Marco Laracca

Publication Activity (10 Years)

Years Active: 2004-2024
Publications (10 Years): 29

Top Topics

Calibration Method

Indoor Localization

Top Venues

IEEE Trans. Instrum. Meas.

MetroAutomotive

Publications

Federico Carere, Alessandro Sardellitti, Andrea Bernieri, Luigi Ferrigno, Silvia Sangiovanni, Marco Laracca
An Eddy Current Probe for the Detection of Subsuperficial Defects of Any Orientation. IEEE Trans. Instrum. Meas. 73 (2024)
Alessandro Sardellitti, Vincenzo Mottola, Filippo Milano, Luigi Ferrigno, Antonello Tamburrino, Marco Laracca
Multi-Parameter Estimation by combining Dimensional Analysis and Eddy Current Testing. MetroInd4.0 & IoT (2024)
Federico Carere, Marco Laracca, Davide Saccavini, Silvia Sangiovanni
A Method to Design Open Loop Current Transducers for Busbar Applications. I2MTC (2024)
Babar Ali, Umar Farooq, Marco Laracca, Hossein Cheraghi Bidsorkhi, Alessandro Gioseppe D'Aloia, Maria Sabrina Sarto
Performance Enhancement of Graphene-Based Biopotential Electrodes through Electrical Contact Geometry Optimization. M&N (2024)
Filippo Milano, Helbert da Rocha, Marco Laracca, Luigi Ferrigno, António Espírito-Santo, José A. C. Salvado, Vincenzo Paciello
BLE-Based Indoor Localization: Analysis of Some Solutions for Performance Improvement. Sensors 24 (2) (2024)
Carmine Bourelly, Filippo Milano, Luigi Ferrigno, Marco Laracca, Gui Yun Tian
Novel Approach for Battery State of Charge Evaluation through Inductive Sensing. I2MTC (2024)
Tommaso Bragatto, Federico Carere, Alberto Geri, Marco Laracca, Parastou Poursoltan, Silvia Sangiovanni
Assessing Impact of Uncertainty on a Decision Support System for Flexibility Exploitation in a Distribution Network. I2MTC (2024)
Marco Laracca, Gianfranco Miele, Luca Podestà, Silvia Sangiovanni
A Non-Invasive Technique for Long-Term Monitoring of Gastroesophageal Reflux - A Pilot Study. Sensors 23 (23) (2023)
Alessandro Sardellitti, Filippo Milano, Marco Laracca, Salvatore Ventre, Luigi Ferrigno, Antonello Tamburrino
An Eddy-Current Testing Method for Measuring the Thickness of Metallic Plates. IEEE Trans. Instrum. Meas. 72 (2023)
Andrea Bernieri, G. Iannitti, Marco Laracca, Gianfranco Miele, Silvia Sangiovanni
A test bed for in-laboratory calibration of optical-based speedometers. I2MTC (2023)
Filippo Milano, Giulia Di Capua, Nunzio Oliva, Francesco Porpora, Carmine Bourelly, Luigi Ferrigno, Marco Laracca
An Analytical Model for Lithium-Ion Batteries Based on Genetic Programming Approach. MetroAutomotive (2023)
Gianni Cerro, Luigi Ferrigno, Marco Laracca, Gianfranco Miele, Filippo Milano, Valentina Pingerna
UWB-Based Indoor Localization: How to Optimally Design the Operating Setup? IEEE Trans. Instrum. Meas. 71 (2022)
Alessandro Sardellitti, Giulia Di Capua, Marco Laracca, Antonello Tamburrino, Salvatore Ventre, Luigi Ferrigno
A Fast ECT Measurement Method for the Thickness of Metallic Plates. IEEE Trans. Instrum. Meas. 71 (2022)
Andrea Bernieri, Gianni Cerro, Luigi Ferrigno, Marco Laracca, Filippo Milano
Use of Magnetic Positioning Systems in Industrial and Biomedical Applications. IEEE Instrum. Meas. Mag. 25 (6) (2022)
Luigi Ferrigno, Filippo Milano, Valentina Pingerna, Gianni Cerro, Marco Laracca
Performance comparison in Ultra Wide Band positioning in sensor networks: least square minimization versus grid search approach. M&N (2022)
Luigi Ferrigno, Marco Laracca, Filippo Milano, Gianni Cerro, Paolo Bellitti, Mauro Serpelloni, Oscar Casas Piedrafita
Magnetic Localization System for Short-Range Positioning: A Ready-to-Use Design Tool. IEEE Trans. Instrum. Meas. 70 (2021)
Luigi Ferrigno, Filippo Milano, António Espírito-Santo, José A. C. Salvado, Marco Laracca, Vincenzo Paciello
On the Power Consumption of a Bluetooth Device Operating in Beacon Mode. IECON (2021)
Luigi Ferrigno, Marco Laracca, Adolfo Martucci, Gianfranco Miele, Silvia Sangiovanni
Analysis of the Uncertainty Contributions for on Board Vehicle Speed Meters Calibration Method. MetroAutomotive (2021)
Luigi Ferrigno, Gianfranco Miele, Filippo Milano, V. Pingerna, Gianni Cerro, Marco Laracca
A UWB-based localization system: analysis of the effect of anchor positions and robustness enhancement in indoor environments. I2MTC (2021)
Gianni Cerro, Luigi Ferrigno, Marco Laracca, Filippo Milano, Paolo Bellitti, Mauro Serpelloni, Oscar Casas Piedrafita
On a finite domain magnetic localization by means of TMR triaxial sensors. I2MTC (2020)
