Guofang Gong

Publication Activity (10 Years)

Years Active: 2009-2024
Publications (10 Years): 10

Top Topics

Tunnel Boring Machine

Control Strategy

Feedback Controller

Top Venues

IEEE Trans. Ind. Electron.

J. Syst. Control. Eng.

Publications

Pengfei Han, Fang Lu, Guofang Gong, Huayong Yang, Dong Han
A Bistable Four-Working-States Electromagnetic Mini Valve Based on Flexible Magnets for Pneumatic Soft Actuators. IEEE Trans. Ind. Electron. 71 (9) (2024)
Guangda Qiao, Fang Lu, Guofang Gong, Huayong Yang, Dong Han
A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source. IEEE Trans. Ind. Electron. 71 (6) (2024)
Longkai Wang, Shilun Du, Guofang Gong, Yong Lei
Design and Test of Hardware-in-the-Loop Platform for Vehicle Chassis CAN System with Intermittent Open and Short Connection Faults. M2VIP (2023)
Fei Wang, Guofang Gong, Yongfeng Qin, Chenchen Sun, Huayong Yang
A novel cutterhead cascade control strategy for hybrid-driving tunnel boring machines. J. Syst. Control. Eng. 234 (8) (2020)
Guofang Gong, Fei Wang, Yongfeng Qin, Chenchen Sun
Nonlinear Disturbance Observer based Integral Sliding Mode Control for Tunnel Boring Machine. RCAR (2019)
Chenchen Sun, Guofang Gong, Huayong Yang, Fei Wang
Fuzzy sliding mode control for synchronization of multiple induction motors drive. Trans. Inst. Meas. Control 41 (11) (2019)
Wenjing Li, Guofang Gong, Yuanchao Wang, Yakun Zhang, Yuxi Chen
Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System. AIM (2019)
Xiong-bin Peng, Guofang Gong, Huayong Yang, Hai-yang Lou, Weiqiang Wu, Tong Liu
Quantitative feedback controller design and test for an electro-hydraulic position control system in a large-scale reflecting telescope. Frontiers Inf. Technol. Electron. Eng. 18 (10) (2017)
Shuo Ding, Xiaoping Ouyang, Boqian Fan, Huayong Yang, Guofang Gong
Dynamic simulation of a hydraulic exoskeleton robot based on virtual prototyping. AIM (2016)
Tong Li, Qingguo Li, Tao Liu, Jingang Yi, Guofang Gong
Development of a novel elastic load-carrying device: Design, modeling and analysis. AIM (2016)
Yunyi Rao, Guofang Gong, Xu Yang, Jianjun Zhou
Research on geologic adaptive control of ground pressure for single gripping TBM. ICCAIS (2015)
Zhen Zhang, Guofang Gong, Huayong Yang, Weiqiang Wu, Tong Liu
Synchronization Control of Torque Cylinders for Hard Rock Tunnel Boring Machine. ICIRA (3) (2015)
Hu Shi, Guofang Gong, Xuesong Mei, Xiaohu Li
An experimental study on energy saving potential for cutterhead drive of shield Tunneling machine using variable-speed hydraulic system. AIM (2014)
Lintao Wang, Guofang Gong, Hu Shi, Dianqing Hou
Positioning Precision and Impact Force Control of Segment Erector for Shield Tunneling Machine. ICDMA (2012)
Xuelan Yang, Guofang Gong, Yi Liu, Chaoqing Min
Research on Dynamic Characteristics of the Rotary Valve. ICDMA (2012)
Yi Liu, Guofang Gong, Chaoqing Min, Xuelan Yang
Parametric Analysis of New Tamping Device Based on the Mathematic Modeling. ICDMA (2011)
Huaiyin Liu, Guofang Gong, Hu Shi, Lintao Wang
Modeling of Hydraulic Controlled and Regulated Direct Method in the Cutter System of Shield Tunneling Machine. ICDMA (2011)
Lintao Wang, Guofang Gong, Hu Shi, Huaiyin Liu
Rotation and Gate Movement Compound Control of Screw Conveyor Hydraulic System with Disturbance Compensation. ICIRA (1) (2010)
Beidou Zhu, Guofang Gong, Hu Shi
Electrohydraulic Control of Thrust Hydraulic System for Shield Tunneling Machine. ICIRA (2009)
Hu Shi, Guofang Gong, Huayong Yang, Rulin Zhou
Position and Attitude Precision Analysis of Segment Erector of Shield Tunneling Machine. ICIRA (2009)