Fritz Klocke

Publication Activity (10 Years)

Years Active: 1997-2018
Publications (10 Years): 11

Top Topics

Machining Processes

Mathematical Modeling

Top Venues

Simul. Model. Pract. Theory

Math. Comput. Simul.

Publications

Sebastian Prinz, Daniel Trauth, Patrick Mattfeld, Fritz Klocke
Influence of different grinding wheel and dressing roller specifications on grinding wheel wear. Prod. Eng. 12 (3-4) (2018)
Fritz Klocke, Benjamin Döbbeler, Thomas Lakner
Influence of the coolant nozzle orientation and size on the tool temperature under high-pressure coolant supply using an analogy test bench. Prod. Eng. 12 (3-4) (2018)
Michael Rom, Karl-Heinz Brakhage, Sebastian Barth, Christian Wrobel, Patrick Mattfeld, Fritz Klocke
Mathematical modeling of ceramic bond bridges in grinding wheels. Math. Comput. Simul. 147 (2018)
Muzaffer Ay, Sebastian Stemmler, Dirk Abel, Max Schwenzer, Fritz Klocke
System Identification of a CNC Machining Center with Support Vector Machines. MED (2018)
Christian Wirtz, Sebastian Mueller, Daniel Trauth, Patrick Mattfeld, Fritz Klocke
Influence of the cemented carbide specification on the process force and the process temperature in grinding. Prod. Eng. 11 (6) (2017)
Marvin Binder, Fritz Klocke, Benjamin Döbbeler
An advanced numerical approach on tool wear simulation for tool and process design in metal cutting. Simul. Model. Pract. Theory 70 (2017)
Max Schwenzer, Oliver Adams, Fritz Klocke, Sebastian Stemmler, Dirk Abel
Model-based predictive force control in milling: determination of reference trajectory. Prod. Eng. 11 (2) (2017)
Fritz Klocke
Editorial: Congratulatory Message. Int. J. Autom. Technol. 11 (3) (2017)
Fritz Klocke, Patrick Mattfeld, Jens Stauder, Johannes Müller, Timm Grünebaum
Robust technology chain design: considering undesired interactions within the technology chain. Prod. Eng. 11 (4-5) (2017)
Fritz Klocke, Olaf Dambon, Gang Liu, Julia Dukwen
Analysis of wear of fused silica moulding using glassy carbon moulds. Prod. Eng. 10 (4-5) (2016)
Daniel Trauth, J. Stanke, A. Shirobokov, Patrick Mattfeld, Fritz Klocke
Analysis of the fluid pressure, load capacity, and coefficient of friction of an elliptic machine hammer peened surface structure in hydrodynamic lubrication. Prod. Eng. 10 (6) (2016)
Fritz Klocke, Janis Thiermann, Patrick Mattfeld
Influence of the dressing process on grinding wheel wear. Prod. Eng. 9 (5-6) (2015)
Yuan Liu, Thomas Bobek, Fritz Klocke
Laser path calculation method on triangulated mesh for repair process on turbine parts. Comput. Aided Des. 66 (2015)
Fritz Klocke, Kristian Arntz, Dominik Heeschen
Integrative technology chain design for small scale manufacturers. Prod. Eng. 9 (1) (2015)
Fritz Klocke, Gunter Spöcker, Tobias Huwer, Thomas Bobek, Kristian Arntz
Reducing data loss within adaptive process chains in the context of commonly-used CAx systems. Prod. Eng. 9 (3) (2015)
Deniz Sari, Fritz Klocke, Christoph Löpenhaus
Gear finish hobbing: potentials of several cutting materials. Prod. Eng. 9 (3) (2015)
S. Buchkremer, Fritz Klocke, Dieter Lung
Finite-element-analysis of the relationship between chip geometry and stress triaxiality distribution in the chip breakage location of metal cutting operations. Simul. Model. Pract. Theory 55 (2015)
Fritz Klocke, Daniel Trauth, M. Terhorst, Patrick Mattfeld
Friction analysis of alternative tribosystems for a foil free forming of stainless steel using strip drawing test: analysis of physicochemical interactions between coatings and lubricants. Prod. Eng. 8 (5) (2014)
Fritz Klocke, Kristian Arntz, Dominik Heeschen
Decision-Making Process in Manufacturing Technology Planning for Small Scale Productions. HICSS (2014)
Fritz Klocke, Daniel Trauth, Fabian Schongen, A. Shirobokov
