Fathy Ismail

Publication Activity (10 Years)

Years Active: 1998-2017
Publications (10 Years): 1

Top Topics

Pattern Classification Problems

Induction Motor

Top Venues

IEEE Trans. Instrum. Meas.

IEEE Trans. Cybern.

Publications

Dezhi Li, Wilson Wang, Fathy Ismail
A regulated boosting technique for material fatigue property prognostics. Eng. Appl. Artif. Intell. 57 (2017)
Dezhi Li, Wilson Wang, Fathy Ismail
An Enhanced Bispectrum Technique With Auxiliary Frequency Injection for Induction Motor Health Condition Monitoring. IEEE Trans. Instrum. Meas. 64 (10) (2015)
Dezhi Li, Wilson Wang, Fathy Ismail
A fuzzy-filtered grey network technique for system state forecasting. Soft Comput. 19 (12) (2015)
Dezhi Li, Wilson Wang, Fathy Ismail
A selective boosting technique for pattern classification. Neurocomputing 156 (2015)
Dezhi Li, Wilson Wang, Fathy Ismail
A Mutated Particle Filter Technique for System State Estimation and Battery Life Prediction. IEEE Trans. Instrum. Meas. 63 (8) (2014)
Dezhi Li, Wilson Wang, Fathy Ismail
An evolving fuzzy neural predictor for multi-dimensional system state forecasting. Neurocomputing 145 (2014)
Theodoros Vasilopoulos, Kaan Erkorkmaz, Fathy Ismail, Robert M. Pilliar
Modeling, Simulation, and Optimization of Machining Polymer Infiltrated Calcium Polyphosphate. Int. J. Autom. Technol. 7 (1) (2013)
Dezhi Li, Wilson Wang, Fathy Ismail
Fuzzy Neural Network Technique for System State Forecasting. IEEE Trans. Cybern. 43 (5) (2013)
Dezhi Li, Wilson Wang, Fathy Ismail
Enhanced fuzzy-filtered neural networks for material fatigue prognosis. Appl. Soft Comput. 13 (1) (2013)
Dezhi Li, Wilson Wang, Fathy Ismail
An enhanced GA technique for system optimization. IECON (2012)
Jie Liu, Shahab Ghafari, Wilson Wang, M. Farid Golnaraghi, Fathy Ismail
Bearing Fault Diagnostics Based on Reconstructed Features. IAS (2008)
David Roth, Paul J. Gray, Fathy Ismail, Sanjeev Bedi
Mechanistic modelling of 5-axis milling using an adaptive and local depth buffer. Comput. Aided Des. 39 (4) (2007)
Armando Roman, Sanjeev Bedi, Fathy Ismail
Tool path planning for 3-axis machining. Int. J. Manuf. Res. 1 (2) (2006)
Paul J. Gray, Sanjeev Bedi, Fathy Ismail
Arc-intersect method for 5-axis tool positioning. Comput. Aided Des. 37 (7) (2005)
Paul J. Gray, Fathy Ismail, Sanjeev Bedi
Graphics-assisted Rolling Ball Method for 5-axis surface machining. Comput. Aided Des. 36 (7) (2004)
Wilson Wang, Fathy Ismail, M. Farid Golnaraghi
A neuro-fuzzy approach to gear system monitoring. IEEE Trans. Fuzzy Syst. 12 (5) (2004)
David Roth, Fathy Ismail, Sanjeev Bedi
Mechanistic modelling of the milling process using an adaptive depth buffer. Comput. Aided Des. 35 (14) (2003)
Paul J. Gray, Sanjeev Bedi, Fathy Ismail
Rolling ball method for 5-axis surface machining. Comput. Aided Des. 35 (4) (2003)
Paul J. Gray, Fathy Ismail, Sanjeev Bedi
Cusp modeling for 5-axis surface machining. Symposium on Solid Modeling and Applications (2003)
David Roth, Sanjeev Bedi, Fathy Ismail, Stephen Mann
Surface swept by a toroidal cutter during 5-axis machining. Comput. Aided Des. 33 (1) (2001)
Andrew Warkentin, Fathy Ismail, Sanjeev Bedi
Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces. Comput. Aided Geom. Des. 17 (1) (2000)
David Roth, Sanjeev Bedi, Fathy Ismail
Generation of swept volumes of toroidal endmills in five-axis motion using space curves. Symposium on Solid Modeling and Applications (1999)
Andrew Warkentin, Fathy Ismail, Sanjeev Bedi
Intersection approach to multi-point machining of sculptured surfaces. Comput. Aided Geom. Des. 15 (6) (1998)