Giovanni Betta

Publication Activity (10 Years)

Years Active: 1998-2024
Publications (10 Years): 22

Top Topics

Electromagnetic Fields

Preliminary Analysis

Defect Classification

Top Venues

IEEE Trans. Instrum. Meas.

Publications

Lewis Manning, Martin J. Salter, Martin Wickham, Ana Robador, Osman Sibonjic, Sani Sarcevic, Semir Cohodarevic, Giovanni Betta, Domenico Capriglione, Gianfranco Miele
S-Parameter Analysis of Age Testing Effects on FR4-Based Printed Circuit Boards up to 10 GHz. M&N (2024)
Luca Tari, Giovanni Betta, Luigi Ferrigno, Antonello Monti, Ferdinanda Ponci
The Impact of Energy Measurement in Fault Detection: A Preliminary Analysis of Load Profiling Capability. I2MTC (2024)
Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Sangin Qahtan Wali, M. Ruttner, Aduwati Sali, Darko Suka
Human exposure to 5G systems: experimental analysis and measurement issues in FR1 and FR2 operating bands. I2MTC (2023)
Gabriele Patrizi, Marcantonio Catelani, Lorenzo Ciani, Marco Carratù, Antonio Pietrosanto, Paolo Sommella, Giovanni Betta, Domenico Capriglione
Temperature stress tests on low-cost IMU systems: Analysis and first proposal for enhancing performance. I2MTC (2022)
Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Marco Donald Migliore, Darko Suka
Experimental analysis of 5G pilot signals' variability in urban scenarios. M&N (2022)
Giovanni Betta, Domenico Capriglione, Marco Carratù, Marcantonio Catelani, Lorenzo Ciani, Gabriele Patrizi, Antonio Pietrosanto, Paolo Sommella
Stress Testing for Performance Analysis of Orientation Estimation Algorithms. IEEE Trans. Instrum. Meas. 71 (2022)
Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Marco Donald Migliore, Darko Suka
5G DSS communications: pilot signals' variability analysis from measurements on the field. I2MTC (2022)
Rocco Cancelliere, Laura Micheli, Elisabetta Suffredini, Stefano Bellucci, Giovanni Betta, Luigi Ferrigno, Antonio Maffucci, Gianfranco Miele
Coronavirus Label-Free Immunosensor: Preliminary Results. AISEM (2022)
Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Marzia Salone D'Amata
Human Exposure to 4G LTE Systems: Enhancing the Reliability of EMF Extrapolation Techniques Based on Spectrum Analyzer Measurements. IEEE Trans. Instrum. Meas. 70 (2021)
Andrea Bernieri, Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Marzia Salone D'Amata
LTE Human Exposure Evaluation: Maximum RF Field Strength Extrapolation Technique Repeatability Analysis. IEEE Trans. Instrum. Meas. 70 (2021)
Giovanni Betta, Domenico Capriglione, Marzia Salone D'Amata, Consolatina Liguori, Emanuele Zappa
Characterization of 3D Image-Based Biometric Systems in Dynamic Acquisition Conditions. I2MTC (2021)
Giovanni Betta, Domenico Capriglione, Gianfranco Miele, Marco Donald Migliore, Marzia Salone D'Amata, Gianni Cerro
Repeatability analysis of decoder-based EMF exposure measurements in LTE cellular systems. I2MTC (2021)
Giovanni Betta, Gianni Cerro, Gianfranco Miele, Marzia Salone D'Amata, Domenico Capriglione
On the Reliability of Extrapolation Techniques for Verifying the Compliance of LTE Cellular Systems with RF Human Exposure Limits. I2MTC (2020)
Giovanni Betta, Domenico Capriglione, Gianni Cerro, Gianfranco Miele, Marzia Salone D'Amata, Darko Suka, Predrag V. Pejovic, Mirjana Simic-Pejovic
On the Measurement of Human Exposure to Cellular Networks. IEEE Instrum. Meas. Mag. 23 (9) (2020)
Andrea Bernieri, Giovanni Betta, Gianni Cerro, Gianfranco Miele, Domenico Capriglione
Experimental Comparison of Extrapolation Techniques for 24-Hours Electromagnetic Fields Human Exposure Evaluation to UMTS and LTE Base Stations. M&N (2019)
Giovanni Betta, Gianni Cerro, Marco Ferdinandi, Luigi Ferrigno, Mario Molinara
Contaminants detection and classification through a customized IoT-based platform: A case study. IEEE Instrum. Meas. Mag. 22 (6) (2019)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