Analysis of friction between stainless steel sheets and machine hammer peened structured tool surfaces: experimental and numerical investigation of the lubricated interaction gap. Prod. Eng. 8 (3) (2014)
Fritz Klocke, Steffen Buchholz, Jens Stauder
Technology chain optimization: a systematic approach considering the manufacturing history. Prod. Eng. 8 (5) (2014)
Florian Degen, Fritz Klocke, Thomas Bergs, Philipp Ganser
Comparison of rotational turning and hard turning regarding surface generation. Prod. Eng. 8 (3) (2014)
E. Gräser, M. Hajeck, Alexander Bezold, Christoph Broeckmann, Markus Brumm, Fritz Klocke
Optimized density profiles for powder metallurgical gears. Prod. Eng. 8 (4) (2014)
Fritz Klocke, Thomas Bergs, Florian Degen, Philipp Ganser
Presentation of a novel cutting technology for precision machining of hardened, rotationally symmetric parts. Prod. Eng. 7 (2-3) (2013)
Christian Brecher, Fritz Klocke, Florestan Schindler, Andreas Janssen, Bettina Fischer, Jan-Patrick Hermani
Finishing of polycrystalline diamond tools by combining laser ablation with grinding. Prod. Eng. 7 (4) (2013)
Christian Brecher, Fritz Klocke, Markus Brumm, Ario Hardjosuwito
Simulation based model for tool life prediction in bevel gear cutting. Prod. Eng. 7 (2-3) (2013)
Fritz Klocke, P. Vogtel, Sascha Gierlings, Dieter Lung, Drazen Veselovac
Broaching of Inconel 718 with cemented carbide. Prod. Eng. 7 (6) (2013)
André Driemeyer Wilbert, Barbara Behrens, Olaf Dambon, Fritz Klocke
Robot Assisted Manufacturing System for High Gloss Finishing of Steel Molds. ICIRA (1) (2012)
Stefan Tönissen, Fritz Klocke, Björn Feldhaus, Steffen Buchholz, Markus Weiß
Residual stress prediction in quick point grinding. Prod. Eng. 6 (3) (2012)
Hendrik Puls, Fritz Klocke, Dieter Lung
A new experimental methodology to analyse the friction behaviour at the tool-chip interface in metal cutting. Prod. Eng. 6 (4-5) (2012)
Stefan Tönissen, Fritz Klocke, Björn Feldhaus, Steffen Buchholz
Modeling the characteristics of multi-technology platforms. Prod. Eng. 6 (1) (2012)
Thomas Auerbach, Marion Beckers, Guido Buchholz, Urs Eppelt, Yves-Simon Gloy, Peter Fritz, Toufik Al Khawli, Stephan Kratz, Juliane Lose, Thomas Molitor, Axel Reßmann, Ulrich Thombansen, Drazen Veselovac, Konrad Willms, Thomas Gries, Walter Michaeli, Christian Hopmann, Uwe Reisgen, Robert H. Schmitt, Fritz Klocke
Meta-modeling for Manufacturing Processes. ICIRA (2) (2011)
Fritz Klocke, Olaf Dambon, Barbara Behrens
Analysis of defect mechanisms in polishing of tool steels. Prod. Eng. 5 (5) (2011)
Fritz Klocke, Christof Gorgels, Gerd-Thomas Weber, Rolf Schalaster
Prognosis of the local tool wear in gear finish hobbing. Prod. Eng. 5 (6) (2011)
Christian Brecher, Fritz Klocke, Christof Gorgels, Ario Hardjosuwito
Manufacturing Simulation of Bevel Gear Cutting - Simulation based Approach for Tool Wear Analysis. SIMULTECH (2011)
Fritz Klocke, Stefan Tönissen, Hagen Wegner, Andreas Roderburg
Modeling economic efficiency of multi-technology platforms. Prod. Eng. 5 (3) (2011)
Fritz Klocke, Miguel Garzón, Jens Dieckmann, Andreas Klink
Process force analysis on sinking-EDM electrodes for the precision manufacturing. Prod. Eng. 5 (2) (2011)
Christian Brecher, Fritz Klocke, Tobias Breitbach, Dennis Do-Khac, Daniel Heinen, Andreas Karlberger, Chris-Jörg Rosen
A hybrid machining center for enabling new die manufacturing and repair concepts. Prod. Eng. 5 (4) (2011)
Michael Duscha, Fritz Klocke, Hagen Wegner
Residual Stress Model for Speed-Stroke Grinding of Hardened Steel with CBN Grinding Wheels. Int. J. Autom. Technol. 5 (3) (2011)
Christian Brecher, Fritz Klocke, Markus Brumm, Ario Hardjosuwito
