Jan G. Korvink

Publication Activity (10 Years)

Years Active: 1996-2022
Publications (10 Years): 12

Top Topics

Deformable Surface Model

Theoretical Considerations

Magnetic Resonance

Top Venues

J. Comput. Phys.

IEEE Trans. Biomed. Eng.

Publications

Yongbo Deng, Weihong Zhang, Zhenyu Liu, Jihong Zhu, Jan G. Korvink
Topology optimization for surface flows. J. Comput. Phys. 467 (2022)
Christian Marzi, Hosam Alagi, Olivia Rau, Jochen Hampe, Jan G. Korvink, Björn Hein, Franziska Mathis-Ullrich
Capacitive Proximity Sensor for Non-Contact Endoscope Localization. ICRA (2022)
Yongbo Deng, Weihong Zhang, Jihong Zhu, Yingjie Xu, Zhenyu Liu, Jan G. Korvink
Fiber bundle topology optimization for surface flows. CoRR (2022)
Erwin Fuhrer, Mazin Jouda, Christopher O. Klein, Manfred Wilhelm, Jan G. Korvink
Gradient-Induced Mechanical Vibration of Neural Interfaces During MRI. IEEE Trans. Biomed. Eng. 67 (3) (2020)
Yongbo Deng, Jan G. Korvink
Topology optimization of fluidic flows on 2-manifolds. CoRR (2020)
Markus Reischl, Mazin Jouda, Neil MacKinnon, Erwin Fuhrer, Natalia Bakhtina, Andreas Bartschat, Ralf Mikut, Jan G. Korvink
Motion prediction enables simulated MR-imaging of freely moving model organisms. PLoS Comput. Biol. 15 (12) (2019)
Sofia Toto, Pascal Nicolay, Gian Luca Morini, Michael Rapp, Jan G. Korvink, Juergen J. Brandner
Design and Simulation of a Wireless SAW-Pirani Sensor with Extended Range and Sensitivity. Sensors 19 (10) (2019)
Sofia Toto, Pascal Nicolay, Gian Luca Morini, Michael Rapp, Jan G. Korvink, Juergen J. Brandner
Correction: Design and Simulation of a Wireless SAW-Pirani Sensor with Extended Range and Sensitivity. Sensors 19 (14) (2019)
Yongbo Deng, Zhenyu Liu, Jan G. Korvink
Topology optimization on two-dimensional manifolds. CoRR (2019)
Omar Nassar, Dario Mager, Jan G. Korvink
A Novel Sensor Design and Fabrication for Wireless Interventional MRI Through Induction Coupling. IEEE SENSORS (2019)
Yongbo Deng, Jan G. Korvink
Self-consistent adjoint analysis for topology optimization of electromagnetic waves. J. Comput. Phys. 361 (2018)
Suzanne Smith, Dario Mager, Alexandra Perebikovsky, Ehsan Shamloo, David Kinahan, Rohit Mishra, Saraí M. Torres Delgado, Horacio Kido, Satadal Saha, Jens Ducrée, Marc Madou, Kevin Land, Jan G. Korvink
CD-Based Microfluidics for Primary Care in Extreme Point-of-Care Settings. Micromachines 7 (2) (2016)
M. Kudryavtsev, Evgenii B. Rudnyi, Jan G. Korvink, Dennis Hohlfeld, Tamara Bechtold
Computationally efficient and stable order reduction methods for a large-scale model of MEMS piezoelectric energy harvester. Microelectron. Reliab. 55 (5) (2015)
Mazin Jouda, Oliver G. Gruschke, Jan G. Korvink
Implementation of an in-field CMOS frequency division multiplexer for 9.4 T magnetic resonance applications. Int. J. Circuit Theory Appl. 43 (12) (2015)
David Kauzlaric, Marek Dynowski, Lars Pastewka, Andreas Greiner, Jan G. Korvink
SYMPLER: SYMbolic ParticLE simulatoR with grid-computing interface. Comput. Phys. Commun. 185 (3) (2014)
Peter T. While, Jan G. Korvink
Designing MR Shim Arrays With Irregular Coil Geometry: Theoretical Considerations. IEEE Trans. Biomed. Eng. 61 (6) (2014)
Ute Loffelmann, Dario Mager, Jan G. Korvink
Conductive and transparent gel microstructures fabricated by inkjet printing of ionic liquid based fluids. NEMS (2012)