Adolfo Martucci, Giovanni Cerasuolo, Orsola Petrella, Marco Laracca
On the Calibration of GNSS-Based Vehicle Speed Meters. Sensors 20 (3) (2020)
Adolfo Martucci, Giovanni Cerasuolo, Orsola Petrella, Marco Laracca
An Uncertainty Analysis for the Calibration of GNSS-Based Vehicle Speed Meters. MetroInd4.0&IoT (2019)
Andrea Bernieri, Luigi Ferrigno, Marco Laracca, Antonio Rasile
Eddy Current Testing Probe Based on Double-Coil Excitation and GMR Sensor. IEEE Trans. Instrum. Meas. 68 (5) (2019)
Orsola Petrella, Giovanni Cerasuolo, Salvatore Ameduri, Vincenzo Quaranta, Marco Laracca
Calibration System for Multi-sensor Acoustical Systems. Sensors (2018)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
ECT probe improvement for in-service non-destructive testing on conductive materials. I2MTC (2018)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
Characterization of a TMR Sensor for EC-NDT Applications. Sensors (2018)
Gianni D'Angelo, Marco Laracca, Salvatore Rampone, Giovanni Betta
Fast Eddy Current Testing Defect Classification Using Lissajous Figures. IEEE Trans. Instrum. Meas. 67 (4) (2018)
Gianni Cerro, Marco Ferdinandi, Luigi Ferrigno, Marco Laracca, Mario Molinara
Metrological Characterization of a Novel Microsensor Platform for Activated Carbon Filters Monitoring. IEEE Trans. Instrum. Meas. 67 (10) (2018)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile
Improvement of the Frequency Behavior of an EC-NDT Inspection System. Sensors (2018)
Orsola Petrella, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta, Marco Laracca
An Experimental Setup for the Calibration of Acoustic Antenna. IEEE Trans. Instrum. Meas. 63 (5) (2014)
Giovanni Betta, Luigi Ferrigno, Marco Laracca, Pietro Burrascano, Marco Ricci
Optimized complex signals for Eddy Current Testing. I2MTC (2014)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Stefano Mastrostefano
Multifrequency Excitation and Support Vector Machine Regressor for ECT Defect Characterization. IEEE Trans. Instrum. Meas. 63 (5) (2014)
Orsola Petrella, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta, Marco Laracca
Modelling, parametric analysis, and optimization of an experimental set-up for acoustic antenna calibration. I2MTC (2013)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
Crack Depth Estimation by Using a Multi-Frequency ECT Method. IEEE Trans. Instrum. Meas. 62 (3) (2013)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
A novel biaxial probe implementing multifrequency excitation and SVM processing for NDT. I2MTC (2013)
Giovanni Betta, Luigi Ferrigno, Marco Laracca
Cost-Effective FPGA Instrument for Harmonic and Interharmonic Monitoring. IEEE Trans. Instrum. Meas. 62 (8) (2013)
Francesco Bonavolontà, Mauro D'Arco, Giacomo Ianniello, Annalisa Liccardo, Rosario Schiano Lo Moriello, Luigi Ferrigno, Marco Laracca, Gianfranco Miele
On the suitability of compressive sampling for the measurement of electrical power quality. I2MTC (2013)
Giovanni Betta, Luigi Ferrigno, Marco Laracca
GMR-Based ECT Instrument for Detection and Characterization of Crack on a Planar Specimen: A Hand-Held Solution. IEEE Trans. Instrum. Meas. 61 (2) (2012)
Luigi Ferrigno, Marco Laracca, Consolatina Liguori, Antonio Pietrosanto
An FPGA-Based Instrument for the Estimation of R, L, and C Parameters Under Nonsinusoidal Conditions. IEEE Trans. Instrum. Meas. 61 (5) (2012)
Luigi Ferrigno, Marco Laracca, Antonio Pietrosanto
Measurement of Passive R, L, and C Components Under Nonsinusoidal Conditions: The Solution of Some Case Studies. IEEE Trans. Instrum. Meas. 57 (11) (2008)
Andrea Bernieri, Luigi Ferrigno, Marco Laracca, Mario Molinara
Crack Shape Reconstruction in Eddy Current Testing Using Machine Learning Systems for Regression. IEEE Trans. Instrum. Meas. 57 (9) (2008)
Giovanni Betta, Domenico Capriglione, Marco Laracca
Reproducibility and Uncertainty of Conducted Emission Measurements for Adjustable-Speed Electrical Power Drive Characterization. IEEE Trans. Instrum. Meas. 55 (5) (2006)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
An automated self-calibrated instrument for nondestructive testing on conductive materials. IEEE Trans. Instrum. Meas. 53 (4) (2004)
Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca
A biaxial probe for nondestructive testing on conductive materials. IEEE Trans. Instrum. Meas. 53 (3) (2004)