ECT probe improvement for in-service non-destructive testing on conductive materials. I2MTC (2018)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
Characterization of a TMR Sensor for EC-NDT Applications. Sensors (2018)
Gianni D'Angelo, Marco Laracca, Salvatore Rampone, Giovanni Betta
Fast Eddy Current Testing Defect Classification Using Lissajous Figures. IEEE Trans. Instrum. Meas. 67 (4) (2018)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
Improvement of the Frequency Behavior of an EC-NDT Inspection System. Sensors (2018)
Giovanni Betta, Domenico Capriglione, Mariella Corvino, Consolatina Liguori, Paolo Sommella
Sensitivity analysis of influence quantities on signal-to-noise ratio in face-based recognition systems. I2MTC (2017)
Giovanni Betta, Domenico Capriglione, Luigi Ferrigno, Antonio Rasile
Improving the Performance of an AMR-Based Current Transducer for Metering Applications. Sensors (2016)
Giovanni Betta, Domenico Capriglione, Mariella Corvino, Consolatina Liguori, Alfredo Paolillo
A Proposal for the Management of the Measurement Uncertainty in Classification and Recognition Problems. IEEE Trans. Instrum. Meas. 64 (2) (2015)
Giovanni Betta, Domenico Capriglione, Michele Gasparetto, Emanuele Zappa, Consolatina Liguori, Alfredo Paolillo
Managing the uncertainty for face classification with 3D features. I2MTC (2014)
Orsola Petrella, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta, Marco Laracca
An Experimental Setup for the Calibration of Acoustic Antenna. IEEE Trans. Instrum. Meas. 63 (5) (2014)
Leopoldo Angrisani, Giovanni Betta, Domenico Capriglione, Gianni Cerro, Luigi Ferrigno, Gianfranco Miele
Proposal and analysis of new algorithms for wideband spectrum sensing in cognitive radio. I2MTC (2014)
Giovanni Betta, Luigi Ferrigno, Marco Laracca, Pietro Burrascano, Marco Ricci
Optimized complex signals for Eddy Current Testing. I2MTC (2014)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Stefano Mastrostefano
Multifrequency Excitation and Support Vector Machine Regressor for ECT Defect Characterization. IEEE Trans. Instrum. Meas. 63 (5) (2014)
Orsola Petrella, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta, Marco Laracca
Modelling, parametric analysis, and optimization of an experimental set-up for acoustic antenna calibration. I2MTC (2013)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
Crack Depth Estimation by Using a Multi-Frequency ECT Method. IEEE Trans. Instrum. Meas. 62 (3) (2013)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
A novel biaxial probe implementing multifrequency excitation and SVM processing for NDT. I2MTC (2013)
Giovanni Betta, Luigi Ferrigno, Marco Laracca
Cost-Effective FPGA Instrument for Harmonic and Interharmonic Monitoring. IEEE Trans. Instrum. Meas. 62 (8) (2013)
Giovanni Betta, Domenico Capriglione, Mariella Corvino, Consolatina Liguori, Alfredo Paolillo
Face based recognition algorithms: The use of uncertainty in the classification. I2MTC (2013)
Giovanni Betta, Domenico Capriglione, Mariella Corvino, Consolatina Liguori, Alfredo Paolillo
Face Based Recognition Algorithms: A First Step Toward a Metrological Characterization. IEEE Trans. Instrum. Meas. 62 (5) (2013)
Giovanni Betta, Luigi Ferrigno, Marco Laracca
GMR-Based ECT Instrument for Detection and Characterization of Crack on a Planar Specimen: A Hand-Held Solution. IEEE Trans. Instrum. Meas. 61 (2) (2012)
Giovanni Betta, Domenico Capriglione, Carlo F. M. Carobbi, Marco Donald Migliore
The accurate calibration of EMC antennas in compact chambers - Measurements and uncertainty evaluations. Comput. Stand. Interfaces 33 (2) (2011)
Giovanni Betta, Domenico Capriglione, Luigi Ferrigno, Gianfranco Miele
Influence of Wi-Fi Computer Interfaces on Measurement Apparatuses. IEEE Trans. Instrum. Meas. 59 (12) (2010)
Giovanni Betta, Domenico Capriglione, Antonio Pietrosanto, Paolo Sommella
A Methodology to Test Instrument Software: An Automotive Diagnostic System Application. IEEE Trans. Instrum. Meas. 57 (12) (2008)
Giovanni Betta, Domenico Capriglione, Antonio Pietrosanto, Paolo Sommella
