José Antonio Sánchez

Publication Activity (10 Years)

Years Active: 1998-2024
Publications (10 Years): 10

Top Topics

Traffic Conditions

Recurrent Neural Networks

Acoustic Emission

Specular Reflection

Top Venues

Neural Comput. Appl.

Int. J. Comput. Integr. Manuf.

Publications

Iñigo Pombo, José Antonio Sánchez, Einar Martin, Leire Godino, Jorge Álvarez
Accurate Measurement of Temperatures in Industrial Grinding Operations with Steep Gradients. Sensors 24 (6) (2024)
José Antonio Sánchez, David Melendi, Roberto García, Xabiel G. Pañeda, Víctor Corcoba Magaña, Dan García-Carrillo
Distributed and collaborative system to improve traffic conditions using fuzzy logic and V2X communications. Veh. Commun. 47 (2024)
Leire Godino, Arkaitz Muñoz, Iñigo Pombo, José Antonio Sánchez, David Barrenetxea
In-machine data acquisition for evaluating the conditioning efficiency of resin-bonded super-abrasive grinding wheels. Int. J. Comput. Integr. Manuf. 36 (3) (2023)
D. González, Jorge Álvarez, José Antonio Sánchez, Leire Godino, Iñigo Pombo
Deep Learning-Based Feature Extraction of Acoustic Emission Signals for Monitoring Wear of Grinding Wheels. Sensors 22 (18) (2022)
Iñigo Pombo, Leire Godino, José Antonio Sánchez, Rafael Lizarralde
Expectations and limitations of Cyber-Physical Systems (CPS) for Advanced Manufacturing: A View from the Grinding Industry. Future Internet 12 (9) (2020)
Lander Urgoiti, David Barrenetxea, José Antonio Sánchez, Iñigo Pombo, Jorge Álvarez
On the Influence of Infra-Red Sensor in the Accurate Estimation of Grinding Temperatures. Sensors 18 (12) (2018)
Ander Arriandiaga, Eva Portillo, José Antonio Sánchez, Itziar Cabanes, Asier Zubizarreta
Downsizing training data with weighted FCM for predicting the evolution of specific grinding energy with RNNs. Appl. Soft Comput. 61 (2017)
Ander Arriandiaga, Eva Portillo, José Antonio Sánchez, Itziar Cabanes, Asier Zubizarreta
Recurrent ANN-based modelling of the dynamic evolution of the surface roughness in grinding. Neural Comput. Appl. 28 (6) (2017)
Ander Arriandiaga, Eva Portillo, José Antonio Sánchez, Itziar Cabanes, Iñigo Pombo
A new approach for dynamic modelling of energy consumption in the grinding process using recurrent neural networks. Neural Comput. Appl. 27 (6) (2016)
Ander Arriandiaga, Eva Portillo, José Antonio Sánchez, Itziar Cabanes
On-line Surface Roughness Prediction in Grinding Using Recurrent Neural Networks. EANN (2015)
Ander Arriandiaga, Eva Portillo, José Antonio Sánchez, Itziar Cabanes, Iñigo Pombo
Virtual Sensors for On-line Wheel Wear and Part Roughness Measurement in the Grinding Process. Sensors 14 (5) (2014)
Eva Portillo, Itziar Cabanes, José Antonio Sánchez, Dario Orive, Naiara Ortega, Marga Marcos
A computer assistant for monitoring tool performance during the drilling process. Int. J. Comput. Integr. Manuf. 25 (9) (2012)
Eva Portillo, Itziar Cabanes, José Antonio Sánchez, Dario Orive, Naiara Ortega, Marga Marcos
A Case Study of a Flexible Software Tool in the Drilling Process. CESCIT (2012)
José Antonio Sánchez, Borja Izquierdo, Naiara Ortega, Iñigo Pombo, Soraya Plaza, Itziar Cabanes
Computer simulation of performance of electrical discharge machining operations. Int. J. Comput. Integr. Manuf. 22 (8) (2009)
Eva Portillo, Marga Marcos, Itziar Cabanes, Asier Zubizarreta, José Antonio Sánchez
Artificial Neural Networks for detecting instability trends in different workpiece thicknesses in a machining process. ACC (2008)
Iñigo Pombo, José Antonio Sánchez, R. Alberdi, R. Gonzalez
Design, manufacture and industrial validation of an electro discharge dresser for metal bond CBN wheels. Int. J. Manuf. Technol. Manag. 15 (2) (2008)
Eva Portillo, Itziar Cabanes, Marga Marcos, Dario Orive, José Antonio Sánchez
Design of a Virtual-Instrumentation System for a Machining Process. IEEE Trans. Instrum. Meas. 56 (6) (2007)
José Antonio Sánchez, S. Plaza, Luis Norberto López de Lacalle, Aitzol Lamikiz
Computer simulation of wire-EDM taper-cutting. Int. J. Comput. Integr. Manuf. 19 (7) (2006)
Luis Norberto López de Lacalle, Aitzol Lamikiz, José Antonio Sánchez, Igor Fernández de Bustos
Simultaneous measurement of forces and machine tool position for diagnostic of machining tests. IEEE Trans. Instrum. Meas. 54 (6) (2005)
Aitzol Lamikiz, Luis Norberto López de Lacalle, José Antonio Sánchez, M. A. Salgado
Cutting force integration at the CAM stage in the high-speed milling of complex surfaces. Int. J. Comput. Integr. Manuf. 18 (7) (2005)
José Antonio Sánchez, Luis Norberto López de Lacalle, Aitzol Lamikiz
A computer-aided system for the optimization of the accuracy of the wire electro-discharge machining process. Int. J. Comput. Integr. Manuf. 17 (5) (2004)
Nelson Juan Cañizares, Raúl Díaz, Luis Armando Gurris, José Antonio Sánchez, Israel Pear, Rubén Quintero, Emilio Soto, Héctor Hernández, Ricardo Morales, Rom'n Lannes, Oscar Rodriguez, Ileana Díaz, Lourdes Obrador
Microcomputer Decision Support System for Intensive Care. MedInfo (1998)