Yu Zhao

Publication Activity (10 Years)

Years Active: 2011-2023
Publications (10 Years): 39

Top Topics

Assembly Process

Measurement Errors

Risk Evaluation

Top Venues

Reliab. Eng. Syst. Saf.

Qual. Reliab. Eng. Int.

Publications

Huiling Zheng, Jun Yang, Yu Zhao
Reliability demonstration test plan for degraded products subject to Gamma process with unit heterogeneity. Reliab. Eng. Syst. Saf. 240 (2023)
Huiling Zheng, Jun Yang, Houbao Xu, Yu Zhao
Reliability acceptance sampling plan for degraded products subject to Wiener process with unit heterogeneity. Reliab. Eng. Syst. Saf. 229 (2023)
Q. L. Zheng, Weiwei Duan, Wei Dai, Yu Zhao
Reliability Modeling and Rework Strategy Evaluation of Manufacturing System based on Stochastic-flow Network. IEEM (2022)
Qi Li, Jun Yang, Shuo Huang, Yu Zhao
Generally weighted moving average control chart for monitoring two-parameter exponential distribution with measurement errors. Comput. Ind. Eng. 165 (2022)
Lixiang Wang, Wei Dai, Dongmei Sun, Yu Zhao
Risk Evaluation for a Manufacturing Process Based on a Directed Weighted Network. Entropy 22 (6) (2020)
Tianyi Wu, Li Yang, Xiaobing Ma, Zihan Zhang, Yu Zhao
Dynamic maintenance strategy with iteratively updated group information. Reliab. Eng. Syst. Saf. 197 (2020)
Lixiang Wang, Wei Dai, Jun Ai, Weiwei Duan, Yu Zhao
Reliability Evaluation for Manufacturing System Based on Dynamic Adaptive Fuzzy Reasoning Petri Net. IEEE Access 8 (2020)
Jianchun Zhang, Yu Zhao, Xiaobing Ma
system subject to discrete external load. Reliab. Eng. Syst. Saf. 193 (2020)
Mengyao Wu, Wei Dai, Yubing Huang, Yu Zhao
The Analysis of Defect Emergence in Assembly Process Based on the Discrete-Time SIRS Model. IEEE Access 7 (2019)
Mengyao Wu, Wei Dai, Yu Zhao
Research on the Propagation of Defects in Assembly Process Based on SIR Epidemic Model. ICPHM (2019)
Han Wang, Yu Zhao, Xiaobing Ma, Zhihua Wang
A novel pseudo-maximum likelihood estimation method for accelerated degradation tests under Wiener process. Qual. Reliab. Eng. Int. 35 (1) (2019)
Mengyao Wu, Wei Dai, Zhiyuan Lu, Yu Zhao, Meiqing Wang
The Method for Risk Evaluation in Assembly Process based on the Discrete-Time SIRS Epidemic Model and Information Entropy. Entropy 21 (11) (2019)
Jianchun Zhang, Yu Zhao, Xiaobing Ma
: F system based on load-strength model. Reliab. Eng. Syst. Saf. 182 (2019)
Lixiang Wang, Wei Dai, Guixiu Luo, Yu Zhao
A Novel Approach to Support Failure Mode, Effects, and Criticality Analysis Based on Complex Networks. Entropy 21 (12) (2019)
Li Yang, Yu Zhao, Rui Peng, Xiaobing Ma
Hybrid preventive maintenance of competing failures under random environment. Reliab. Eng. Syst. Saf. 174 (2018)
Han Wang, Yu Zhao, Xiaobing Ma
A Multi-objective Framework for Designing Accelerated Degradation Tests Under Wiener Process Model. IEEM (2018)
Li Yang, Yu Zhao, Xiaobing Ma
Multi-level maintenance strategy of deteriorating systems subject to two-stage inspection. Comput. Ind. Eng. 118 (2018)
Hongyu Wang, Yu Zhao, Xiaobing Ma
Remaining Useful Life Prediction Using a Novel Two-Stage Wiener Process With Stage Correlation. IEEE Access 6 (2018)
Yubing Huang, Wei Dai, Weiping Mou, Yu Zhao
Uncertainty Evaluation in Multistage Assembly Process Based on Enhanced OOPN. Entropy 20 (3) (2018)
Yikun Cai, Yu Zhao, Xiaobing Ma, Zhenyu Yang, Ying Ding
An Extended Model for Fatigue Life Prediction and Acceleration Considering Load Frequency Effect. IEEE Access 6 (2018)
Han Wang, Yu Zhao, Xiaobing Ma
Mechanism Equivalence in Designing Optimum Step-Stress Accelerated Degradation Test Plan Under Wiener Process. IEEE Access 6 (2018)
Yubing Huang, Wei Dai, Lianxi Liu, Yu Zhao
