Ignazio Marongiu

Publication Activity (10 Years)

Years Active: 1999-2018
Publications (10 Years): 5

Top Topics

Control Algorithm

Electric Vehicles

Permanent Magnet Synchronous

Top Venues

IEEE Trans. Ind. Electron.

J. Frankl. Inst.

IEEE Trans. Ind. Informatics

Publications

Mario Porru, Alessandro Serpi, Ignazio Marongiu, Alfonso Damiano
Suppression of DC-link voltage unbalance in three-level neutral-point clamped converters. J. Frankl. Inst. 355 (2) (2018)
Federico Deiana, Alessandro Serpi, Ignazio Marongiu, Gianluca Gatto, Johan Abrahamsson
Efficiency assessment of permanent magnet synchronous machines for High-Speed Flywheel Energy Storage Systems. IECON (2016)
Alessandro Serpi, Giuseppe Fois, Federico Deiana, Gianluca Gatto, Ignazio Marongiu
Performance improvement of brushless DC machine by zero-sequence current injection. IECON (2015)
Ivan Luigi Spano, Sara Sulis, Alessandro Serpi, Ignazio Marongiu, Gianluca Gatto, Vincenzo Nissardi
An Automatic Sensing Test procedure for Implantable Cardioverter Defibrillators. MeMeA (2015)
Mario Porru, Alessandro Serpi, Ignazio Marongiu, Alfonso Damiano
A novel hybrid energy storage system for electric vehicles. IECON (2015)
Alfonso Damiano, Gianluca Gatto, Ignazio Marongiu, Aldo Perfetto, Alessandro Serpi
Operating Constraints Management of a Surface-Mounted PM Synchronous Machine by Means of an FPGA-Based Model Predictive Control Algorithm. IEEE Trans. Ind. Informatics 10 (1) (2014)
Andrea Mocci, Alessandro Serpi, Ignazio Marongiu, Gianluca Gatto
Enhanced modeling of DC-DC power converters by means of averaging technique. IECON (2014)
Mario Porru, Alessandro Serpi, Ignazio Marongiu, Alfonso Damiano
A novel DC-link voltage and current control algorithm for Neutral-Point-Clamped converters. IECON (2014)
Alfonso Damiano, Gianluca Gatto, Ignazio Marongiu, Alessandro Serpi, Aldo Perfetto
A novel flux-weakening approach for Surface-Mounted Permanent Magnet Synchronous Machines. IECON (2013)
Gianluca Gatto, Ignazio Marongiu, Alessandro Serpi
Discrete-Time Parameter Identification of a Surface-Mounted Permanent Magnet Synchronous Machine. IEEE Trans. Ind. Electron. 60 (11) (2013)
Alfonso Damiano, Ignazio Marongiu, Andrea Monni, Mario Porru
Design of a 10 MW multi-phase PM synchronous generator for direct-drive wind turbines. IECON (2013)
Alfonso Damiano, Ignazio Marongiu, Mario Porru, Alessandro Serpi
A suitable PWM for DC-link voltage equalization of Three-Level Neutral-Point Clamped Converters. IECON (2013)
Alfonso Damiano, Ignazio Marongiu, Claudia Musio, Maura Musio
Concentrator photovoltaic standards: Experimental analyses of technical requirements. IECON (2013)
Gianluca Gatto, Ignazio Marongiu, Andrea Mocci, Alessandro Serpi, Ivan Luigi Spano
An improved averaged model for boost DC-DC converters. IECON (2013)
Gianluca Gatto, Ignazio Marongiu, Andrea Mocci, Alessandro Serpi, Ivan Luigi Spano
A novel continuous-time equivalent circuit for boost DC-DC converters. IECON (2013)
Alfonso Damiano, Ignazio Marongiu, Claudia Musio, Maura Musio
Outdoor characterization of a Cassegrain-type concentrator photovoltaic receiver. IECON (2013)
Gianluca Gatto, Ignazio Marongiu, Alessandro Serpi, Aldo Perfetto
Predictive control of standalone brushless DC generators. ICECS (2009)
Alfonso Damiano, Gianluca Gatto, Ignazio Marongiu, Alessandro Pisano
Second-order sliding-mode control of DC drives. IEEE Trans. Ind. Electron. 51 (2) (2004)
Giorgio Bartolini, Alfonso Damiano, Gianluca Gatto, Ignazio Marongiu, Alessandro Pisano, Elio Usai
Robust speed and torque estimation in electrical drives by second-order sliding modes. IEEE Trans. Control. Syst. Technol. 11 (1) (2003)
Alfonso Damiano, Gianluca Gatto, Ignazio Marongiu, Alessandro Pisano, Elio Usai
Rotor speed estimation in electrical drives via digital second order sliding differentiator. ECC (1999)