Dennis Weiss, Andreas Greiner, Jan Lienemann, Jan G. Korvink
Electrowetting droplets investigated with smoothed particle hydrodynamics and moving least squares. NEMS (2012)
David Kauzlaric, Orly Liba, Yael Hanein, Pep Español, Andreas Greiner, Sauro Succi, Jan G. Korvink
Top-down vs. bottom-up coarse-graining of graphene and CNTs for nanodevice simulation. NEMS (2012)
Robert Ch. Meier, Vlad Badilita, Ulrike Wallrabe, Jan G. Korvink
Processing of 3D multilevel SU-8 fluidic network assisted by PerMX dry-photoresist lamination. NEMS (2012)
Andreas Senn, Andreas Peter, Jan G. Korvink
Analog circuit synthesis using two-port theory and genetic programming. AFRICON (2011)
Dario Mager, Andreas Peter, Laura Del Tin, Elmar Fischer, Patrick J. Smith, Jürgen Hennig, Jan G. Korvink
An MRI Receiver Coil Produced by Inkjet Printing Directly on to a Flexible Substrate. IEEE Trans. Medical Imaging 29 (2) (2010)
Lihong Feng, Peter Benner, Jan G. Korvink
Parametric model order reduction accelerated by subspace recycling. CDC (2009)
Christoph Hagleitner, Anthony R. Bonaccio, Hugo E. Rothuizen, Jan Lienemann, Dorothea Wiesmann, Giovanni Cherubini, Jan G. Korvink, Evangelos Eleftheriou
Modeling, Design, and Verification for the Analog Front-End of a MEMS-Based Parallel Scanning-Probe Storage Device. IEEE J. Solid State Circuits 42 (8) (2007)
Jan Lienemann, Andreas Greiner, Jan G. Korvink
Modeling, Simulation, and Optimization of Electrowetting. IEEE Trans. Comput. Aided Des. Integr. Circuits Syst. 25 (2) (2006)
Christoph Hagleitner, Anthony R. Bonaccio, Hugo E. Rothuizen, Dorothea Wiesmann, Jan Lienemann, Jan G. Korvink, Giovanni Cherubini, Evangelos Eleftheriou
Modeling, Design, and Verification for the Analog Front-end of a MEMS-based Parallel Scanning-probe Storage Device. CICC (2006)
Lihong Feng, Evgenii B. Rudnyi, Jan G. Korvink
Preserving the film coefficient as a parameter in the compact thermal model for fast electrothermal simulation. IEEE Trans. Comput. Aided Des. Integr. Circuits Syst. 24 (12) (2005)
Evgenii B. Rudnyi, Jan G. Korvink
Model Order Reduction for Large Scale Engineering Models Developed in ANSYS. PARA (2004)
Jens Müller, Jan G. Korvink
A general purpose adaptivity driver for FE software. Softw. Pract. Exp. 33 (12) (2003)
L. R. Van den Doel, Lucas J. van Vliet, K. T. Hjelt, Michael J. Vellekoop, Ian T. Young, F. Gromball, Jan G. Korvink
Nanometer-Scale Height Measurements in Micromachined Picoliter Vials Based on Interference Fringe Analysis. ICPR (2000)
Stefano Taschini, Markus Emmenegger, Henry Baltes, Jan G. Korvink
Smart Enumeration in C++: Virtual Construction, Message Dispatching and Tables. Softw. Pract. Exp. 29 (1) (1999)
Christoph Maier, Markus Emmenegger, Stefano Taschini, Henry Baltes, Jan G. Korvink
Equivalent circuit model of resistive IC sensors derived with the box integration method. IEEE Trans. Comput. Aided Des. Integr. Circuits Syst. 18 (7) (1999)
Martin Bächtold, Markus Emmenegger, Jan G. Korvink, Henry Baltes
An error indicator and automatic adaptive meshing for electrostatic boundary element simulations. IEEE Trans. Comput. Aided Des. Integr. Circuits Syst. 16 (12) (1997)
Martin Bächtold, Jan G. Korvink, Henry Baltes
Enhanced multipole acceleration technique for the solution of large Poisson computations. IEEE Trans. Comput. Aided Des. Integr. Circuits Syst. 15 (12) (1996)