Screening Scheme Evaluation of the Assembly Process Based on the Stress-Strength Model and Defect Stream Analysis. Entropy 20 (6) (2018)
Jianchun Zhang, Yu Zhao, Xiaobing Ma
Time-dependent Reliability Modelling Method Based on Load-strength Model in the Presence of Environmental Effects. IEEM (2018)
Huan Yu, Jun Yang, Jing Lin, Yu Zhao
Reliability evaluation of non-repairable phased-mission common bus systems with common cause failures. Comput. Ind. Eng. 111 (2017)
Han Wang, Yu Zhao, Xiaobing Ma, Li Yang
Equivalence analysis of accelerated degradation mechanism based on stochastic degradation models. Qual. Reliab. Eng. Int. 33 (8) (2017)
Jianchun Zhang, Xiaobing Ma, Yu Zhao
Reliability Demonstration for Long-Life Products Based on Hardened Testing Method and Gamma Process. IEEE Access 5 (2017)
Han Wang, Yu Zhao, Xiaobing Ma, Hongyu Wang
Optimal design of constant-stress accelerated degradation tests using the M-optimality criterion. Reliab. Eng. Syst. Saf. 164 (2017)
Li Yang, Yu Zhao, Xiaobing Ma
An inspection model for a multi-component system subject to 2 types of failures. Qual. Reliab. Eng. Int. 33 (8) (2017)
Li Yang, Xiaobing Ma, Yu Zhao
A condition-based maintenance model for a three-state system subject to degradation and environmental shocks. Comput. Ind. Eng. 105 (2017)
Jianchun Zhang, Xiaobing Ma, Yu Zhao
A Stress-Strength Time-Varying Correlation Interference Model for Structural Reliability Analysis Using Copulas. IEEE Trans. Reliab. 66 (2) (2017)
Li Yang, Xiaobing Ma, Rui Peng, Qingqing Zhai, Yu Zhao
A preventive maintenance policy based on dependent two-stage deterioration and external shocks. Reliab. Eng. Syst. Saf. 160 (2017)
Huan Yu, Jun Yang, Rui Peng, Yu Zhao
Reliability evaluation of linear multi-state consecutively-connected systems constrained by m consecutive and n total gaps. Reliab. Eng. Syst. Saf. 150 (2016)
Li Yang, Xiaobing Ma, Qingqing Zhai, Yu Zhao
A delay time model for a mission-based system subject to periodic and random inspection and postponed replacement. Reliab. Eng. Syst. Saf. 150 (2016)
Qingqing Zhai, Zhi-Sheng Ye, Jun Yang, Yu Zhao
Measurement errors in degradation-based burn-in. Reliab. Eng. Syst. Saf. 150 (2016)
Zhenyu Liu, Xiaobing Ma, Lijuan Shen, Yu Zhao
Degradation-shock-based Reliability Models for Fault-tolerant Systems. Qual. Reliab. Eng. Int. 32 (3) (2016)
Wei Dai, Paul G. Maropoulos, Yu Zhao
Reliability modelling and verification of manufacturing processes based on process knowledge management. Int. J. Comput. Integr. Manuf. 28 (1) (2015)
Xiaobing Ma, Feng-Chun Lin, Yu Zhao
An Adjustment to the Bartlett's Test for Small Sample Size. Commun. Stat. Simul. Comput. 44 (1) (2015)
Xiaonan Wu, Wei Dai, Yu Zhao, Fen Kuang, Guixiu Luo
Research on multi-stage manufacturing process reliability improvement. INDIN (2015)
Qingqing Zhai, Jun Yang, Rui Peng, Yu Zhao
A Study of Optimal Component Order in a General 1-Out-of-n Warm Standby System. IEEE Trans. Reliab. 64 (1) (2015)
Qingqing Zhai, Jun Yang, Min Xie, Yu Zhao
Generalized moment-independent importance measures based on Minkowski distance. Eur. J. Oper. Res. 239 (2) (2014)
Qingqing Zhai, Jun Yang, Yu Zhao
Space-partition method for the variance-based sensitivity analysis: Optimal partition scheme and comparative study. Reliab. Eng. Syst. Saf. 131 (2014)
Lijuan Shen, Jun Yang, Yu Zhao
Simultaneous Optimization of Robust Parameter and Tolerance Design Based on Generalized Linear Models. Qual. Reliab. Eng. Int. 29 (8) (2013)
Lijuan Shen, Jun Yang, Yu Zhao
An integration design optimization framework of robust design, axiomatic design, and reliability-based design. Qual. Reliab. Eng. Int. 27 (7) (2011)