Hsi-Yung Feng

Publication Activity (10 Years)

Years Active: 2002-2023
Publications (10 Years): 20

Top Topics

Laplace Beltrami

Modeling Method

Top Venues

Comput. Aided Des.

J. Comput. Des. Eng.

Publications

Qiang Zou, Hsi-Yung Feng, Shuming Gao
Variational Direct Modeling: A framework towards integration of parametric modeling and direct modeling in CAD. CoRR (2023)
Qiang Zou, Hsi-Yung Feng, Shuming Gao
Variational Direct Modeling: A Framework Towards Integration of Parametric Modeling and Direct Modeling in CAD. Comput. Aided Des. 157 (2023)
Zhihong Tang, Qiang Zou, Hsi-Yung Feng, Shuming Gao, Chenchu Zhou, Yusheng Liu
A review on geometric constraint solving. CoRR (2022)
Qiang Zou, Hsi-Yung Feng
A robust direct modeling method for quadric B-rep models based on geometry-topology inconsistency tracking. Eng. Comput. 38 (4) (2022)
Jimin Joy, Hsi-Yung Feng
Fast update of sliced voxel workpiece models using partitioned swept volumes of three-axis linear tool paths. Eng. Comput. 36 (3) (2020)
Qiang Zou, Hsi-Yung Feng
A decision-support method for information inconsistency resolution in direct modeling of CAD models. Adv. Eng. Informatics 44 (2020)
Qiang Zou, Charlie C. L. Wang, Hsi-Yung Feng
Length-optimal tool path planning for freeform surfaces with preferred feed directions. CoRR (2020)
Qiang Zou, Hsi-Yung Feng
Variational B-rep Model Analysis for Direct Modeling using Geometric Perturbation. CoRR (2019)
Qiang Zou, Hsi-Yung Feng
On Limitations of the Witness Configuration Method for Geometric Constraint Solving in CAD Modeling. CoRR (2019)
Qiang Zou, Hsi-Yung Feng
A decision-support method for information inconsistency resolution in direct modeling of CAD models. CoRR (2019)
Qiang Zou, Hsi-Yung Feng
Push-pull direct CAD modeling with movable neighboring faces for preserving G^1 connections. CoRR (2019)
Qiang Zou, Hsi-Yung Feng
Variational B-rep model analysis for direct modeling using geometric perturbation. J. Comput. Des. Eng. 6 (4) (2019)
Qiang Zou, Hsi-Yung Feng
Push-pull direct modeling of solid CAD models. Adv. Eng. Softw. 127 (2019)
Qiang Zou, Hsi-Yung Feng
Push-pull direct modeling of solid CAD models. CoRR (2018)
Farbod Khameneifar, Hsi-Yung Feng
Establishing a balanced neighborhood of discrete points for local quadric surface fitting. Comput. Aided Des. 84 (2017)
Farbod Khameneifar, Hsi-Yung Feng
Extracting sectional contours from scanned point clouds via adaptive surface projection. Int. J. Prod. Res. 55 (15) (2017)
Jimin Joy, Hsi-Yung Feng
Frame-sliced voxel representation: An accurate and memory-efficient modeling method for workpiece geometry in machining simulation. Comput. Aided Des. 88 (2017)
Xun Gong, Hsi-Yung Feng
Cutter-workpiece engagement determination for general milling using triangle mesh modeling. J. Comput. Des. Eng. 3 (2) (2016)
Yutao Wang, Hsi-Yung Feng
Outlier detection for scanned point clouds using majority voting. Comput. Aided Des. 62 (2015)
Guillermo H. Kumazawa, Hsi-Yung Feng, M. Javad Barakchi Fard
Preferred feed direction field: A new tool path generation method for efficient sculptured surface machining. Comput. Aided Des. (2015)
Hsi-Yung Feng, Dawit H. Endrias, M. Abu Taher, Hao Song
