Berend Denkena

Publication Activity (10 Years)

Years Active: 2002-2022
Publications (10 Years): 31

Top Topics

Process Planning

Manufacturing Industry

Systems Engineering

Top Venues

Int. J. Autom. Technol.

Int. J. Manuf. Res.

Publications

Berend Denkena, Heinrich Klemme, S. Kaiser, M. Shanib
Intelligent Manufacturing Cell for Implants. IEEM (2022)
Rico Ottermann, Shuowen Zhang, Berend Denkena, Heinrich Klemme, Dennis Kowalke, Michael Korbacher, Folke Dencker, Marc Christopher Wurz
In Situ Resistance Trimming of Directly Deposited Thin-Film Strain Gauges. IEEE SENSORS (2022)
Berend Denkena, Heinrich Klemme, Dennis Stoppel
Machine Learning Based Reconstruction of Process Forces. SYSINT (2022)
Carolin Kellenbrink, Nicolas Nübel, André Schnabel, Philipp Gilge, Joerg R. Seume, Berend Denkena, Stefan Helber
A regeneration process chain with an integrated decision support system for individual regeneration processes based on a virtual twin. Int. J. Prod. Res. 60 (13) (2022)
Berend Denkena, Bernd Breidenstein, Thilo Grove, Vannila Prasanthan, Ludger Overmeyer, S. Nothdurft, Stefan Kaierle, Jörg Wallaschek, Jens Twiefel, H. Ohrdes, Hans Jürgen Maier, Thomas Hassel, Maximilian Mildebrath
Surface integrity of turned laser-welded hybrid shafts. Prod. Eng. 13 (1) (2019)
Berend Denkena, Benjamin Bergmann, Matthias Witt
Material identification based on machine-learning algorithms for hybrid workpieces during cylindrical operations. J. Intell. Manuf. 30 (6) (2019)
Berend Denkena, Benjamin Bergmann, Bernd Breidenstein, Vannila Prasanthan, Matthias Witt
Analysis of potentials to improve the machining of hybrid workpieces. Prod. Eng. 13 (1) (2019)
Frederico C. Magalhães, Carlos E. H. Ventura, Alexandre M. Abrão, Berend Denkena, Bernd Breidenstein, Kolja Meyer
Prediction of surface residual stress and hardness induced by ball burnishing through neural networks. Int. J. Manuf. Res. 14 (3) (2019)
Berend Denkena, Marc-André Dittrich, Yanwei Liu
A new process chain for recycling of cemented carbide milling tools. Prod. Eng. 12 (3-4) (2018)
Lukas Groß, Alexander Herwig, David C. Berg, Carsten Schmidt, Berend Denkena, Peter Horst, Dieter Meiners
Production-based design of a hybrid load introduction element for thin-walled CFRP Structures. Prod. Eng. 12 (2) (2018)
Berend Denkena, Benjamin Bergmann, Christian Teige
Frictionally damped tool holder for long projection cutting tools. Prod. Eng. 12 (6) (2018)
Jan Königsberg, Jan Reiners, Bernd Ponick, Berend Denkena, Benjamin Bergmann
Highly Dynamic Spindle Integrated Magnet Actuators for Chatter Reduction. Int. J. Autom. Technol. 12 (5) (2018)
Berend Denkena, Marc-André Dittrich, B.-H. Rahner
Smart and energy-efficient dust suction concept for milling of fibre-reinforced plastics. Prod. Eng. 11 (6) (2017)
Berend Denkena, Lars Hülsemeyer, Maik Bergmeier
Performance of a piezo-hydraulic fine positioning device: Experimental analyses with a scaled model. Prod. Eng. 11 (4-5) (2017)
Berend Denkena, Thilo Grove, O. Maiss, V. Suntharakumaran
New tool concept for grinding a plateau-like surface for tribological applications. Prod. Eng. 11 (4-5) (2017)
Berend Denkena, L. Gottwik, Thilo Grove, A. Wippermann
Temperature and energy partition for grinding of mixed oxide ceramics. Prod. Eng. 11 (4-5) (2017)
Berend Denkena, Jan Brüning, Lars Windels, Dirk Euhus, Stefan Kirsch, Daniel Overbeck, Thomas Lepper
Holistic process planning chain for robot machining. Prod. Eng. 11 (6) (2017)
O. Maiss, Thilo Grove, Berend Denkena
Influence of asymmetric cutting edge roundings on surface topography. Prod. Eng. 11 (4-5) (2017)
Berend Denkena, Marc-André Dittrich, Florian Winter, Christian Wagener
Simulation-based planning and evaluation of personnel scheduling in knowledge-intensive production systems. Prod. Eng. 10 (4-5) (2016)
