Jun Yang

Publication Activity (10 Years)

Years Active: 2016-2024
Publications (10 Years): 56

Top Topics

Wireless Sensor

Measurement Errors

Domain Adaptation

Reliability Analysis

Top Venues

Reliab. Eng. Syst. Saf.

Qual. Reliab. Eng. Int.

Comput. Ind. Eng.

IEEE Trans. Reliab.

Publications

Changzhen Zhang, Jun Yang, Ning Wang
An active queue management for wireless sensor networks with priority scheduling strategy. J. Parallel Distributed Comput. 187 (2024)
Tianzi Tian, Jun Yang, Ning Wang
Reliability assessment of two-level balanced systems with common bus performance sharing subjected to epistemic uncertainty. Qual. Reliab. Eng. Int. 40 (1) (2024)
Ning Wang, Jia-tao He, Shihu Xiang, Jun Yang
Transmission reliability evaluation of the wireless mobile ad hoc network considering the routing protocol and randomness of channel capacity. Qual. Reliab. Eng. Int. 40 (1) (2024)
Ning Wang, Tianzi Tian, Jia-tao He, Chang-zhen Zhang, Jun Yang
Transmission reliability evaluation of wireless sensor networks considering channel capacity randomness and energy consumption failure. Reliab. Eng. Syst. Saf. 242 (2024)
Yulin Ma, Jun Yang, Ruqiang Yan
Sharpness-Aware Gradient Alignment for Domain Generalization With Noisy Labels in Intelligent Fault Diagnosis. IEEE Trans. Instrum. Meas. 73 (2024)
Changzhen Zhang, Jun Yang, Mingjia Li, Ning Wang
Reliability analysis of a two-dimensional linear consecutive-(r,s)-out-of-(m,n): F repairable system. Reliab. Eng. Syst. Saf. 242 (2024)
Qingqing Zhai, Ancha Xu, Jun Yang, Yijing Zhou
Statistical Modeling and Reliability Analysis for Degradation Processes Indexed by Two Scales. IEEE Trans. Ind. Informatics 20 (3) (2024)
Lujie Liu, Jun Yang, Bingxin Yan
A dynamic mission abort policy for transportation systems with stochastic dependence by deep reinforcement learning. Reliab. Eng. Syst. Saf. 241 (2024)
Yan Shi, Lei Li, Jun Yang, Na Wang, Changhui Wang, Yixuan Wang
Transfer Learning Using Cluster Centers for Surface Defect Identification of Piston Rods in Pneumatic Cylinders. IEEE Trans. Instrum. Meas. 72 (2023)
Huiling Zheng, Jun Yang, Yu Zhao
Reliability demonstration test plan for degraded products subject to Gamma process with unit heterogeneity. Reliab. Eng. Syst. Saf. 240 (2023)
Fanbing Meng, Fangfang Yang, Jun Yang, Min Xie
A power model considering initial battery state for remaining useful life prediction of lithium-ion batteries. Reliab. Eng. Syst. Saf. 237 (2023)
Yulin Ma, Jun Yang, Lei Li
Meta Bi-classifier Gradient Discrepancy for noisy and universal domain adaptation in intelligent fault diagnosis. Knowl. Based Syst. 276 (2023)
Ning Wang, Yiyong Xiao, Tianzi Tian, Jun Yang
The optimal 5G base station location of the wireless sensor network considering timely reliability. Reliab. Eng. Syst. Saf. 236 (2023)
Shihu Xiang, Jun Yang
A novel adaptive deployment method for the single-target tracking of mobile wireless sensor networks. Reliab. Eng. Syst. Saf. 234 (2023)
Yulin Ma, Jun Yang, Lei Li
Gradient aligned domain generalization with a mutual teaching teacher-student network for intelligent fault diagnosis. Reliab. Eng. Syst. Saf. 239 (2023)
Lujie Liu, Jun Yang
A dynamic mission abort policy for the swarm executing missions and its solution method by tailored deep reinforcement learning. Reliab. Eng. Syst. Saf. 234 (2023)
Hao Xing, Jun Yang
A highly accelerated stress reliability growth test method. Qual. Reliab. Eng. Int. 39 (8) (2023)
