Tsunemoto Kuriyagawa

Publication Activity (10 Years)

Years Active: 2006-2023
Publications (10 Years): 16

Top Topics

Viewing Conditions

Top Venues

Int. J. Autom. Technol.

Publications

Chieko Kuji, Kuniyuki Izumita, Keita Shimada, Masayoshi Mizutani, Keiichi Sasaki, Tsunemoto Kuriyagawa
Influence of the Impact Angle on Machining in Powder Jet Processing. Int. J. Autom. Technol. 17 (1) (2023)
Hiroko Yamada, Kensuke Konishi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
During Sterilization of Machining Fluid. Int. J. Autom. Technol. 15 (1) (2021)
Keita Shimada, Ziqi Chen, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Ultrasonic-Assisted Face Milling for Fabricating Hierarchical Microstructures. Int. J. Autom. Technol. 14 (2) (2020)
Shuhei Kodama, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Effects of Pulse Duration and Heat on Laser-Induced Periodic Surface Structures. Int. J. Autom. Technol. 14 (4) (2020)
Shinji Ishibashi, Keita Shimada, Hiroyasu Kanetaka, Masaki Tsukuda, Takumi Mizoi, Masataka Chuzenji, Shoichi Kikuchi, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Porosity and Tensile Properties of Rhizoid Porous Structure Fabricated Using Selective Laser Melting. Int. J. Autom. Technol. 14 (4) (2020)
Tsunemoto Kuriyagawa, Masayoshi Mizutani
Editorial: Laser-Based/Assisted Manufacturing. Int. J. Autom. Technol. 14 (4) (2020)
Ryohei Takase, Shuhei Kodama, Keita Shimada, Holger Mescheder, Kai Winands, Jan Riepe, Kristian Arntz, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Study on the Creation of Fine Periodic Structure on V-Shaped Groove with Short-Pulsed Laser. Int. J. Autom. Technol. 14 (4) (2020)
Keita Shimada, Takuya Hirai, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Unidirectional Wetting Surfaces Fabricated by Ultrasonic-Assisted Cutting. Int. J. Autom. Technol. 13 (2) (2019)
Yue Sun, Shaolin Xu, Tomoki Kyoizumi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
CFD Analysis of Friction-Reduction Effect of Micro-Textured Surfaces in Lubricant. Int. J. Autom. Technol. 12 (2) (2018)
Yue Sun, Keita Shimada, Shaolin Xu, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Friction Reduction by Micro-Textured Surfaces in Lubrication. Int. J. Autom. Technol. 12 (4) (2018)
Shuhei Kodama, Shinya Suzuki, Akihiro Shibata, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Effect of Crystal Structure on Fabrication of Fine Periodic Surface Structures with Short Pulsed Laser. Int. J. Autom. Technol. 12 (6) (2018)
Masayoshi Mizutani, Tsunemoto Kuriyagawa
Editorial: Biomedical Applications. Int. J. Autom. Technol. 11 (6) (2017)
Nobuyuki Sumi, Chihiro Kato, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Influence of Workpiece Materials on the Characteristics of the Layers by Electrical Discharge Coating. Int. J. Autom. Technol. 10 (5) (2016)
Shuhei Kodama, Akihiro Shibata, Shinya Suzuki, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Fabrication and Control of Fine Periodic Surface Structures by Short Pulsed Laser. Int. J. Autom. Technol. 10 (4) (2016)
Shaolin Xu, Shinsaku Osawa, Ryuichi Kobayashi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Minimizing Burrs and Defects on Microstructures with Laser Assisted Micromachining Technology. Int. J. Autom. Technol. 10 (6) (2016)
Sergey Bolotov, Ryuichi Kobayashi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Fabrication of Precision Micrograting on Resin Substrate Utilizing Ultrasonic-Assisted Molding. Int. J. Autom. Technol. 9 (1) (2015)
Keita Shimada, Chung-I Kuo, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Statistical Analysis for Evaluating Surface Roughness of Plane Honing. Int. J. Autom. Technol. 8 (4) (2014)
Jingsi Wang, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Using Smoothed Particle Hydrodynamics to Examine Influence of Process Parameters on Ultrasonic Machining. Int. J. Autom. Technol. 8 (6) (2014)
Ryuichi Kobayashi, Tianfeng Zhou, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Ultraprecision Glass Molding Press for Microgrooves with Different Pitch Sizes. Int. J. Autom. Technol. 7 (6) (2013)
Satoshi Kobayashi, Keita Shimada, Chikashi Murakoshi, Kazunori Koike, Masayuki Takahashi, Toru Tachibana, Tsunemoto Kuriyagawa
Development of an Ultrasonically-Assisted Electrolytic Grinding System. Int. J. Autom. Technol. 7 (6) (2013)
Chihiro Nishikawa, Naohide Mizukuchi, Akihiko Tomie, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Characteristics of Thick Film Deposition in Powder Jet Machining. Int. J. Autom. Technol. 7 (6) (2013)
Jingsi Wang, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Material Removal During Ultrasonic Machining Using Smoothed Particle Hydrodynamics. Int. J. Autom. Technol. 7 (6) (2013)
Pay Jun Liew, Keita Shimada, Masayoshi Mizutani, Jiwang Yan, Tsunemoto Kuriyagawa
Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining. Int. J. Autom. Technol. 7 (6) (2013)
Takayuki Azuma, Ryo Ito, Shinji Soma, Shinji Murakami, Tsunemoto Kuriyagawa
Development of Non-Destructive Technology for Detecting Grinding Burns. Int. J. Autom. Technol. 7 (6) (2013)
Jiwang Yan, Zhiyu Zhang, Tsunemoto Kuriyagawa
Effect of Nanoparticle Lubrication in Diamond Turning of Reaction-Bonded SiC. Int. J. Autom. Technol. 5 (3) (2011)
Keita Shimada, Nobuhito Yoshihara, Jiwang Yan, Tsunemoto Kuriyagawa, Yuichiro Sueishi, Hideshi Tezuka
Ultrasonic-Assisted Grinding of Ultra-High Purity SUS 316L. Int. J. Autom. Technol. 5 (3) (2011)
Tsuyoshi Kaku, Tsunemoto Kuriyagawa, Nobuhito Yoshihara
Electrorheological fluid-assisted polishing of WC micro aspherical glass moulding dies. Int. J. Manuf. Technol. Manag. 9 (1/2) (2006)
Nobuhito Yoshihara, Tsunemoto Kuriyagawa, Hiromichi Ono, Katsuo Syoji
Nano-topography on axisymmetric aspherical ground surfaces. Int. J. Manuf. Technol. Manag. 9 (1/2) (2006)