Konrad Wegener

Publication Activity (10 Years)

Years Active: 1981-2023
Publications (10 Years): 20

Top Topics

Gaussian Process Models

Error Compensation

Quadratic Programming

Top Venues

Int. J. Autom. Technol.

Int. J. Model. Identif. Control.

Publications

Florian Mauz, Remo Wigger, Loris Griesbaum, Tobias Wahl, Michal Kuffa, Konrad Wegener
Acoustic Roughness Measurement of Railway Tracks: Running Surface Detection and Compensation of Lateral Movements for Optical Measurements on a Train. Sensors 23 (12) (2023)
Natanael Lanz, Sascha Weikert, Konrad Wegener
New Control Parametrization Strategy for Flexible Feed Drives. Int. J. Autom. Technol. 16 (4) (2022)
Fabian Stoop, Josef Mayr, Clemens Sulz, Friedrich Bleicher, Konrad Wegener
Fleet learning of thermal error compensation in machine tools. ETFA (2021)
Eduard Relea, Varun Urundolil Kumaran, Alberto Sanchez Cebrian, Christian Gschnitzer-Bärnthaler, Markus Zogg, Lukás Weiss, Konrad Wegener
Utilization of CFRP in High-Speed Stamping Presses and its Gigacycle Fatigue Testing at Resonance Frequency. Int. J. Autom. Technol. 14 (2) (2020)
Pablo Hernández-Becerro, Daniel Spescha, Konrad Wegener
Model order reduction of thermo-mechanical models with parametric convective boundary conditions: focus on machine tool. CoRR (2020)
Markus Maier, Alisa Rupenyan, Christian Bobst, Konrad Wegener
Self-Optimizing Grinding Machines using Gaussian Process Models and Constrained Bayesian Optimization. CoRR (2020)
Konrad Wegener, Atsushi Matsubara
Editorial: Advanced Material Driven Design of Machine Tools. Int. J. Autom. Technol. 14 (2) (2020)
Timo Bänziger, Andreas M. Kunz, Konrad Wegener
Optimizing human-robot task allocation using a simulation tool based on standardized work descriptions. J. Intell. Manuf. 31 (7) (2020)
Titus Haas, Sascha Weikert, Konrad Wegener
MPCC-Based Set Point Optimisation for Machine Tools. Int. J. Autom. Technol. 13 (3) (2019)
Natanael Lanz, Daniel Spescha, Sascha Weikert, Konrad Wegener
Efficient Static and Dynamic Modelling of Machine Structures with Large Linear Motions. Int. J. Autom. Technol. 12 (5) (2018)
Matthias Röthlin, Hagen Klippel, Konrad Wegener
Meshless Methods for Large Deformation Elastodynamics. CoRR (2018)
Daniel Spescha, Sascha Weikert, Oliver Zirn, Konrad Wegener
Synchronisation of Feed Axes with Differing Bandwidths Using Set Point Delay. Int. J. Autom. Technol. 11 (2) (2017)
Timo Bänziger, Andreas M. Kunz, Konrad Wegener
A Library of Skills and Behaviors for Smart Mobile Assistant Robots in Automotive Assembly Lines. HRI (Companion) (2017)
Titus Haas, Maximilian Warhanek, Michael Dietlicher, Konrad Wegener
Increased Productivity for Redundant Laser Scanners Using an Optimal Trajectory Separation Method. Int. J. Autom. Technol. 10 (6) (2016)
Konrad Wegener, Sascha Weikert, Josef Mayr
Age of Compensation - Challenge and Chance for Machine Tool Industry. Int. J. Autom. Technol. 10 (4) (2016)
Florian Sellmann, Titus Haas, Hop Nguyen, Sascha Weikert, Konrad Wegener
Orientation Smoothing for 5-Axis Machining Using Quasi-Redundant Degrees of Freedom. Int. J. Autom. Technol. 10 (2) (2016)
Johannes Teiwes, Timo Bänziger, Andreas M. Kunz, Konrad Wegener
Identifying the potential of human-robot collaboration in automotive assembly lines using a standardised work description. ICAC (2016)
Florian Sellmann, Titus Haas, Hop Nguyen, Sascha Weikert, Konrad Wegener
Geometry Optimisation for 2D Cutting: A Quadratic Programming Approach. Int. J. Autom. Technol. 10 (2) (2016)
Timo Schudeleit, Simon Züst, Lukás Weiss, Konrad Wegener
Machine Tool Energy Efficiency - A Component Mapping-Based Approach. Int. J. Autom. Technol. 10 (5) (2016)
Lennart Bochmann, Lars Gehrke, Adrian Böckenkamp, Frank Weichert, Rainer Albersmann, Christian Prasse, Christoph Mertens, Marco Motta, Konrad Wegener
Towards Decentralized Production: A Novel Method to Identify Flexibility Potentials in Production Sequences Based on Flexibility Graphs. Int. J. Autom. Technol. 9 (3) (2015)
Michael Gebhardt, Alexander Schneeberger, Sascha Weikert, Wolfgang Knapp, Konrad Wegener
Thermally Caused Location Errors of Rotary Axes of 5-Axis Machine Tools. Int. J. Autom. Technol. 8 (4) (2014)
Marcel Henerichs, Michael Egeter, Thomas Liebrich, Robert Voß, Konrad Wegener
Evaluation of the IWF-Wunder Reproduction Method for Generating Positive Replica. Int. J. Autom. Technol. 8 (1) (2014)
Raoul Roth, Beck Lukas, Hartmi Balzer, Friedrich Kuster, Eduardo Weingärtner, Konrad Wegener
Influence of the Anode Material and the Flushing Gas on the Dry Electrical Discharge Machining Process. Int. J. Autom. Technol. 7 (5) (2013)
Gregory Eberle, Claus Dold, Konrad Wegener
Building a vector model representation of a two-axis laser scanhead using numerical analysis for simulation purposes. Int. J. Model. Identif. Control. 20 (3) (2013)
Konrad Wegener
Moderne Stapelverarbeitung. Angew. Inform. 23 (1) (1981)