Eckart Uhlmann

Publication Activity (10 Years)

Years Active: 2007-2024
Publications (10 Years): 10

Top Topics

Evolution Strategy

Cyber Physical Systems

Manufacturing Process

Top Venues

Int. J. Autom. Technol.

SOCO-CISIS-ICEUTE

Publications

Eckart Uhlmann, Mitchel Polte, Julian Blumberg, Sheng Yin, Gang Wang
. ICRA (2024)
Maximilian Gruber, Wenzel Pilar von Pilchau, Varun Gowtham, Nikolaos-Stefanos Koutrakis, Nicolas Schönborn, Sascha Eichstädt, Jörg Hähner, Marius Iulian Corici, Thomas Magedanz, Julian Polte, Eckart Uhlmann
Application of Uncertainty-Aware Sensor Fusion in Physical Sensor Networks. I2MTC (2022)
Julian Blumberg, Zhou-Long Li, Lemopi Isodore Besong, Mitchel Polte, Johannes Buhl, Eckart Uhlmann, Markus Bambach
Deformation error compensation of industrial robots in single point incremental forming by means of data-driven stiffness model. ICAC (2021)
Jan Streckenbach, Ivan Santibáñez-Koref, Ingo Rechenberg, Eckart Uhlmann
Optimization with the evolution strategy by example of electrical-discharge drilling. Neurocomputing 391 (2020)
Wenzel Pilar von Pilchau, Varun Gowtham, Maximilian Gruber, Matthias Riedl, Nikolaos-Stefanos Koutrakis, Jawad Tayyub, Jörg Hähner, Sascha Eichstädt, Eckart Uhlmann, Julian Polte, Volker Frey, Alexander Willner
An Architectural Design for Measurement Uncertainty Evaluation in Cyber-Physical Systems. CoRR (2020)
Wenzel Pilar von Pilchau, Varun Gowtham, Maximilian Gruber, Matthias Riedl, Nikolaos-Stefanos Koutrakis, Jawad Tayyub, Jörg Hähner, Sascha Eichstädt, Eckart Uhlmann, Julian Polte, Volker Frey, Alexander Willner
An Architectural Design for Measurement Uncertainty Evaluation in Cyber-Physical Systems. FedCSIS (Position Papers) (2020)
Eckart Uhlmann, Christian Sommerfeld
Dynamic Analysis of Abrasive Filaments in Contact with Different Workpiece Geometries. Int. J. Autom. Technol. 12 (6) (2018)
Eckart Uhlmann, Simon Roßkamp
Modelling of Material Removal in Abrasive Flow Machining. Int. J. Autom. Technol. 12 (6) (2018)
Klaudia Kovacs, Fazel Ansari, Claudio Geisert, Eckart Uhlmann, Robert Glawar, Wilfried Sihn
A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance. ML4CPS (2018)
Jan Streckenbach, Ivan Santibáñez-Koref, Ingo Rechenberg, Eckart Uhlmann
Optimization with the Evolution Strategy by Example of Electrical-Discharge Drilling. SOCO-CISIS-ICEUTE (2017)
Eckart Uhlmann, Fiona Sammler, M. Meixner, D. Heinrich, F. Gansert, Walter Reimers, Daniel Berger, I. Rieck
Analysis of residual stresses and wear mechanism of HF-CVD diamond coated cemented carbide tools. Prod. Eng. 9 (1) (2015)
Volker Schulze, Eckart Uhlmann, Rolf Mahnken, Andreas Menzel, Dirk Biermann, Andreas Zabel, Patrick Bollig, Ivan M. Ivanov, Chun Cheng, Raphael Holtermann, Thorsten Bartel
Evaluation of different approaches for modeling phase transformations in machining simulation. Prod. Eng. 9 (4) (2015)
Marco Müller, Quang-Ut Huynh, Eckart Uhlmann, Manfred H. Wagner
Study of inkjet printing as additive manufacturing process for gradient polyurethane material. Prod. Eng. 8 (1-2) (2014)
Eckart Uhlmann, L. Hochschild
Tool optimization for high speed grinding. Prod. Eng. 7 (2-3) (2013)
Eckart Uhlmann, S. Henze, Robert Gerstenberger, K. Brömmelhoff, Walter Reimers, Torben Fischer, N. Schell
An extended shear angle model derived from in situ strain measurements during orthogonal cutting. Prod. Eng. 7 (4) (2013)
Eckart Uhlmann, C. Bäcker, N. Schröer
Surface structuring using kinematic modulation in grinding. Prod. Eng. 7 (4) (2013)
Eckart Uhlmann, T. Hoghé
Wear reduction at double face grinding with planetary kinematics. Prod. Eng. 6 (3) (2012)
Eckart Uhlmann, Jiangmin Hu
Thermal modelling of an HSC machining centre to predict thermal error of the feed system. Prod. Eng. 6 (6) (2012)
Eckart Uhlmann, Bernd Duchstein
Austenitic stainless steel for separating safeguards: development of an FEA-model for the simulation of impact tests in reference to material specific parameters. Prod. Eng. 5 (3) (2011)
Eckart Uhlmann, Alexander Ziefle
Simulation approaches for pulse magnetic forming. Prod. Eng. 5 (6) (2011)
Eckart Uhlmann, Robert Gerstenberger, Stefan Herter, T. Hoghé, Walter Reimers, Bettina Camin, R. V. Martins, Andreas Schreyer, Torben Fischer
In situ strain measurement in the chip formation zone during orthogonal cutting. Prod. Eng. 5 (1) (2011)
Eckart Uhlmann, Patrick Rasper
Influences on specific cutting forces and their impact on the stability behaviour of milling processes. Prod. Eng. 5 (2) (2011)
Eckart Uhlmann, Gregor Hasper
Grain mill test for sintered microcrystalline aluminum oxide abrasive grains. Prod. Eng. 5 (5) (2011)
Eckart Uhlmann, Walter Reimers, F. Byrne, M. Klaus
Analysis of tool wear and residual stress of CVD diamond coated cemented carbide tools in the machining of aluminium silicon alloys. Prod. Eng. 4 (2-3) (2010)
Eckart Uhlmann, C. Sammler
Influence of coolant conditions in ultrasonic assisted grinding of high performance ceramics. Prod. Eng. 4 (6) (2010)
Eckart Uhlmann, Jens König
Analysis of the manufacturing chain of CVD diamond coated shaft type cutting tools. Prod. Eng. 4 (2-3) (2010)
Eckart Uhlmann, Stefan Herter, Robert Gerstenberger, Martin Roeder
Quasi-static chip formation of intermetallic titanium aluminides. Prod. Eng. 3 (3) (2009)
Eckart Uhlmann, S. Richarz, V. Mihotovic
Substrate pre-treatment of cemented carbides using abrasive flow machining and laser beam ablation. Prod. Eng. 3 (1) (2009)
Eckart Uhlmann, Thomas Friedrich, Nayim Bayat
Development of a technology orientated programming system for industrial robots. Prod. Eng. 2 (1) (2008)
Eckart Uhlmann, A. El Mernissi
Pre-treatment by dry ice blasting for adhesive bonding. Prod. Eng. 2 (2) (2008)
Eckart Uhlmann, Sascha Piltz, Dirk Oberschmidt
Machining of micro rotational parts by wire electrical discharge grinding. Prod. Eng. 2 (3) (2008)
Eckart Uhlmann, Frank Sroka, Christoph Hubert
Economical aspects of profiling diamond-grinding wheels. Int. J. Manuf. Technol. Manag. 12 (1/2/3) (2007)