)
Carlos Perez-Montenegro, Carlo Novara, Enrico S. Canuto, Diomar Calderon, Adolfo Vargas
Feasibility analysis of sustainable methods through manufacturing algebra and Monte-Carlo simulations. MED (2016)
Mauricio Alejandro Lotufo, Luigi Colangelo, Carlos Perez-Montenegro, Enrico S. Canuto
The feedback linearisation method for Embedded Model Control: The Borea project case-study. MED (2015)
Enrico S. Canuto, Luigi Colangelo, Mauricio Lotufo, Sabrina Dionisio
Satellite-to-satellite attitude control of a long-distance spacecraft formation for the Next Generation Gravity Mission. Eur. J. Control 25 (2015)
Enrico S. Canuto
On dynamic uncertainty estimators. ACC (2015)
Carlos Perez-Montenegro, Mauricio Lotufo, Enrico S. Canuto, Luigi Colangelo
Saturation managing for the propulsion system and optimal dispatching proposal for multi-rotor UAV. AIM (2014)
Enrico S. Canuto, Luigi Colangelo
Angular drag-free control and fine satellite-to-satellite pointing for the Next Generation Gravity Missions. ECC (2014)
Enrico S. Canuto, Wilber Acuña-Bravo, Marco Agostani, Marco Bonadei
Proportional electro-hydraulic valves: from analogue to digital control. Int. J. Mechatronics Autom. 4 (2) (2014)
Enrico S. Canuto
Orbit and attitude control for gravimetry drag-free satellites: When disturbance rejection becomes mandatory. ACC (2013)
Enrico S. Canuto, Wilber Acuña-Bravo, Carlos Perez-Montenegro
Robust control stability using the error loop. Int. J. Mechatronics Autom. 3 (2) (2013)
Enrico S. Canuto, Wilber Acuña-Bravo, Andrés Molano-Jimenez, José Ospina, Carlos Perez-Montenegro
Embedded Model Control approach to robust control CoRR (2011)
Enrico S. Canuto, Andrés Molano-Jimenez, Luca Massotti
Drag-Free Control of the GOCE Satellite: Noise and Observer Design. IEEE Trans. Control. Syst. Technol. 18 (2) (2010)
José Ospina, Enrico S. Canuto, Andrés Molano-Jimenez, Wilber Acuña-Bravo
Multilayer Control of an Optical Reference Cavity for Space Applications. IEEE Trans. Ind. Electron. 57 (7) (2010)
José Ospina, Enrico S. Canuto
Uncertainty reduction on temperature differential measurements using the calibration by comparison method. ACC (2009)
Wilber Acuña-Bravo, Enrico S. Canuto, Stefano Malan, Davide Colombo, Marco Forestello, Riccardo Morselli
Fine and simplified dynamic modelling of complex hydraulic systems. ACC (2009)
Wilber Acuña-Bravo, Enrico S. Canuto, Stefano Malan
Power Saving in Mobile Hydraulic Systems via Embedded Model Control. ETFA (2009)
José Ospina, Enrico S. Canuto, Wilber Acuña-Bravo
Avoiding Saturation-to-zero of Heaters in Temperature Regulators. ETFA (2009)
Enrico S. Canuto
Drag-free and attitude control for the GOCE satellite. Autom. 44 (7) (2008)
Enrico S. Canuto, Fabio Musso, José Ospina
Embedded Model Control: Submicroradian Horizontality of the Nanobalance Thrust-Stand. IEEE Trans. Ind. Electron. 55 (9) (2008)
Enrico S. Canuto, José Ospina, Aangelo Ripa, Fabio Musso, Franco Alasia
Multilayer control of an optical reference cavity for space applications. ETFA (2007)
Enrico S. Canuto, Fabio Musso, Luca Massotti
Embedded model control: sub-microradian horizontality of the nanobalance thrust-stand. ETFA (2007)
Enrico S. Canuto, Luis David Prieto
Embedded model control: principles and applications. part II. ETFA (2007)
Luca Massotti, Enrico S. Canuto
Emerging technologies in the ESA science and earth observation programme. ETFA (2007)
Enrico S. Canuto, Luis David Prieto
