Ryutaro Tanaka

Publication Activity (10 Years)

Years Active: 2009-2024
Publications (10 Years): 7

Top Topics

Machining Processes

Surface Roughness

Top Venues

Int. J. Autom. Technol.

IEICE Trans. Electron.

Publications

Ryo Sakamoto, Ryutaro Tanaka, Isaí Espinoza-Torres, Israel Martínez-Ramírez, Katsuhiko Sekiya, Keiji Yamada
Prediction of Surface Roughness Components in Turning with Single Point Tool - Measurement of Tool Edge Contour and Prediction of its Position During Cutting -. Int. J. Autom. Technol. 18 (3) (2024)
Ryutaro Tanaka, Satomitsu Imai
Biofuel Cell Fueled by Decomposing Cellulose Nanofiber to Glucose by Using Cellulase Enzyme. IEICE Trans. Electron. 106 (6) (2023)
Takahide Hayashida, Ryutaro Tanaka, Katsuhiko Sekiya, Keiji Yamada
Effect of Cutting Fluid on Tool Wear in Finished Surface Formation Area of Rounded Nosed Tool When Turning Alloy 304. Int. J. Autom. Technol. 16 (5) (2022)
Ryutaro Tanaka, Mitsuhiro Ogawa, Satomitsu Imai
Biofuel Cell Using Cellulose Nanofiber as Fuel Supply. IEICE Trans. Electron. (6) (2021)
Muizuddin Azka, Keiji Yamada, Mahfudz Al Huda, Kyosuke Mani, Ryutaro Tanaka, Katsuhiko Sekiya
Hilbert-Huang Transform Analysis of Machining Stability in Ball-Nose End-Milling of Curved Surface. Int. J. Autom. Technol. 14 (3) (2020)
Agus Susanto, Chia-Hung Liu, Keiji Yamada, Yean-Ren Hwang, Ryutaro Tanaka, Katsuhiko Sekiya
Milling Process Monitoring Based on Vibration Analysis Using Hilbert-Huang Transform. Int. J. Autom. Technol. 12 (5) (2018)
Yuto Kojima, Ryutaro Tanaka, Yasuo Yamane, Katsuhiko Sekiya, Keiji Yamada
Drilling of CFRP with an Electrodeposited Diamond Core Drill - Effects of Air Assistance and Tool Shape -. Int. J. Autom. Technol. 10 (3) (2016)
Ryutaro Tanaka, Yasutake Okuda, Satoru Takahashi, Shoji Oda, Shun'ichi Kaneko
Medaka Observation Based on Rotation Invariant Features. CANDAR (2013)
Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda
Effects of Tool Edge Geometry on Cutting Temperature in Continuous Cutting of Case Hardened Steel. Int. J. Autom. Technol. 7 (3) (2013)
Jie Xu, Keiji Yamada, Katsuhiko Seikiya, Ryutaro Tanaka, Yasuo Yamane
A Basic Study on the Relations Between Machining Conditions and the Static and Dynamic Components of Forces in Drilling. Int. J. Autom. Technol. 7 (3) (2013)
Ryutaro Tanaka, Takashi Kito, Akira Hosokawa, Takashi Ueda, Tatsuaki Furumoto
Machined Workpiece Edge Shape Control by Laser Hardening - Optimizing Laser Scan Conditions and Cutter Paths -. Int. J. Autom. Technol. 4 (1) (2010)
Keiji Yamada, Takashi Ueda, Akira Hosokawa, Tatsuaki Furumoto, Ryutaro Tanaka
Dental Treatment with Laser Beam -Monitoring Enabling Safe Hard-Tooth-Tissue Removal-. Int. J. Autom. Technol. 3 (5) (2009)