Eberhard Abele

Publication Activity (10 Years)

Years Active: 1985-2020
Publications (10 Years): 7

Top Topics

Mixed Integer Linear Programming

Learning Design

Top Venues

it Inf. Technol.

Int. J. Comput. Integr. Manuf.

Publications

Romol Chadda, Johanna Probst, Claas Hartmann, Martin Link, Markus Hessinger, Eberhard Abele, Matthias Weigold, Mario Kupnik
Disruptive Force Sensor Based on Laser-based Powder-Bed-Fusion. IEEE SENSORS (2020)
Eberhard Abele, Klaus Schützer, S. Güth, A. Meinhard
Deburring of cross-drilled holes with ball-end cutters - modeling the tool path. Prod. Eng. 12 (1) (2018)
Paul Schott, Raphael Ahrens, Dennis Bauer, Fabian Hering, Robert Keller, Jaroslav Pullmann, Daniel Schel, Jens Schimmelpfennig, Peter Simon, Thomas Weber, Eberhard Abele, Thomas Bauernhansl, Gilbert Fridgen, Matthias Jarke, Gunther Reinhart
Flexible IT platform for synchronizing energy demands with volatile markets. it Inf. Technol. 60 (3) (2018)
Eberhard Abele, F. Dohnal, M. Feulner, T. Sielaff, C. Daume
Numerical investigation of chatter suppression via parametric anti-resonance in a motorized spindle unit during milling. Prod. Eng. 12 (3-4) (2018)
Thomas Weber, Nina Strobel, Thomas Kohne, Jakob Wolber, Eberhard Abele
Realistic modeling of a combined heat and power plant in the context of mixed integer linear programming. Energy Inform. 1 (S1) (2018)
M. Tisch, C. Hertle, Eberhard Abele, Joachim Metternich, Ralf Tenberg
Learning factory design: a competency-oriented approach integrating three design levels. Int. J. Comput. Integr. Manuf. 29 (12) (2016)
Eberhard Abele, Guido Pfeiffer, Behzad Jalizi, Andreas Bretz
-control for a machine tool with a gantry portal. Prod. Eng. 10 (4-5) (2016)
Eberhard Abele, Jia Tian
Estimation of the rotational speed limit of milling cutters with screwed indexable inserts. Prod. Eng. 8 (1-2) (2014)
Eberhard Abele, Christian Brecher, Stephan Cornelius Gsell, Alexander Hassis, Dennis Korff
Steps towards a protection system for machine tool main spindles against crash-caused damages. Prod. Eng. 6 (6) (2012)
Eberhard Abele, Klaus Schützer, J. Bauer, M. Pischan
Tool path adaption based on optical measurement data for milling with industrial robots. Prod. Eng. 6 (4-5) (2012)
Eberhard Abele, T. Sielaff, Andreas Schiffler
Method for chatter detection with standard PLC systems. Prod. Eng. 6 (6) (2012)
Eberhard Abele, Sören Dietz, Andreas Schiffler
Analysis of cutting force during milling with regards to the dependency on the penetration angle. Prod. Eng. 3 (4-5) (2009)
Eberhard Abele, Stefan Rothenbücher, Matthias Weigold
Cartesian compliance model for industrial robots using virtual joints. Prod. Eng. 2 (3) (2008)
Eberhard Abele, Burkhard Schramm
coolant system. Prod. Eng. 2 (2) (2008)
Eberhard Abele, Holger Hanselka, Frerk Haase, Daniel Schlote, Andreas Schiffler
Development and design of an active work piece holder driven by piezo actuators. Prod. Eng. 2 (4) (2008)
Eberhard Abele, Andreas Schiffler, Stefan Rothenbücher
System identification during milling via active magnetic bearing. Prod. Eng. 1 (3) (2007)
Eberhard Abele, Andreas Ellermeier, Julien Hohenstein, Matthias Tschannerl
Tool length influence on wear behaviour of twisted carbide drills. Prod. Eng. 1 (1) (2007)
Eberhard Abele, Arno Wörn, Jürgen Fleischer, Jan Wieser, Patrick Martin, Robert Klöpper
Mechanical module interfaces for reconfigurable machine tools. Prod. Eng. 1 (4) (2007)
Eberhard Abele, Madhu Munirathnam, Michael Roth
Dynamic behaviour of protective covers in machine tools. Prod. Eng. 1 (2) (2007)
Eberhard Abele, Stefan Rothenbücher, Andreas Schiffler
Digitally controlled output filters for improvement of temperature behavior of machine tool main spindle drives. Prod. Eng. 1 (2) (2007)
Eberhard Abele, Rudolf Bäßler, Ernst Michael Wolf
Application-fields of flexible automated assembly systems. Robotics 1 (2) (1985)