Meng-Shiun Tsai

Publication Activity (10 Years)

Years Active: 2006-2024
Publications (10 Years): 12

Top Topics

Camera Viewpoint

Top Venues

Robotics Comput. Integr. Manuf.

Publications

Jianwen Chen, Meng-Shiun Tsai, Wan-Ju Lin, Che-Lun Hung
A Novel End-to-End Ensemble UNet Network Based on Edge Computing for Tool Wear Detection. CACML (2024)
Meng-Shiun Tsai, Pei-Ze Chiang, Yi-Hsuan Tsai, Wei-Chen Chiu
Self-Supervised Feature Learning from Partial Point Clouds via Pose Disentanglement. IROS (2022)
Pei-Ze Chiang, Meng-Shiun Tsai, Hung-Yu Tseng, Wei-Sheng Lai, Wei-Chen Chiu
Stylizing 3D Scene via Implicit Representation and HyperNetwork. WACV (2022)
Meng-Shiun Tsai, Pei-Ze Chiang, Yi-Hsuan Tsai, Wei-Chen Chiu
Self-Supervised Feature Learning from Partial Point Clouds via Pose Disentanglement. CoRR (2022)
Pu-Yang Tang, Ming-Tsung Lin, Meng-Shiun Tsai, Chih-Chun Cheng
Toolpath interpolation with novel corner smoothing technique. Robotics Comput. Integr. Manuf. 78 (2022)
Pei-Ze Chiang, Meng-Shiun Tsai, Hung-Yu Tseng, Wei-Sheng Lai, Wei-Chen Chiu
Stylizing 3D Scene via Implicit Representation and HyperNetwork. CoRR (2021)
Xin-Yu Huang, Meng-Shiun Tsai, Ching-Chun Huang
3D Virtual-Reality Interaction System. ICCE-TW (2019)
Yu-Hao Chang, Chien-Sheng Liu, I-Wei Chen, Meng-Shiun Tsai, Hsiang-Chun Tseng
Open-Loop Control of Voice Coil Motor With Magnetic Restoring Force Using High-Low Frequency Composite Signals. IEEE Access 7 (2019)
Meng-Shiun Tsai, Pu-Yang Tang, Yu-Chan Wu, Chih-Kai Ho
Novel Interpolation Design for Five-Axis Tool Center Point Path Generation. AIM (2018)
Hong-Wei Huang, Meng-Shiun Tsai, Ming-Tsung Lin, Mao-Qi Hong, Teng-Yi Huang, Shin-Sheng Yang
Robust feedrate control for high efficiency milling process. AIM (2017)
Meng-Shiun Tsai, Hong-Wei Huang, Shin-Sheng Yang, Chia-Li Chou
Integrating input shaping technique with interpolator for vibration suppression. AIM (2016)
Meng-Shiun Tsai, Shu-Jui Chiu, Chung-Ching Liu, Pu-Yang Tang
Dynamic modeling and vibration suppression of the feed drive system. CASE (2015)
Meng-Shiun Tsai, Shih-Kai Wu, Hong-Wei Huang
Study on acceleration/deceleration feedrate planning for multi-block line segments using estimated contour error formulation. AIM (2014)
Meng-Shiun Tsai, Chung-Liang Yen, Hong-Tzong Yau
Development of Robust Learning Control and Application to Motion Control. ICINCO (1) (2012)
Meng-Shiun Tsai, Wei-Hsiang Yuan
Dynamic Modeling and Decentralized Control of a 3 PRS Parallel Mechanism Based on Constrained Robotic Analysis. J. Intell. Robotic Syst. 63 (3-4) (2011)
Meng-Shiun Tsai, Hao-Wei Nien, Hong-Tzong Yau
Development of an integrated look-ahead dynamics-based NURBS interpolator for high precision machinery. Comput. Aided Des. 40 (5) (2008)
Ming-Tzong Lin, Meng-Shiun Tsai, Hong-Tzong Yau
Development of real-time look-ahead algorithm for NURBS interpolator with consideration of servo dynamics. CDC (2007)
Meng-Shiun Tsai, Hao-Wei Nien, Hong-Tzong Yau
An integrated look-ahead dynamic interpolator for NURBS curve. CDC (2007)
Hong-Tzong Yau, Ming-Tzong Lin, Meng-Shiun Tsai
Real-time NURBS interpolation using FPGA for high speed motion control. Comput. Aided Des. 38 (10) (2006)
Meng-Shiun Tsai, Ming-Tzong Lin, Hong-Tzong Yau
Development of command-based iterative learning control algorithm with consideration of friction, disturbance, and noise effects. IEEE Trans. Control. Syst. Technol. 14 (3) (2006)