Maria Löffler, Kolja Andreas, Ulf Engel, Robert Schulte, Daniel Gröbel, Eugen Krebs, Dennis Freiburg, Dirk Biermann, Dominic Stangier, Wolfgang Tillmann, Tim Weikert, Sandro Wartzack, Stephan Tremmel, Henning Lucas, Berend Denkena, Marion Merklein
Tribological measures for controlling material flow in sheet-bulk metal forming. Prod. Eng. 10 (4-5) (2016)
Volker Böß, Berend Denkena, Volker Wesling, Stefan Kaierle, Felix Rust, Dennis Nespor, Boris Rottwinkel
Repairing parts from nickel base material alloy by laser cladding and ball end milling. Prod. Eng. 10 (4-5) (2016)
Wolfgang Tillmann, Dominic Stangier, Berend Denkena, Thilo Grove, Henning Lucas
Influence of PVD-coating technology and pretreatments on residual stresses for sheet-bulk metal forming tools. Prod. Eng. 10 (1) (2016)
Bernd Breidenstein, Berend Denkena, J. Vetter, Björn Richter
Influence of the residual stress state of coatings on the wear behavior in external turning of AISI 4140 and Ti-6Al-4V. Prod. Eng. 10 (2) (2016)
Berend Denkena, J. Friederichs, Jonathan Fuchs
Design and analysis of a 2-DOF synchronous planar drive for machine tools. Prod. Eng. 9 (1) (2015)
Berend Denkena, K. M. Litwinski, Martin Eckl
Modeling and compensation of the interactions between geometrical errors and drive currents in directly driven gantry machine tools. Prod. Eng. 9 (2) (2015)
Berend Denkena, D. Preising, Stephan Woiwode
Gear profile grinding with metal bonded CBN tools. Prod. Eng. 9 (1) (2015)
Berend Denkena, Martin Eckl, Thomas Lepper
Advanced Control Strategies for Active Vibration Suppression in Laser Cutting Machines. Int. J. Autom. Technol. 9 (4) (2015)
Berend Denkena, Thilo Grove, L. Behrens
Significant influence factors on the grinding tool wear and cutting mechanisms during grinding of PCBN inserts. Prod. Eng. 9 (2) (2015)
Berend Denkena, Thilo Grove, Marc-André Dittrich
Flow stress and temperature considerations for orthogonal cutting of an aluminum-alloyed UHC-steel. Prod. Eng. 9 (3) (2015)
Berend Denkena, Jens Köhler, Andreas Schindler, Stephan Woiwode
Kinematic analysis of the cutting speed for continuous generating grinding. Prod. Eng. 9 (1) (2015)
Berend Denkena, Thilo Grove, O. Maiss
Influence of the cutting edge radius on surface integrity in hard turning of roller bearing inner rings. Prod. Eng. 9 (3) (2015)
Berend Denkena, Jens Köhler, Marc-André Dittrich
Chip formation and tool wear in turning of aluminum-alloyed UHC-steels. Prod. Eng. 8 (4) (2014)
Berend Denkena, Jens Köhler, Stephan Woiwode
Dressing of vitrified bonded CBN tools for continuous generating grinding. Prod. Eng. 8 (5) (2014)
Berend Denkena, Wladimir Bickel, R. Grabowski
Modeling and simulation of milling processes including process damping effects. Prod. Eng. 8 (4) (2014)
A. Nemeti, Berend Denkena
Time-oriented pricing for the tool and mould manufacturing industry. Prod. Eng. 8 (1-2) (2014)
Berend Denkena, Barbara Dengler, Karl Doreth, Claudia Krull, Graham Horton
Interpretation and optimization of material flow via system behavior reconstruction. Prod. Eng. 8 (5) (2014)
Bernd-Arno Behrens, Berend Denkena, Hong-Seok Park, Jan Henjes, Stefan Kröning, Timur Yilkiran, Andreas Klassen
Application of methods for ecological optimization of crank shaft forging process. Prod. Eng. 8 (3) (2014)
Alexandre M. Abrão, Berend Denkena, Bernd Breidenstein, Tobias Mörke
Surface and subsurface alterations induced by deep rolling of hardened AISI 1060 steel. Prod. Eng. 8 (5) (2014)
Berend Denkena, Jens Köhler, Andreas Schindler
Behavior of the magnetic abrasive tool for cutting edge preparation of cemented carbide end mills. Prod. Eng. 8 (5) (2014)
Berend Denkena, Hendrik Stiffel, Eike Hasselberg, Dennis Nespor
Chip formation and modeling of dynamic force behavior in machining polycrystalline iron-aluminum. Prod. Eng. 8 (3) (2014)
Berend Denkena, K. M. Litwinski, D. Brouwer, H. Boujnah
Design and analysis of a prototypical sensory Z-slide for machine tools. Prod. Eng. 7 (1) (2013)