Analysis and Optimization of Bevel Gear Cutting Processes by Means of Manufacturing Simulation. SIMULTECH (Selected Papers) (2011)
Fritz Klocke, Stephan Kratz, Thomas Auerbach, Sascha Gierlings, Guido Wirtz, Drazen Veselovac
Process Monitoring and Control of Machining Operations. Int. J. Autom. Technol. 5 (3) (2011)
Fritz Klocke, Nikolaos Michailidis, K.-D. Bouzakis, M. Witty, S. Gerardis, E. Lili, M. Pappa
Investigation of coated tools' cutting performance in milling Ti6Al4V and its correlation to the temperature dependent impact resistance of the film. Prod. Eng. 4 (5) (2010)
Fritz Klocke, M. Arft, Dieter Lung
Material-related aspects of the machinability of Austempered Ductile Iron. Prod. Eng. 4 (5) (2010)
Fritz Klocke, Barbara Linke, Dominik Schluetter
Development of a reliable grinding procedure for ceramic medical instruments. Prod. Eng. 4 (6) (2010)
Fritz Klocke, Christof Gorgels, Vasilios Vasiliou
Analysis of the influence of gear dimensions on cutting speed and contact conditions during the gear honing process. Prod. Eng. 3 (3) (2009)
Fritz Klocke, Christof Gorgels, Emmanouil Bouzakis, Arne Stuckenberg
Tool life increase of coated carbide tools by micro blasting. Prod. Eng. 3 (4-5) (2009)
Fritz Klocke, K. Gerschwiler, Mustapha Abouridouane
Size effects of micro drilling in steel. Prod. Eng. 3 (1) (2009)
Fritz Klocke, Vladimir Bäcker, Hagen Wegner, Björn Feldhaus, Hans-Uwe Baron, Roland Hessert
Influence of process and geometry parameters on the surface layer state after roller burnishing of IN718. Prod. Eng. 3 (4-5) (2009)
Jan C. Aurich, Dirk Biermann, Heribert Blum, Christian Brecher, Carsten Carstensen, Berend Denkena, Fritz Klocke, Matthias Kröger, Paul Steinmann, Klaus Weinert
Modelling and simulation of process: machine interaction in grinding. Prod. Eng. 3 (1) (2009)
Fritz Klocke, Barbara Linke
Mechanisms in the generation of grinding wheel topography by dressing. Prod. Eng. 2 (2) (2008)
Fritz Klocke, Drazen Veselovac, Thomas Auerbach, Robert Seidner
Intelligent Assembly for Aero Engine Components. ICIRA (2) (2008)
Fritz Klocke, Olaf Dambon, Richard Zunke
Modeling of contact behavior between polishing pad and workpiece surface. Prod. Eng. 2 (1) (2008)
Fritz Klocke, Björn Feldhaus, Sebastian Mader
Development of an incremental rolling process for the production of defined riblet surface structures. Prod. Eng. 1 (3) (2007)
Fritz Klocke, Christoph Zeppenfeld, Zwi Nachmani
Advanced grinding of titanium aluminides. Int. J. Manuf. Technol. Manag. 12 (1/2/3) (2007)
Fritz Klocke, Christian Derichs, Christoph Ader, Axel Demmer
Investigations on laser sintering of ceramic slurries. Prod. Eng. 1 (3) (2007)
Fritz Klocke, Tobias Schröder, Philipp Kauffmann
Fundamental study of surface densification of PM gears by rolling using FE analysis. Prod. Eng. 1 (2) (2007)
Fritz Klocke, Holger Willms
Methodology to describe the influence of manufacturing processes on the part functionality. Prod. Eng. 1 (2) (2007)
Fritz Klocke, Andreas Klink, Udo Schneider
Electrochemical oxidation analysis for dressing bronze-bonded diamond grinding wheels. Prod. Eng. 1 (2) (2007)
Fritz Klocke, Andreas M. Straube
Comparative Visualization of FEM-Based Cutting Simulations in a Virtual Environment. IPT/EGVE (2003)
Fritz Klocke, Ralf Raabe, Guenther Wiesner
Neuro-fuzzy Approach for Electro-discharge Sinking Process Control. Fuzzy Days (1997)
M. Weck, Fritz Klocke, H. Schell, E. Rüenauver
Evaluating alternative production cycles using the extended fuzzy AHP method. Eur. J. Oper. Res. 100 (2) (1997)
Walter Eversheim, Fritz Klocke, Wolfgang Schmitz, F. Brandenburg, N. Winands
Potentials and procedure for the integrated planning of production technologies in the early phases of product development. Eur. J. Oper. Res. 100 (2) (1997)