Gijs J. M. Krijnen

Publication Activity (10 Years)

Years Active: 2010-2022
Publications (10 Years): 18

Top Topics

Aerial Image Sequences

Micro Controller

Position Estimation

Mathematical Expressions

Top Venues

Publications

Gerjan Wolterink, Stijn Kolkman, Gijs J. M. Krijnen
3D Printed Soft Robotic Actuator With Embedded Strain Sensing For Position Estimation. IEEE SENSORS (2022)
Martijn Schouten, Philip van de Maat, Kostas Nizamis, Gijs J. M. Krijnen
Evaluating 3D printed sEMG electrodes with silver ink traces using in-situ impedance measurements. IEEE SENSORS (2022)
Dimitrios Kosmas, Hans-Peter van Jonbergen, Martijn Schouten, Momen Abayazid, Gijs J. M. Krijnen
Development of a 3D Printed Gap Gauge with Embedded Force Sensor for Balancing Unicompartmental Knee Arthroplasty. IEEE SENSORS (2021)
Alexander Dijkshoorn, Thijs Hamstra, Remco Sanders, Stefano Stramigioli, Gijs J. M. Krijnen
DC Electric Metamaterial Behaviour in Tuned Fused Deposition Modelling Prints. IEEE SENSORS (2021)
Gerjan Wolterink, Remco G. P. Sanders, Bert-Jan van Beijnum, Peter H. Veltink, Gijs J. M. Krijnen
A 3D-Printed Soft Fingertip Sensor for Providing Information about Normal and Shear Components of Interaction Forces. Sensors 21 (13) (2021)
Alexander Dijkshoorn, Martijn Schouten, Stefano Stramigioli, Gijs J. M. Krijnen
Modelling of Anisotropic Electrical Conduction in Layered Structures 3D-Printed with Fused Deposition Modelling. Sensors 21 (11) (2021)
Martijn Schouten, Gijs J. M. Krijnen
Characterization of 3D printed sheets using multi-frequency scanning impedance microscopy. IEEE SENSORS (2021)
Martijn Schouten, Dimitrios Kosmas, Gijs J. M. Krijnen
Hysteresis Compensation of 3D Printed Sensors Using a Power Law Model for Various Input Signals. IEEE SENSORS (2020)
Alexander Dijkshoorn, Patrick Neuvel, Stefano Stramigioli, Gijs J. M. Krijnen
In-Situ Monitoring of Layer-Wise Fabrication by Electrical Resistance Measurements in 3D Printing. IEEE SENSORS (2020)
Gerjan Wolterink, Ameya Umrani, Martijn Schouten, Remco G. P. Sanders, Gijs J. M. Krijnen
3D-Printed Calorimetric Flow Sensor. IEEE SENSORS (2020)
Gerjan Wolterink, Pedro Dias, Remco G. P. Sanders, Frodo Muijzer, Bert-Jan van Beijnum, Peter H. Veltink, Gijs J. M. Krijnen
Development of Soft sEMG Sensing Structures Using 3D-Printing Technologies. Sensors 20 (15) (2020)
Martijn Schouten, Bernard Prakken, Remco Sanders, Gijs J. M. Krijnen
Linearisation of a 3D printed flexible tactile sensor based on piezoresistive sensing. IEEE SENSORS (2019)
Gerjan Wolterink, Remco Sanders, Gijs J. M. Krijnen
A flexible, three material, 3D-printed, shear force sensor for use on finger tips. IEEE SENSORS (2019)
Gerjan Wolterink, Remco Sanders, Gijs J. M. Krijnen
Thin, Flexible, Capacitive Force Sensors Based on Anisotropy in 3D-Printed Structures. IEEE SENSORS (2018)
Gerjan Wolterink, Remco Sanders, Frodo Muijzer, Bert-Jan van Beijnum, Gijs J. M. Krijnen
3D-printing soft sEMG sensing structures. IEEE SENSORS (2017)
Bram Eijking, Remco Sanders, Gijs J. M. Krijnen
Development of whisker inspired 3D multi-material printed flexible tactile sensors. IEEE SENSORS (2017)
Martijn Schouten, Remco G. P. Sanders, Gijs J. M. Krijnen
3D printed flexible capacitive force sensor with a simple micro-controller based readout. IEEE SENSORS (2017)
John Delamare, Remco Sanders, Gijs J. M. Krijnen
3D printed biomimetic whisker-based sensor with co-planar capacitive sensing. IEEE SENSORS (2016)
Harmen Droogendijk, Christiaan M. Bruinink, Remco G. P. Sanders, Gijs J. M. Krijnen
Tunable Sensor Response by Voltage-Control in Biomimetic Hair Flow Sensors. Micromachines 4 (1) (2013)
Antoine Legrain, T. G. Janson, J. W. Berenschot, Gijs J. M. Krijnen, Leon Abelmann, Niels R. Tas
Controllable elastocapillary folding of silicon nitride 3D structures by through-wafer filling. NEMS (2013)
Edin Sarajlic, Christophe Yamahata, Erwin Berenschot, Niels R. Tas, Hiroyuki Fujita, Gijs J. M. Krijnen
High-Performance Shuffle Motor Fabricated by Vertical Trench Isolation Technology. Micromachines 1 (2) (2010)