Ingo Hahn

Publication Activity (10 Years)

Years Active: 2013-2022
Publications (10 Years): 20

Top Topics

Equivalent Circuit

Top Venues

Publications

Shabnam Ruzbehi, Ingo Hahn
Topology Optimization of a PM Synchronous Machine Based on Novel Metaheuristic Algorithm for Lower Cogging Torque and Magnet Volume. ICIT (2022)
Johannes Wagner, Ingo Hahn
Modelling the Influence of the Mechanical Forces on the Commutation Process of a DC Motor. IECON (2021)
Shima Khoshzaman, Yikai Tang, Ingo Hahn
Dynamic On-State Resistance Characterization of GaN FET under Hard-Switching Conditions. IECON (2021)
Jaeho Ryu, Ingo Hahn
Numerical modeling for 3D eddy current calculation in magneto-quasistatic approximation. ICIT (2021)
Shabnam Ruzbehi, Ingo Hahn
Two-level Topology Optimization based on a Metaheuristic Method and Morphological Reconstruction. IECON (2021)
Matthias Stiller, Ingo Hahn
Deterministic winding function model for slotted induction machines validated by air gap magnetic field measurements. IECON (2021)
Shima Khoshzaman, Ingo Hahn
A Performance Comparison of GaN FET and Silicon MOSFET. ICIT (2021)
Sara Hosseini, Ingo Hahn
Kinodynamic Motion Planning and Energy Loss Cost Function Modelling for a 2- DOF Robot Arm Manipulator. ICIT (2020)
Shabnam Ruzbehi, Ingo Hahn
Two-level Topology Optimization of an Electromagnetic Actuator Based on Genetic Algorithm and Neighbourhood Method. ICIT (2020)
Andrea Floris, Alessandro Serpi, Alfonso Damiano, Ingo Hahn
Torque Harmonics Minimization of Double-Stage Magnetic Gear Transmission System. IECON (2019)
Shabnam Ruzbehi, Ingo Hahn
Structural Optimization of an Electromagnetic Actuator Based on Genetic Algorithm, Greedy Search and Their Combination. ISIE (2019)
Sara Hosseini, Ingo Hahn
Nonlinear Optimization of Energy Consumption in Trajectory Planning of a Single-axis Electrical Drive. ISIE (2019)
Christoph Hittinger, Ingo Hahn
Resistance- and Inductance-Based Self-Sensing Control using Short-Circuited Windings on the Rotor of a SPMSM. IECON (2019)
Jaeho Ryu, Ingo Hahn
Axially Stacked Multiphase Flux Reversal Machine. IECON (2019)
Christoph Hittinger, Ingo Hahn
Short-Circuited Rotor Windings for Improving the Electromagnetic Saliency for Inductance- and Resistance-Based Self-Sensing Control. ISIE (2019)
Matthias Stiller, Ingo Hahn
Different Iron Loss Models for Electrical Steel Sheets considering Harmonic Flux Signals. ISIE (2019)
Andreas Lindner, Ingo Hahn
Experimental Verification of a Passively Cooled Large Air-Gap 6/8-Flux-Switching Permanent Magnet Machine Including Manufacturing. IECON (2018)
Christoph Hittinger, Ingo Hahn
Modeling of an IPMSM with short-circuited rotor winding for sensorless position estimation by FEA using the frozen permeability method. IECON (2017)
Dominik Thyroff, Ingo Hahn
Investigation on different pole configurations of an outer rotor integrated magnetic gear. IECON (2017)
Andreas Lindner, Ingo Hahn
Alternative ways of cooling an e-core flux-switching permanent magnet machine with large air-gap. IECON (2016)
Johannes Graus, Ingo Hahn
Improved accuracy of sensorless position estimation by combining resistance- and inductance-based saliency tracking. IECON (2015)
Lei Chen, Gunther Götting, Simon Dietrich, Ingo Hahn
Self-sensing control of permanent-magnet synchronous machines with multiple saliencies using pulse-voltage-injection. IAS (2015)
Dominik Thyroff, Stefan Meier, Ingo Hahn
Modeling integrated magnetic gears using a magnetic equivalent circuit. IECON (2015)
Stefan Meier, Ingo Hahn
Modeling single and double stator axial eddy current brakes considering current displacement, magnetic leakage, fringing and saturation using coupled electric and magnetic equivalent circuits. IECON (2014)
Andreas Lindner, Ingo Hahn
Simulation of a toroidal wound flux-switching permanent magnet machine. IECON (2014)
Johannes Graus, Ingo Hahn
Sensorless capability of an interior permanent magnet synchronous machine with a short-circuited rotor winding. IECON (2014)
Andreas Boehm, Ingo Hahn
Measurement of magnetic properties of steel at high temperatures. IECON (2014)
Andreas Lindner, Ingo Hahn, Andreas Boehm
A simple method for the parameter identification of the Jiles-Atherton model using only symmetric hysteresis loops. IECON (2013)