An accurate and efficient algorithm for determining minimum circumscribed circles and spheres from discrete data points. Comput. Aided Des. 45 (2) (2013)
Yutao Wang, Hsi-Yung Feng, Félix-Étienne Delorme, Serafettin Engin
An adaptive normal estimation method for scanned point clouds with sharp features. Comput. Aided Des. 45 (11) (2013)
Avisekh Banerjee, Hsi-Yung Feng, Evgueni V. Bordatchev
Process planning for Floor machining of 2½D pockets based on a morphed spiral tool path pattern. Comput. Ind. Eng. 63 (4) (2012)
Daoshan OuYang, Hsi-Yung Feng
Reconstruction of 2D polygonal curves and 3D triangular surfaces via clustering of Delaunay circles/spheres. Comput. Aided Des. 43 (8) (2011)
Lihui Wang, Ji Ma, Hsi-Yung Feng
Web-DPP: towards job-shop machining process planning and monitoring. Int. J. Manuf. Res. 6 (4) (2011)
Lihui Wang, Shadi Keshavarzmanesh, Hsi-Yung Feng
A hybrid approach for dynamic assembly shop floor layout. CASE (2010)
Ji Ma, Hsi-Yung Feng, Lihui Wang
Delaunay-based triangular surface reconstruction from points via Umbrella Facet Matching. CASE (2010)
Lihui Wang, Ningxu Cai, Hsi-Yung Feng, Ji Ma
ASP: An Adaptive Setup Planning Approach for Dynamic Machine Assignments. IEEE Trans Autom. Sci. Eng. 7 (1) (2010)
Shadi Keshavarzmanesh, Lihui Wang, Hsi-Yung Feng
Design and simulation of an adaptive and collaborative assembly cell. Int. J. Manuf. Res. 5 (1) (2010)
Lihui Wang, Ningxu Cai, Hsi-Yung Feng
Function blocks enabled dynamic set-up dispatching and execution monitoring. Int. J. Comput. Integr. Manuf. 22 (1) (2009)
Hao Song, Hsi-Yung Feng, Daoshan OuYang
Automatic Detection of Tangential Discontinuities in Point Cloud Data. J. Comput. Inf. Sci. Eng. 8 (2) (2008)
Lihui Wang, Ji Ma, Hsi-Yung Feng
An adaptive and optimal setup planning system. CASE (2008)
Hao Song, Hsi-Yung Feng
A global clustering approach to point cloud simplification with a specified data reduction ratio. Comput. Aided Des. 40 (3) (2008)
Hao Song, Hsi-Yung Feng
Point-cloud simplification with bounded geometric deviations. Int. J. Comput. Appl. Technol. 30 (4) (2007)
Lihui Wang, W. Jin, Hsi-Yung Feng
Embedding machining features in function blocks for distributed process planning. Int. J. Comput. Integr. Manuf. 19 (5) (2006)
Qimi Jiang, Hsi-Yung Feng
Batch Roundness Characterization and Evaluation. BASYS (2006)
Hao Song, Hsi-Yung Feng
A Point Cloud Simplification Algorithm for Mechanical Part Inspection. BASYS (2006)
O. Remus Tutunea-Fatan, Hsi-Yung Feng
On the B-spline interpolated tool trajectories for five-axis sculptured surface machining. Int. J. Manuf. Res. 1 (2) (2006)
Daoshan OuYang, Hsi-Yung Feng
On the normal vector estimation for point cloud data from smooth surfaces. Comput. Aided Des. 37 (10) (2005)
Hsi-Yung Feng, Zhengji Teng
Iso-planar piecewise linear NC tool path generation from discrete measured data points. Comput. Aided Des. 37 (1) (2005)
Dawit H. Endrias, Hsi-Yung Feng
Minimum-Zone Form Tolerance Evaluation Using Rigid-Body Coordinate Transformation. J. Comput. Inf. Sci. Eng. 3 (1) (2003)
Hsi-Yung Feng, Huiwen Li
Constant scallop-height tool path generation for three-axis sculptured surface machining. Comput. Aided Des. 34 (9) (2002)