Berend Denkena, Jörn Ostermann, Jens Köhler, Tobias Mörke, Benjamin Spitschan
Product Identification by Machined Micro Patterns. Int. J. Autom. Technol. 7 (6) (2013)
Berend Denkena, Jürgen Gausemeier, Bernd Scholz-Reiter
Special issue WGP: "System-integrated intelligence: new challenges for product and production engineering". Prod. Eng. 7 (1) (2013)
Berend Denkena, F. Charlin, M. Merwart
Competence-based process planning for the workshop production. Prod. Eng. 7 (2-3) (2013)
Berend Denkena, Haydar Kayapinar
XY-table for desktop machine tools based on a new fluidic planar drive. Prod. Eng. 7 (5) (2013)
Berend Denkena, Felix Flöter
Adaptive Cutting Force Control with a Hybrid Axis System. Int. J. Autom. Technol. 7 (4) (2013)
Christian Bartelt, Volker Böß, Jan Brüning, Andreas Rausch, Berend Denkena, Jean Paul Tatou
A Software Architecture to Synchronize Interactivity of Concurrent Simulations in Systems Engineering. ISPE CE (2013)
Berend Denkena, Olaf Gümmer
Process stabilization with an adaptronic spindle system. Prod. Eng. 6 (4-5) (2012)
Berend Denkena, Jens Köhler, Jan Kästner
Chip formation in grinding: an experimental study. Prod. Eng. 6 (2) (2012)
Berend Denkena, Bernd-Arno Behrens, F. Charlin, Matthias Dannenberg
Integrative process chain optimization using a Genetic Algorithm. Prod. Eng. 6 (1) (2012)
Berend Denkena, Wladimir Bickel, Volker Sellmeier
Flank milling of compliant workpieces with chamfered tools. Prod. Eng. 6 (4-5) (2012)
Sabrina Pluemer, Kathrin Voges-Schwieger, Berend Denkena, Bernd-Arno Behrens
Development of an advanced micro-positioning system for increasing operation accuracy: consideration of high pressure sealing. Prod. Eng. 6 (2) (2012)
Volker Böß, Jan Brüning, Berend Denkena
Standardized Communication in Simulation of Interacting Machine Tool Components. ISPE CE (2012)
Berend Denkena, Helge Henning
Multicriteria dimensioning of hard-finishing operations regarding cross-process interdependencies. J. Intell. Manuf. 23 (6) (2012)
Berend Denkena, Jens Köhler, Mesfin Sisay Mengesha
Influence of the cutting edge rounding on the chip formation process: Part 1. Investigation of material flow, process forces, and cutting temperature. Prod. Eng. 6 (4-5) (2012)
Berend Denkena, Leif-Erik Lorenzen, Justin Schmidt
Adaptive process planning. Prod. Eng. 6 (1) (2012)
Berend Denkena, Peter Bluemel, Stefan Kroening, Jens Roebbing
Condition based maintenance planning of highly productive machine tools. Prod. Eng. 6 (3) (2012)
Berend Denkena, Jan Thomas Schürmeyer, Mark Eikötter
Linking total costs and benefits of ownership (TCBO) and process chain simulation for integrated assessment of manufacturing technologies and processes. Prod. Eng. 5 (5) (2011)
Lars Hvam, Martin Bonev, Berend Denkena, Jan Thomas Schürmeyer, Barbara Dengler
Optimizing the order processing of customized products using product configuration. Prod. Eng. 5 (6) (2011)
Berend Denkena, Jens Köhler, Roland Meyer, Hendrik Stiffel
Modification of the Tool-Workpiece Contact Conditions to Influence the Tool Wear and Workpiece Loading During Hard Turning. Int. J. Autom. Technol. 5 (3) (2011)
Berend Denkena, Jens Köhler, Volker Sellmeier, Tobias Mörke
Topography prediction of resilient parts after flank milling with chamfered tools. Prod. Eng. 5 (3) (2011)
Berend Denkena, Hans-Christian Möhring, K. M. Litwinski, Dennis Heinisch
Automated design of fixtures based on FEM simulations. Int. J. Comput. Aided Eng. Technol. 3 (3/4) (2011)
Christian Brecher, Berend Denkena, Knut Großmann, Paul Steinmann, Aous Bouabid, Dennis Heinisch, R. Hermes, Michael Löser
Identification of weak spots in the metrological investigation of dynamic machine behaviour. Prod. Eng. 5 (6) (2011)
Berend Denkena, Wladimir Bickel, Bernd Ponick, Judith Emmrich
Dynamic analysis of a motor-integrated method for a higher milling stability. Prod. Eng. 5 (6) (2011)
