Jean-Claude Léon

Publication Activity (10 Years)

Years Active: 1995-2021
Publications (10 Years): 10

Top Topics

Mechanical Devices

Stainless Steel

Top Venues

Comput. Aided Des.

J. Biomed. Semant.

3DOR@Eurographics

Publications

Youna Le Vaou, Jean-Claude Léon, Stefanie Hahmann, Stéphane Masfrand, Matthieu Mika
Feature Lines Modification Based on As-Stiff-As-Needed Surface Deformation. Comput. Aided Des. 140 (2021)
Youna Le Vaou, Jean-Claude Léon, Stefanie Hahmann, Stéphane Masfrand, Matthieu Mika
As-Stiff-As-Needed Surface DeformationCombining ARAP Energy with an Anisotropic Material. Comput. Aided Des. 121 (2020)
Robin Roussel, Marie-Paule Cani, Jean-Claude Léon, Niloy J. Mitra
Designing chain reaction contraptions from causal graphs. ACM Trans. Graph. 38 (4) (2019)
Robin Roussel, Marie-Paule Cani, Jean-Claude Léon, Niloy J. Mitra
Exploratory design of mechanical devices with motion constraints. Comput. Graph. 74 (2018)
Harold Vilmart, Jean-Claude Léon, Federico Ulliana
Extraction et Inférence de Connaissances à partir d'Assemblages Mécaniques Définis par une Représentation CAO 3D. EGC (2017)
Robin Roussel, Marie-Paule Cani, Jean-Claude Léon, Niloy J. Mitra
SPIROU: constrained exploration for mechanical motion design. SCF (2017)
Sébastien Crozet, Jean-Claude Léon, Xavier Merlhiot
Fast computation of contact points for robotic simulations based on CAD models without tessellation. IROS (2016)
Jean-Claude Léon, Thomas Dupeux, Jean-Rémy Chardonnet, Jérôme Perret
Dexterous Grasping Tasks Generated With an Add-on End Effector of a Haptic Feedback System. J. Comput. Inf. Sci. Eng. 16 (3) (2016)
Flavien Boussuge, Jean-Claude Léon, Stefanie Hahmann, Lionel Fine
Idealized models for FEA derived from generative modeling processes based on extrusion primitives. Eng. Comput. 31 (3) (2015)
Pierre-Yves Rabattu, Benoit Massé, Federico Ulliana, Marie-Christine Rousset, Damien Rohmer, Jean-Claude Léon, Olivier Palombi
My Corporis Fabrica Embryo: An ontology-based 3D spatio-temporal modeling of human embryo development. J. Biomed. Semant. 6 (2015)
K. Li, Gilles Foucault, Jean-Claude Léon, Moreno Trlin
Fast global and partial reflective symmetry analyses using boundary surfaces of mechanical components. Comput. Aided Des. 53 (2014)
François Jourdes, Georges-Pierre Bonneau, Stefanie Hahmann, Jean-Claude Léon, François Faure
Computation of components' interfaces in highly complex assemblies. Comput. Aided Des. 46 (2014)
Flavien Boussuge, Jean-Claude Léon, Stefanie Hahmann, Lionel Fine
Extraction of generative processes from B-Rep shapes and application to idealization transformations. Comput. Aided Des. 46 (2014)
Olivier Palombi, Federico Ulliana, Valentin Favier, Jean-Claude Léon, Marie-Christine Rousset
My Corporis Fabrica: an ontology-based tool for reasoning and querying on complex anatomical models. J. Biomed. Semant. 5 (2014)
Flavien Boussuge, Jean-Claude Léon, Stefanie Hahmann, Lionel Fine
Idealized Models for FEA Derived from Generative Modeling Processes Based on Extrusion Primitives. IMR (2013)
Gilles Foucault, Jean-Christophe Cuillière, Vincent François, Jean-Claude Léon, Roland Maranzana
Generalizing the advancing front method to composite surfaces in the context of meshing constraints topology. Comput. Aided Des. 45 (11) (2013)
Ahmad Shahwan, Jean-Claude Léon, Gilles Foucault, Moreno Trlin, Olivier Palombi
Qualitative behavioral reasoning from components' interfaces to components' functions for DMU adaption to FE analyses. Comput. Aided Des. 45 (2) (2013)
