Koichi Morishige

Publication Activity (10 Years)

Years Active: 1997-2022
Publications (10 Years): 3

Top Topics

Industrial Robots

Deformable Objects

Top Venues

Int. J. Autom. Technol.

Publications

Kei Moriguchi, Takuya Mizokami, Koichi Morishige
Generation of a Robot Program and Determination of an Optimal Workpiece Placement Considering the Manipulability of Industrial Robots. Int. J. Autom. Technol. 16 (6) (2022)
Tomonobu Suzuki, Ken Okamoto, Koichi Morishige
Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surfaces Using a Barrel Tool Considering Continuity of Tool Postures. Int. J. Autom. Technol. 15 (6) (2021)
Koichi Morishige, Satoshi Mori
Tool Path Generation for 5-Axis Rough Cutting Using Haptic Device. Int. J. Autom. Technol. 14 (5) (2020)
Raiyo Oka, Koichi Morishige
Development of Turning Machine Operation Interface that Uses Haptic Device. Int. J. Autom. Technol. 8 (3) (2014)
Koichi Morishige, Masahiro Anzai, Hiroyuki Narahara
Editorial: Rapid Prototyping. Int. J. Autom. Technol. 6 (5) (2012)
Tomoyuki Kanda, Koichi Morishige
Tool Path Generation for Five-Axis Controlled Machining with Consideration of Structural Interference. Int. J. Autom. Technol. 6 (6) (2012)
Koichi Morishige, Makoto Kaneko
Tool Path Generation for Five-Axis Controlled Machining with Consideration of Motion of Two Rotational Axes. Int. J. Autom. Technol. 5 (3) (2011)
Tomoya Ito, Koichi Morishige
Polishing Process Automation by Industrial Robots with Polished Surface Quality Judged Based on Imaging Processing. Int. J. Autom. Technol. 3 (2) (2009)
Koichi Morishige
Editorial: Dies and Molds. Int. J. Autom. Technol. 2 (6) (2008)
Hiroyuki Narahara, Koichi Morishige
Editorial: Rapid Prototying. Int. J. Autom. Technol. 2 (3) (2008)
Koichi Morishige, Shingo Ishizuka, Yoshimi Takeuchi
Development of Tool Fabrication CAD/CAM for Conicoid End Mill. Int. J. Autom. Technol. 1 (2) (2007)
Koichi Morishige, Teruhisa Nasu, Yoshimi Takeuchi
Five-Axis Control Sculptured Surface Machining Using Conicoid End Mill. SSM (1998)
Koichi Morishige, Yoshimi Takeuchi
5-axis control rough cutting of an impeller with efficiency and accuracy. ICRA (1997)