Embedded model control: principles and applications. part I. ETFA (2007)
Enrico S. Canuto, Fabio Musso
Digital Control of Interferometric Metrology Lines. Eur. J. Control 13 (4) (2007)
Enrico S. Canuto, Fabio Musso, Luca Massotti
Automation and Control of Fabry-Pérot Interferometers. IEEE Trans. Ind. Electron. 54 (2) (2007)
Enrico S. Canuto, Fabio Musso
Embedded Model Control: Application to Interferometric Metrology Lines. ETFA (2006)
Enrico S. Canuto, Tommaso D'Anna
Embedded Model Control and dynamic simulation. ETFA (2006)
Enrico S. Canuto, Fabio Musso
Embedded Model Control: Application to Web Winding. Part I: Modelling. ETFA (2006)
Enrico S. Canuto, Fabio Musso
Embedded Model Control: Application to Web Winding. Part II: Digital Control. ETFA (2006)
Enrico S. Canuto, Fabio Musso
Digital control of interferometric metrology lines. ACC (2006)
Enrico S. Canuto, Fabio Musso, Luca Massotti
Automation and control of Fabry-Perot interferometers. ETFA (2005)
Davide Andreis, Enrico S. Canuto
Drag-Free and Attitude Control for the GOCE satellite. CDC/ECC (2005)
Enrico S. Canuto, Fabio Musso, Luca Massotti
Embedded Model Control: Application to Electrovalves. ISIC (2005)
Enrico S. Canuto, Fabio Musso, Luca Massotti
Digital control of Fabry-P é rot interferometers. CDC/ECC (2005)
Davide Andreis, Enrico S. Canuto
Orbit dynamics and kinematics with full quaternions. ACC (2004)
Enrico S. Canuto, Andrea Rolino
Active vibration suppression in a suspended Fabry-Perot cavity. ACC (2004)
Enrico S. Canuto, Fabio Musso
Distributed metrology and active control for according stabilization of space telescopes. ISIC (2004)
Enrico S. Canuto, Andrea Rolino
Multi-input digital frequency stabilization of monolithic lasers. Autom. 40 (12) (2004)
Enrico S. Canuto, Fabio Musso
Study of the sub-millikelvin thermal control of a frequency reference cavity. ETFA (1) (2003)
Enrico S. Canuto, Andrea Rolino
Digital control of an interferometric balance for micro-thrust measurement. ACC (2003)
Enrico S. Canuto, Basilio Bona, Giuseppe Carlo Calafiore, Marina Indri
Drag free control for the European satellite GOCE. Part II: digital control. CDC (2002)
Enrico S. Canuto, Basilio Bona, Giuseppe Carlo Calafiore, Marina Indri
Drag free control for the European satellite GOCE. Part I: modelling. CDC (2002)
Enrico S. Canuto, Andrea Rolino
Digital control of an interferometric balance for micro-thrusters qualification. ACC (2002)
Enrico S. Canuto
Nanoradian digital stabilization of a suspended table for scientific experiments. ACC (2002)
Enrico S. Canuto, Sergio Tonani, Rudolf Albrecht
Manufacturing algebra: review and advancements. ETFA (1) (2001)
Enrico S. Canuto, Andrea Rolino
Digital control of an interferometric balance for micro-thrusters qualification. ETFA (2) (2001)
Enrico S. Canuto, Sergio Tonani
Nanoradian digital stabilization of a suspended table for scientific experiments. ETFA (2) (2001)
Enrico S. Canuto, Fabrizio Bertinetto
Multi-input digital frequency stabilization of metrology lasers. ACC (2001)
Enrico S. Canuto, Sergio Tonani
Algebra and Dynamics of Manufacturing-like Processes. ICRA (2001)
Enrico S. Canuto
Active distance stabilization of large bodies using Fabry-Perot interferometry. CDC (2000)
Enrico S. Canuto
Manufacturing Algebra. Intell. Autom. Soft Comput. 2 (4) (1996)
Alfred Iwainsky, Enrico S. Canuto, Oleg G. Taraszow, Agostino Villa
Network decomposition for the optimization of connection structures. Networks 16 (2) (1986)