K. Li, Ahmad Shahwan, Moreno Trlin, Gilles Foucault, Jean-Claude Léon
Automated Contextual Annotation of B-Rep Cad Mechanical Components Deriving Technology and Symmetry Information to Support Partial Retrieval. 3DOR@Eurographics (2012)
Jean-Rémy Chardonnet, Jean-Claude Léon
Designing interaction in virtual worlds through a passive haptic peripheral. RO-MAN (2012)
Dobrina Boltcheva, David Canino, Sara Merino Aceituno, Jean-Claude Léon, Leila De Floriani, Franck Hétroy
An iterative algorithm for homology computation on simplicial shapes. Comput. Aided Des. 43 (11) (2011)
Thomas Delamé, Jean-Claude Léon, Marie-Paule Cani, Renaud Blanch
Gesture-based design of 2D contours: an alternative tosketching?. SBIM (2011)
Okba Hamri, Jean-Claude Léon, Franca Giannini, Bianca Falcidieno
Software environment for CAD/CAE integration. Adv. Eng. Softw. 41 (10-11) (2010)
Jean-Philippe Pernot, Franca Giannini, Bianca Falcidieno, Jean-Claude Léon
Parameterised free-form feature templates. Shape Modeling International (2009)
G. Drieux, Jean-Claude Léon, François Guillaume, Nicolas Chevassus
Processes to Integrate Design With Downstream Applications Through Product Shapes Adaptation. IEEE Syst. J. 3 (2) (2009)
Jean-Claude Léon, Leila De Floriani, Franck Hétroy
Classification of non-manifold singularities from transformations of 2-manifolds. Shape Modeling International (2009)
Jean-Claude Léon, Gilles Foucault
Prospective analysis for CAD-FEM integration and other product views. CAD/Graphics (2009)
Gilles Foucault, Jean-Christophe Cuillière, Vincent François, Jean-Claude Léon, Roland Maranzana
Adaptation of CAD model topology for finite element analysis. Comput. Aided Des. 40 (2) (2008)
Chao-Yaug Liao, Jean-Claude Léon, Cédric Masclet, Michel Bouriau, Patrice L. Baldeck, Tien-Tung Chung
Product Model Preparation and Processing for Micromanufacturing. J. Comput. Inf. Sci. Eng. 8 (2) (2008)
Jean-Philippe Pernot, Bianca Falcidieno, Franca Giannini, Jean-Claude Léon
Incorporating free-form features in aesthetic and engineering product design: State-of-the-art report. Comput. Ind. 59 (6) (2008)
Robert Iacob, Peter Mitrouchev, Jean-Claude Léon
Contact identification for assembly-disassembly simulation with a haptic device. Vis. Comput. 24 (11) (2008)
Jon Mikkelsen Hjelmervik, Jean-Claude Léon
Simplification of FEM-Models on Cell BE. MMCS (2008)
Vincent Cheutet, Marc Daniel, Stefanie Hahmann, Raphaël La Greca, Jean-Claude Léon, Robert Maculet, David Ménegaux, Basile Sauvage
Constraint Modeling for Curves and Surfaces in CAGD: a Survey. Int. J. Shape Model. 13 (2) (2007)
Gilles Foucault, Jean-Christophe Cuillière, Vincent François, Jean-Claude Léon, Roland Maranzana
An Extension of the Advancing Front Method to Composite Geometry. IMR (2007)
Jon Mikkelsen Hjelmervik, Jean-Claude Léon
GPU-Accelerated Shape Simplification for Mechanical-Based Applications. Shape Modeling International (2007)
Rosalinda Ferrandes, Philippe M. Marin, Jean-Claude Léon, Franca Giannini
Preparation of Finite Element Models: The Use of an a Posteriori Mechanical Criterion. Eurographics Italian Chapter Conference (2006)
Jean-Claude Léon, Lionel Fine
A new approach to the preparation of models for FE analyses. Int. J. Comput. Appl. Technol. 23 (2-4) (2005)
Jean-Philippe Pernot, Stephane Guillet, Jean-Claude Léon, Bianca Falcidieno, Franca Giannini
Shape Tuning in Fully Free-Form Deformation Features. J. Comput. Inf. Sci. Eng. 5 (2) (2005)