Huiling Zheng, Jun Yang, Houbao Xu, Yu Zhao
Reliability acceptance sampling plan for degraded products subject to Wiener process with unit heterogeneity. Reliab. Eng. Syst. Saf. 229 (2023)
Changzhen Zhang, Jun Yang, Ning Wang
-policy sleep scheduling. Reliab. Eng. Syst. Saf. 235 (2023)
Yifan Lou, Huiling Zheng, Jun Yang
Optimal design of reliability acceptance sampling plan based on constant-stress accelerated life testing considering the uncertainty of accelerated factor. Qual. Reliab. Eng. Int. 39 (4) (2023)
Tianzi Tian, Jun Yang, Lei Li, Ning Wang
Reliability assessment of performance-based balanced systems with rebalancing mechanisms. Reliab. Eng. Syst. Saf. 233 (2023)
Lujie Liu, Jun Yang
Dynamic operations and maintenance of an unmanned aerial vehicle swarm for continuous emergency communication. Comput. Ind. Eng. 184 (2023)
Linhan Guo, Ruiyang Li, Yu Wang, Jun Yang, Yu Liu, Yiming Chen, Jianguo Zhang
: G warm-standby system in series with shut-off rule of suspended animation. Reliab. Eng. Syst. Saf. 233 (2023)
Fanbing Meng, Jun Yang
-value. Qual. Reliab. Eng. Int. 39 (6) (2023)
Lei Li, Jun Yang, Yulin Ma, Xuefeng Kong
Pseudo-labeling Integrating Centers and Samples with Consistent Selection Mechanism for Unsupervised Domain Adaptation. Inf. Sci. 628 (2023)
Lujie Liu, Yiyong Xiao, Jun Yang, Yaonan Ding
Selective maintenance of multi-state systems with the repairperson fatigue effect and stochastic break duration. Qual. Reliab. Eng. Int. 39 (8) (2023)
Lei Li, Jun Yang, Xuefeng Kong, Yulin Ma
Discriminative transfer feature learning based on robust-centers. Neurocomputing 500 (2022)
Lei Li, Jun Yang, Xuefeng Kong, Jianchun Zhang, Yulin Ma
Unsupervised domain adaptation via discriminative feature learning and classifier adaptation from center-based distances. Knowl. Based Syst. 250 (2022)
Chen Cheng, Jun Yang, Lei Li
Reliability Assessment of Multi-State Phased Mission Systems With Common Bus Performance Sharing Subjected to Epistemic Uncertainty. IEEE Trans. Reliab. 71 (3) (2022)
Lujie Liu, Jun Yang, Xuefeng Kong, Yiyong Xiao
Multi-mission selective maintenance and repairpersons assignment problem with stochastic durations. Reliab. Eng. Syst. Saf. 219 (2022)
Yulin Ma, Lei Li, Jun Yang
Convolutional kernel aggregated domain adaptation for intelligent fault diagnosis with label noise. Reliab. Eng. Syst. Saf. 227 (2022)
Yulin Ma, Jun Yang, Lei Li
Collaborative and adversarial deep transfer auto-encoder for intelligent fault diagnosis. Neurocomputing 486 (2022)
Qi Li, Jun Yang, Shuo Huang, Yu Zhao
Generally weighted moving average control chart for monitoring two-parameter exponential distribution with measurement errors. Comput. Ind. Eng. 165 (2022)
Xuefeng Kong, Jun Yang, Songhua Hao
Reliability modeling-based tolerance design and process parameter analysis considering performance degradation. Reliab. Eng. Syst. Saf. 207 (2021)
Lei Li, Xiaolei Xie, Jun Yang
A predictive model incorporating the change detection and Winsorization methods for alerting hypoglycemia and hyperglycemia. Medical Biol. Eng. Comput. 59 (11) (2021)
Fanbing Meng, Jun Yang, Shuo Huang
Hypothesis testing of process capability index C p k from the perspective of generalized fiducial inference. Qual. Reliab. Eng. Int. 37 (4) (2021)
Huiling Zheng, Xuefeng Kong, Houbao Xu, Jun Yang
Reliability analysis of products based on proportional hazard model with degradation trend and environmental factor. Reliab. Eng. Syst. Saf. 216 (2021)
