Thomas M. Wolbank

Publication Activity (10 Years)

Years Active: 2002-2023
Publications (10 Years): 10

Top Topics

Operating Point

Visual Attention

Finite Element Model

Induction Motor

Top Venues

IEEE Trans. Ind. Electron.

Elektrotech. Informationstechnik

Publications

Eduardo Rodriguez Montero, Markus A. Vogelsberger, Thomas M. Wolbank
Hybrid Encoderless Control of Multi-Salient Induction Motors in Parallel Connection at Variable Flux and Torque. ISIE (2023)
Eduardo Rodriguez Montero, Markus A. Vogelsberger, Thomas M. Wolbank
Sensorless Saliency-Based Control of Dual Induction Machines Under Dynamic Load Imbalances Using Three Current Sensors. IEEE Trans. Ind. Electron. 70 (12) (2023)
Eduardo Rodriguez Montero, Markus A. Vogelsberger, Thomas M. Wolbank
One Active State Excitation for Saliency-based Encoderless Control of Dual Motors Supplied by a Single Inverter. IECON (2022)
Ali Qerkini, Markus A. Vogelsberger, Werner Grubelnik, Edgar Moser, Thomas M. Wolbank
Lifetime characterization of partial discharge properties of insulation material exposed to voltage pulse stress. IECON (2021)
Eduardo Rodriguez Montero, Markus A. Vogelsberger, Thomas M. Wolbank
Sensorless Speed Control of Single-Inverter Dual Motors based on Slotting Saliency Harmonic. ICIT (2021)
Wolfgang R. Fahrner, Markus A. Vogelsberger, Thomas M. Wolbank
Identification of Induction Machine Rotor Parameters at any Operating Point Considering Temperature dependent Permeability. IECON (2019)
Clemens Zöller, Markus A. Vogelsberger, Thomas M. Wolbank
Zustandsüberwachung der Statorisolation von umrichtergespeisten elektrischen Maschinen mittels transienter Stromcharakteristik. Elektrotech. Informationstechnik 135 (2) (2018)
Wolfgang R. Fahrner, Thomas M. Wolbank, Markus A. Vogelsberger
Identification and compensation of high-order harmonic distortions in saliency based sensorless control of induction machines. IECON (2017)
E. Spahovic, Matthias A. Samonig, Markus A. Vogelsberger, Thomas M. Wolbank
Finite element modelling of asymmetries in the high frequency magnetic properties of induction machines based on adaptive transient permeability. IECON (2017)
Clemens Zöller, Markus A. Vogelsberger, Thomas M. Wolbank
Assessment of insulation condition parameters of low-voltage random-wound electrical machine. IECON (2016)
Peter Nussbaumer, Markus A. Vogelsberger, Thomas M. Wolbank
Induction Machine Insulation Health State Monitoring Based on Online Switching Transient Exploitation. IEEE Trans. Ind. Electron. 62 (3) (2015)
Clemens Zöller, Hans Ertl, Thomas M. Wolbank, Markus A. Vogelsberger
Influence of fast inverter switching based on SiC semi-conductors on online insulation monitoring of high power traction machines. ICIT (2015)
M. Amhof, Matthias A. Samonig, Thomas M. Wolbank
Sensorless position estimation from PWM-induced transient excitation in induction machines. IECON (2015)
Clemens Zöller, Thomas M. Wolbank, Markus A. Vogelsberger
Online insulation condition monitoring of traction machines using inverter induced voltage injection. IECON (2015)
Clemens Zöller, Thomas Winter, Thomas M. Wolbank, Markus A. Vogelsberger, Martin Bazant
Separation of fundamental wave and transient components of the current signal for machine insulation state monitoring. IECON (2014)
Matthias A. Samonig, Thomas M. Wolbank
Prediction of slotting saliency in induction machines with respect to high-frequency-excitation based sensorless control. IECON (2014)
Peter Nussbaumer, Clemens Zöller, Thomas M. Wolbank, Markus A. Vogelsberger
Transient distribution of voltages in induction machine stator windings resulting from switching of power electronics. IECON (2013)
Vinko Lesic, Mario Vasak, Nedjeljko Peric, Gojko Joksimovic, Thomas M. Wolbank
Optimal flux magnitude tracking with application to fault-tolerant control of wind turbine generators. ECC (2013)
Gojko Joksimovic, Jaksa Riger, Thomas M. Wolbank, Nedjeljko Peric, Mario Vasak
Stator-Current Spectrum Signature of Healthy Cage Rotor Induction Machines. IEEE Trans. Ind. Electron. 60 (9) (2013)
Goran Stojcic, Robert Magnet, Gojko Joksimovic, Mario Vasak, Nedjeljko Peric, Thomas M. Wolbank
Detecting partially fallen-out magnetic slot wedges in AC machines based on electrical quantities only. IECON (2012)
Vinko Lesic, Mario Vasak, Nedjeljko Peric, Gojko Joksimovic, Thomas M. Wolbank
Fault-tolerant control of a wind turbine with a squirrel-cage induction generator and stator inter-turn faults. AMC (2012)
Peter Nussbaumer, Christian Santin, Thomas M. Wolbank
Analysis of current reaction on inverter-switching to detect changes in electrical machine's high-frequency behavior. IECON (2012)
Thomas M. Wolbank, Peter Nussbaumer, Hao Chen, Peter E. Macheiner
Monitoring of Rotor-Bar Defects in Inverter-Fed Induction Machines at Zero Load and Speed. IEEE Trans. Ind. Electron. 58 (5) (2011)
Markus A. Vogelsberger, Stefan Grubic, Thomas G. Habetler, Thomas M. Wolbank
Using PWM-Induced Transient Excitation and Advanced Signal Processing for Zero-Speed Sensorless Control of AC Machines. IEEE Trans. Ind. Electron. 57 (1) (2010)
Thomas M. Wolbank, Mohamed K. Metwally
Zero Speed Sensorless Control of Induction Machines Using Rotor Saliencies. IAS (2008)
Thomas M. Wolbank, Markus A. Vogelsberger, R. Stumberger, Salman Mohagheghi, Thomas G. Habetler, Ronald G. Harley
Autonomous Self Commissioning Method for Speed Sensorless Controlled Induction Machines. IAS (2007)
Thomas M. Wolbank, J. L. Machl, Hans Hauser
Closed-loop compensating sensors versus new current derivative sensors for shaft-sensorless control of inverter fed induction machines. IEEE Trans. Instrum. Meas. 53 (4) (2004)
Thomas M. Wolbank, A. Moucka, Juergen L. Machl
A comparative study of field-oriented and direct-torque control of induction motors reference to shaft-sensorless control at low and zero-speed. ISIC (2002)
Hans Hauser, Paul L. Fulmek, Felix A. Himmelstoss, Thomas M. Wolbank, Reinhard Wöhrnschimmel, Peter R. Wurm
Magnetic Hysteresis Modeling of Electronic Components. DELTA (2002)
Thomas M. Wolbank, Reinhard Wöhrnschimmel, Hans Hauser
Transient simulation of lamination material properties in electrical machines. IEEE Trans. Ind. Electron. 49 (3) (2002)