G. Drieux, Jean-Claude Léon, Nicolas Chevassus, François Guillaume
A formal description of preparation processes for geometric models to improve downstream activities integration in the design process. CSCWD (2) (2005)
Vincent Cheutet, Chiara Eva Catalano, Jean-Philippe Pernot, Bianca Falcidieno, Franca Giannini, Jean-Claude Léon
3D sketching for aesthetic design using fully free-form deformation features. Comput. Graph. 29 (6) (2005)
David Lesage, Jean-Claude Léon, Philippe Véron
Discrete Curvature Approximations and Segmentation of Polyhedral Surfaces. Int. J. Shape Model. 11 (2) (2005)
Alexei Mikchevitch, Jean-Claude Léon, Alexandre Gouskov
Towards Position Feedback Control Interfaces: Application to a Virtual Assembly of Flexible Parts. WHC (2005)
Vincent Cheutet, Jean-Philippe Pernot, Jean-Claude Léon, Bianca Falcidieno, Franca Giannini
Inserting G1 Discontinuities into Free-form Features for Aesthetic Design. WSCG (Short Papers) (2004)
Alexei Mikchevitch, Jean-Claude Léon, Alexandre Gouskov
Flexible Beam Part Manipulation for Assembly Operation Simulation in a Virtual Reality Environment. J. Comput. Inf. Sci. Eng. 4 (2) (2004)
Vincent Cheutet, Chiara Eva Catalano, Jean-Philippe Pernot, Bianca Falcidieno, Franca Giannini, Jean-Claude Léon
3D Sketching with Fully Free Form Deformation Features (d-F4) for Aesthetic Design. SBM (2004)
Gilles Foucault, Philippe M. Marin, Jean-Claude Léon
Mechanical Criteria for the Preparation of Finite Element Models. IMR (2004)
Jean-Philippe Pernot, Stephane Guillet, Jean-Claude Léon, Bianca Falcidieno, Franca Giannini
Multi-Minimisations for Shape Control of Fully Free-Form Deformation Features. SMI (2004)
Jean-Philippe Pernot, Bianca Falcidieno, Franca Giannini, Stephane Guillet, Jean-Claude Léon
Modelling free-form surfaces using a feature-based approach. Symposium on Solid Modeling and Applications (2003)
Jean-Philippe Pernot, Stephane Guillet, Jean-Claude Léon, Franca Giannini, Chiara Eva Catalano, Bianca Falcidieno
A Shape Deformation Tool to Model Character Lines in the Early Design Phases. Shape Modeling International (2002)
Vicente Riboulet, Philippe M. Marin, Jean-Claude Léon
Toward a new set of tools for a collaborative design environment. CSCWD (2002)
Jean-Philippe Pernot, Stephane Guillet, Jean-Claude Léon, Franca Giannini, Bianca Falcidieno, Chiara Eva Catalano
A Shape Deformation Tool to Model Character Lines in the Early Design Phases (figures 11, 12, and 13). Shape Modeling International (2002)
Philippe Véron, Jean-Claude Léon
Using Polyhedral Models to Automatically Sketch Idealized Geometry for Structural Analysis. Eng. Comput. 17 (4) (2001)
Jean-Claude Léon, U. Gandiaga, D. Dupont
Modelling Flexible Parts for Virtual Reality Assembly Simulations which Interact with Their Environment. Shape Modeling International (2001)
Philippe Véron, Jean-Claude Léon
Shape preserving polyhedral simplification with bounded error. Comput. Graph. 22 (5) (1998)
Stephane Guillet, Jean-Claude Léon
Parametrically deformed free-form surfaces as part of a variational model. Comput. Aided Des. 30 (8) (1998)
Jean-Claude Léon, Philippe Véron
Semiglobal deformation and correction of free- form surfaces using a mechanical alternative. Vis. Comput. 13 (3) (1997)
Philippe Véron, Jean-Claude Léon
Static polyhedron simplification using error measurements. Comput. Aided Des. 29 (4) (1997)
Jean-Claude Léon, Philippe Trompette
A new approach towards free-form surfaces control. Comput. Aided Geom. Des. 12 (4) (1995)