A Statistical Approach for Improving the Performance of a Testing Methodology for Measurement Software. IEEE Trans. Instrum. Meas. 57 (6) (2008)
Giovanni Betta, Domenico Capriglione, Luigi Ferrigno, Gianfranco Miele
Experimental Investigation of the Electromagnetic Interference of ZigBee Transmitters on Measurement Instruments. IEEE Trans. Instrum. Meas. 57 (10) (2008)
Giovanni Betta, Domenico Capriglione, Luigi Ferrigno, Gianfranco Miele
Influence of Wi-Fi computer interfaces on RF measurement systems. VECIMS (2007)
Giovanni Betta, Domenico Capriglione, Marco Laracca
Reproducibility and Uncertainty of Conducted Emission Measurements for Adjustable-Speed Electrical Power Drive Characterization. IEEE Trans. Instrum. Meas. 55 (5) (2006)
Giovanni Betta, Andrea Bernieri, Domenico Capriglione, Mario Molinara
SVM-based approach for instrument fault accomodation in automotive systems. VECIMS (2005)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
An automated self-calibrated instrument for nondestructive testing on conductive materials. IEEE Trans. Instrum. Meas. 53 (4) (2004)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
A biaxial probe for nondestructive testing on conductive materials. IEEE Trans. Instrum. Meas. 53 (3) (2004)
Giovanni Betta, Domenico Capriglione, G. Tomasso Tomasso
Evaluation of the measurement uncertainties in the conducted emissions from adjustable speed electrical power drive systems. IEEE Trans. Instrum. Meas. 53 (4) (2004)
Giovanni Betta, Consolatina Liguori, Antonio Pietrosanto
Uncertainty evaluation in algorithms with conditional statement. IEEE Trans. Instrum. Meas. 53 (4) (2004)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno
Improving nondestructive testing probe performance by digital processing techniques. IEEE Trans. Instrum. Meas. 52 (3) (2003)
Giovanni Betta, Consolatina Liguori, Alfredo Paolillo, Antonio Pietrosanto
A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis. IEEE Trans. Instrum. Meas. 51 (6) (2002)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno
Characterization of an eddy-current-based system for nondestructive testing. IEEE Trans. Instrum. Meas. 51 (2) (2002)
Giovanni Betta, Antonio Pietrosanto, Antonio Scaglione
An enhanced fiber-optic temperature sensor system for power transformer monitoring. IEEE Trans. Instrum. Meas. 50 (5) (2001)
Giovanni Betta, Consolatina Liguori, Antonio Pietrosanto
A multi-application FFT analyzer based on a DSP architecture. IEEE Trans. Instrum. Meas. 50 (3) (2001)
Giovanni Betta, Antonio Pietrosanto
An intrinsic fiber optic temperature sensor. IEEE Trans. Instrum. Meas. 49 (1) (2000)
Giovanni Betta, Antonio Pietrosanto
Instrument fault detection and isolation: state of the art and new research trends. IEEE Trans. Instrum. Meas. 49 (1) (2000)
Andrea Bernieri, Giovanni Betta, Guglielmo Rubinacci, Fabio Villone
A measurement system based on magnetic sensors for nondestructive testing. IEEE Trans. Instrum. Meas. 49 (2) (2000)
Giovanni Betta, Antonio Pietrosanto, Antonio Scaglione
Temperature measurement by multifiber optical sensor. IEEE Trans. Instrum. Meas. 49 (5) (2000)
Giovanni Betta, Consolatina Liguori, Antonio Pietrosanto
Comparison between IFDI schemes based on expert systems and neural networks. IEEE Trans. Instrum. Meas. 47 (5) (1998)
Giovanni Betta, Massimo D'Apuzzo, Consolatina Liguori, Antonio Pietrosanto
An intelligent FFT-analyzer. IEEE Trans. Instrum. Meas. 47 (5) (1998)
Giovanni Betta, Antonio Pietrosanto, Antonio Scaglione
A Gray-code-based fiber optic liquid level transducer. IEEE Trans. Instrum. Meas. 47 (1) (1998)
Giovanni Betta, Antonio Pietrosanto, Antonio Scaglione
Microcontroller-based performance enhancement of an optical fiber level transducer. IEEE Trans. Instrum. Meas. 47 (2) (1998)
Giovanni Betta, Consolatina Liguori, Antonio Pietrosanto
An advanced neural-network-based instrument fault detection and isolation scheme. IEEE Trans. Instrum. Meas. 47 (2) (1998)