C
search
search
reviewers
reviewers
feeds
feeds
assignments
assignments
settings
logout
Vinod Yadava
ORCID
Publication Activity (10 Years)
Years Active: 2005-2015
Publications (10 Years): 1
Top Topics
Finite Element
Manufacturing Process
Electrical Properties
High Speed
Top Venues
Int. J. Manuf. Technol. Manag.
Int. J. Manuf. Mater. Mech. Eng.
Int. J. Manuf. Res.
Simul. Model. Pract. Theory
</>
Publications
</>
Umacharan Singh Yadav
,
Vinod Yadava
Experimental modelling and optimisation of process parameters of hole drilling by electrical discharge machining of aerospace titanium alloy.
Int. J. Manuf. Technol. Manag.
29 (3/4) (2015)
Rajesh Kumar Porwal
,
Vinod Yadava
Experimentation and prediction of material removal rate of electrical discharge micromachining of nickel-based super alloy thin sheet.
Int. J. Comput. Aided Eng. Technol.
6 (1) (2014)
Ravindra Nath Yadav
,
Vinod Yadava
,
G. K. Singh
Modelling and simulation of spark assisted diamond face grinding of tungsten carbide-cobalt composite using ANN.
Int. J. Manuf. Technol. Manag.
28 (1/2/3) (2014)
Rajesh Kumar Porwal
,
Vinod Yadava
,
J. Ramkumar
Neural Network Based Modelling and GRA Coupled PCA Optimization of Hole Sinking Electro Discharge Micromachining.
Int. J. Manuf. Mater. Mech. Eng.
4 (1) (2014)
Ravindra Nath Yadav
,
Vinod Yadava
A new way of erosion-abrasion hybrid machining using slotted-diamond grinding wheel.
Int. J. Manuf. Technol. Manag.
28 (1/2/3) (2014)
Rajesh Kumar Porwal
,
Vinod Yadava
Modelling of performance characteristics during sinking electrical discharge micromachining of Ti-6Al-4V thin sheet.
Int. J. Manuf. Res.
9 (3) (2014)
Amit Sharma
,
Vinod Yadava
,
K. B. Judal
Intelligent Modelling and Multi-Objective Optimisation of Laser Beam Cutting of Nickel Based Superalloy Sheet.
Int. J. Manuf. Mater. Mech. Eng.
3 (2) (2013)
K. B. Judal
,
Vinod Yadava
A study of electrochemical magnetic abrasive machining process.
Int. J. Manuf. Technol. Manag.
27 (4/5/6) (2013)
Amit Sharma
,
Vinod Yadava
Simultaneous optimisation of average kerf taper and surface roughness during pulsed Nd: YAG laser cutting of thin Al-alloy sheet for straight profile.
Int. J. Manuf. Technol. Manag.
27 (1/2/3) (2013)
P. S. Balaji
,
Vinod Yadava
Three dimensional thermal finite element simulation of electro-discharge diamond surface grinding.
Simul. Model. Pract. Theory
35 (2013)
Audhesh Narayan
,
Vinod Yadava
Investigation of Temperature Distribution in the Workpiece During High Speed Deep Surface Grinding using FEM.
Int. J. Manuf. Mater. Mech. Eng.
2 (3) (2012)
Amit Sharma
,
Vinod Yadava
Optimisation of cut qualities during pulsed Nd: YAG laser cutting of SUPERNI 718 thin sheet for straight profile.
Int. J. Manuf. Technol. Manag.
24 (1/2/3/4) (2011)
Patil Makarand Ramu
,
Vinod Yadava
Determination of thermal stress distribution in metallic layer during selective laser sintering using finite element method.
Int. J. Manuf. Technol. Manag.
13 (2/3/4) (2008)
R. S. Mulik
,
Vinod Yadava
Thermal stresses during electro-chemical spark machining.
Int. J. Manuf. Technol. Manag.
7 (2/3/4) (2005)
Vinod Yadava
,
V. K. Jain
,
Prakash M. Dixit
Temperature distribution in the workpiece due to electro-discharge diamond surface grinding using FEM.
Int. J. Manuf. Technol. Manag.
7 (2/3/4) (2005)