Gregory M. Shaver

Publication Activity (10 Years)

Years Active: 2003-2022
Publications (10 Years): 6

Top Topics

Controller Synthesis

Control Algorithm

Top Venues

Comput. Electron. Agric.

IEEE Trans. Veh. Technol.

Publications

Ziping Liu, Shveta Dhamankar, John T. Evans, Cody M. Allen, Chufan Jiang, Gregory M. Shaver, Aaron Etienne, Tony J. Vyn, Corwin M. Puryk, Brandon M. McDonald
Development and experimental validation of a system for agricultural grain unloading-on-the-go. Comput. Electron. Agric. 198 (2022)
Ziping Liu, Chufan Jiang, John T. Evans, Shveta Dhamankar, Logan J. Heusinger, Gregory M. Shaver, Corwin M. Puryk
A computationally efficient model for granular material piling in a container. Comput. Electron. Agric. 194 (2022)
Alexander H. Taylor, Miles J. Droege, Gregory M. Shaver, Jairo A. Sandoval, Stephen Erlien, James Kuszmaul
Capturing the Impact of Speed, Grade, and Traffic on Class 8 Truck Platooning. IEEE Trans. Veh. Technol. 69 (10) (2020)
Ana Guerrero de la Peña, Navindran Davendralingam, Ali K. Raz, Daniel DeLaurentis, Gregory M. Shaver, Vivek Sujan, Neera Jain
Modeling the Combined Effect of Powertrain Options and Autonomous Technology on Vehicle Adoption and Utilization by Line-haul Fleets. ITSC (2019)
Xing Jin, Ashish P. Vora, Vaidehi Hoshing, Tridib Saha, Gregory M. Shaver, Oleg Wasynczuk, Subbarao Varigonda
Comparison of Li-ion battery degradation models for system design and control algorithm development. ACC (2017)
Xing Jin, Ashish P. Vora, Vaidehi Hoshing, Tridib Saha, Gregory M. Shaver, Edwin R. García, Oleg Wasynczuk, Subbarao Varigonda
Physically-based reduced-order capacity loss model: SEI layer growth and active material loss for graphite anode. ACC (2017)
Bradley W. Pietrzak, Dat Le, Gregory M. Shaver
Model-based estimation of piezoelectric fuel injector parameters. ACC (2014)
Lyle E. Kocher, Daniel G. Van Alstine, Mark Magee, Gregory M. Shaver
A nonlinear model-based controller for premixed charge compression ignition combustion timing in diesel engines. ACC (2013)
Jin Shen, Neha Ruikar, Dat Le, Gregory M. Shaver
Model-based within-a-cycle estimation of rate shaping for a piezoelectric fuel injector. ACC (2013)
Dat Le, Jin Shen, Neha Ruikar, Gregory M. Shaver
Dynamic modeling of piezoelectric injector-enabled rate shaping. ACC (2013)
Daniel G. Van Alstine, Lyle E. Kocher, Ed Koeberlein, Karla Stricker, Gregory M. Shaver
Control-oriented PCCI combustion timing model for a diesel engine utilizing flexible intake valve modulation and high EGR levels. ACC (2012)
Karla Stricker, Lyle E. Kocher, Ed Koeberlein, Daniel G. Van Alstine, Gregory M. Shaver
Effective compression ratio estimation in engines with flexible intake valve actuation. ACC (2012)
Carrie M. Hall, Gregory M. Shaver, Jonathan Chauvin, Nicolas Petit
Combustion phasing model for control of a gasoline-ethanol fueled SI engine with variable valve timing. ACC (2012)
Lyle E. Kocher, Karla Stricker, Daniel G. Van Alstine, Ed Koeberlein, Gregory M. Shaver
Oxygen fraction estimation for diesel engines utilizing variable intake valve actuation. ACC (2012)
Lyle E. Kocher, Ed Koeberlein, Karla Stricker, Daniel G. Van Alstine, Brandon Biller, Gregory M. Shaver
Control-oriented modeling of diesel engine gas exchange. ACC (2011)
Chris A. Satkoski, Neha Ruikar, Scott D. Biggs, Gregory M. Shaver
Cycle-to-cycle estimation and control of multiple pulse profiles for a piezoelectric fuel injector. ACC (2011)
David B. Snyder, Gayatri H. Adi, Michael P. Bunce, Carrie M. Hall, Gregory M. Shaver
Dynamic exhaust oxygen based biodiesel blend estimation with an Extended Kalman Filter. ACC (2010)
David B. Snyder, Elena G. Washington, Armando P. Indrajuana, Gregory M. Shaver
Steady-State biodiesel blend estimation via a wideband oxygen sensor. ACC (2008)
Gregory M. Shaver, Matthew J. Roelle, J. Christian Gerdes
A two-input two-output control model of HCCI engines. ACC (2006)
Gregory M. Shaver, Matthew J. Roelle, J. Christian Gerdes
Decoupled control of combustion timing and work output in residual-affected HCCI engines. ACC (2005)
Gregory M. Shaver, J. Christian Gerdes, Matthew J. Roelle
Physics-based closed-loop control of phasing, peak pressure and work output in HCCI engines utilizing variable valve actuation. ACC (2004)
Gregory M. Shaver, J. Christian Gerdes, Parag Jain, P. A. Caton, Christopher F. Edwards
Modeling for control of HCCI engines. ACC (2003)