Berend Denkena, Jan Thomas Schürmeyer, Volker Böß, Rabih Kaddour
CAD-based cost calculation of mould cavities. Prod. Eng. 5 (1) (2011)
Berend Denkena, Helge Henning, Leif-Erik Lorenzen
Genetics and intelligence: new approaches in production engineering. Prod. Eng. 4 (1) (2010)
Berend Denkena, Luis de Leon, Jens Köhler
Influence of scaled undeformed sections of cut on strain rate, cutting force and temperature. Prod. Eng. 4 (5) (2010)
Jan C. Aurich, Dirk Biermann, Heribert Blum, Christian Brecher, Carsten Carstensen, Berend Denkena, Fritz Klocke, Matthias Kröger, Paul Steinmann, Klaus Weinert
Modelling and simulation of process: machine interaction in grinding. Prod. Eng. 3 (1) (2009)
Berend Denkena, Leif-Erik Lorenzen, Jan Thomas Schürmeyer
Rule-based quotation costing of pressure die casting moulds. Prod. Eng. 3 (1) (2009)
Berend Denkena, Helge Henning, Jan Henjes
Model-Based Dimensioning of Multistage Processes Regarding Multiple Criteria. DET (2009)
Berend Denkena, Luis de Leon, Bo Wang
Grinding of microstructured functional surfaces: a novel strategy for dressing of microprofiles. Prod. Eng. 3 (1) (2009)
Berend Denkena, Hans-Christian Möhring, K. M. Litwinski
Design of dynamic multi sensor systems. Prod. Eng. 2 (3) (2008)
Berend Denkena, David Boehnke, L. de León
Machining induced residual stress in structural aluminum parts. Prod. Eng. 2 (3) (2008)
Berend Denkena, David Boehnke, Benjamin Konopatzki, Josef-Christian Buhl, Sameh Rahman, Lars Robben
Sonic analysis in cut-off grinding of concrete. Prod. Eng. 2 (2) (2008)
Berend Denkena, David Boehnke, Roland Meyer
Reduction of wear induced surface zone effects during hard turning by means of new tool geometries. Prod. Eng. 2 (2) (2008)
Berend Denkena, S. Simon
Computer-aided analysis of flow-characteristics of a micro-positioning system. Prod. Eng. 2 (2) (2008)
Berend Denkena, David Boehnke, Jan Kästner
Microstructuring of functional surfaces by means of cutting processes. Prod. Eng. 2 (1) (2008)
Berend Denkena, David Boehnke, P. Dziewiecki
Tool behavior at alternating thermo-mechanical loads during milling of compounds out of aluminum and spheroidal cast iron. Prod. Eng. 2 (4) (2008)
Berend Denkena, Jörn Ostermann, Christian Becker, Christian Spille
Mechanical information storage by use of an excited turning tool. Prod. Eng. 1 (1) (2007)
Berend Denkena, Martin Reichstein, Dennis Hahmann
Dressing of filigree fine-grained metal bonded grinding wheels. Prod. Eng. 1 (3) (2007)
Berend Denkena, P. Hesse, J. Friederichs, Armin Wedler
Schlüsselkomponenten für Roboter in der Produktion Roboterhaut und Sicherheitskonzept für die Mensch-Roboter Kooperation. AMS (2007)
Berend Denkena, Carsten Schmidt
Experimental investigation and simulation of machining thin-walled workpieces. Prod. Eng. 1 (4) (2007)
Berend Denkena, Hans-Christian Möhring, K. M. Litwinski
Simulationsbasierte Multisensorsystemauslegung. AMS (2007)
Berend Denkena, Christian Holz, Houssem Abdellatif
Model-based control of a hexapod with linear direct drives. Int. J. Comput. Integr. Manuf. 19 (5) (2006)
Xiaoli Li, Ruxu Du, Berend Denkena, Joachim Imiela
Tool breakage monitoring using motor current signals for machine tools with linear motors. IEEE Trans. Ind. Electron. 52 (5) (2005)
Heinz Wörn, Björn Hein, Detlef Mages, Berend Denkena, Rene Apitz, Pawel Kowalski, Niels Reimer
Combining manual haptic path planning of industrial robots with automatic path smoothing. ICINCO (2005)
Berend Denkena, Stephan Scherger, Martin Lünemann
Mass Customized Shoe Lasts. MCPC (2003)
Berend Denkena, Michael Zwick, Peer-Oliver Woelk
Multiagent-Based Process Planning and Scheduling in Context of Supply Chains. HoloMAS (2003)
Berend Denkena, Hans Kurt Tönshoff, Michael Zwick, Peer-Oliver Woelk
Process Planning and Scheduling with Multiagent Systems. BASYS (2002)