Xiangxiang Zhang, Jun Yang, Xuefeng Kong
Planning constant-stress accelerated life tests with multiple stresses based on D-optimal design. Qual. Reliab. Eng. Int. 37 (1) (2021)
Chen Cheng, Jun Yang, Lei Li
Reliability evaluation of a k-out-of-n(G)-subsystem based multi-state phased mission system with common bus performance sharing subjected to common cause failures. Reliab. Eng. Syst. Saf. 216 (2021)
Pei Yang, Yiyong Xiao, Yue Zhang, Shenghan Zhou, Jun Yang, Yuchun Xu
The continuous maximal covering location problem in large-scale natural disaster rescue scenes. Comput. Ind. Eng. 146 (2020)
Xuefeng Kong, Jun Yang
Reliability analysis of composite insulators subject to multiple dependent competing failure processes with shock duration and shock damage self-recovery. Reliab. Eng. Syst. Saf. 204 (2020)
Shihu Xiang, Jun Yang
k-Terminal Reliability of Ad Hoc Networks Considering the Impacts of Node Failures and Interference. IEEE Trans. Reliab. 69 (2) (2020)
Chen Cheng, Jun Yang, Lei Li
Reliability assessment of multi-state phased mission systems with common bus performance sharing considering transmission loss and performance storage. Reliab. Eng. Syst. Saf. 199 (2020)
Jun Yang, Fanbing Meng, Shuo Huang, Yanhe Cui
Process capability analysis for manufacturing processes based on the truncated data from supplier products. Int. J. Prod. Res. 58 (20) (2020)
Shihu Xiang, Jun Yang
Reliability Evaluation and Reliability-Based Optimal Design for Wireless Sensor Networks. IEEE Syst. J. 14 (2) (2020)
Songhua Hao, Jun Yang
Dependent Competing Failure Modeling for the GIL Subject to Partial Discharge and Air Leakage With Random Degradation Initiation Time. IEEE Trans. Reliab. 68 (3) (2019)
Xuefeng Kong, Jun Yang
Remaining Useful Life Prediction of Rolling Bearings Based on RMS-MAVE and Dynamic Exponential Regression Model. IEEE Access 7 (2019)
Jun Yang, Lei Li, Yimeng Shi, Xiaolei Xie
An ARIMA Model With Adaptive Orders for Predicting Blood Glucose Concentrations and Hypoglycemia. IEEE J. Biomed. Health Informatics 23 (3) (2019)
Shihu Xiang, Jun Yang
An Adaptive Use Strategy for Solid-State Lasers by Combining Maximum Likelihood Estimation With Model Predictive Control. IEEE Access 7 (2019)
Songhua Hao, Jun Yang, Christophe Bérenguer
Degradation analysis based on an extended inverse Gaussian process model with skew-normal random effects and measurement errors. Reliab. Eng. Syst. Saf. 189 (2019)
Songhua Hao, Jun Yang
Reliability analysis for dependent competing failure processes with changing degradation rate and hard failure threshold levels. Comput. Ind. Eng. 118 (2018)
Xuefeng Kong, Jun Yang, Xiaolu Fu
Reliability-based Usage Strategy Optimization for Lifetime Maximization of Solid-state Lasers. ICPHM (2018)
Songhua Hao, Jun Yang
A Novel Quality Requirement Design Method for the Quality Characteristic of Rubber Products Based on the Reliability Constraint. IEEE Access 6 (2018)
Songhua Hao, Jun Yang, Christophe Bérenguer
Nonlinear step-stress accelerated degradation modelling considering three sources of variability. Reliab. Eng. Syst. Saf. 172 (2018)
Chen Cheng, Jun Yang, Xuefeng Kong
Research on Sampling Method of CFSFDP Clustering Algorithm and Its Criteria for Determining the Best Sample Size. ICAAI (2018)
Hao Wang, Jun Yang, Songhua Hao
Two Inverse Normalizing Transformation methods for the process capability analysis of non-normal process data. Comput. Ind. Eng. 102 (2016)