Jean-Yves Dantan

Publication Activity (10 Years)

Years Active: 2005-2024
Publications (10 Years): 16

Top Topics

Production System

Reliability Analysis

Top Venues

Int. J. Prod. Res.

J. Comput. Inf. Sci. Eng.

Comput. Ind. Eng.

Comput. Aided Des.

Publications

Abdoul Rahime Diallo, Lazhar Homri, Jean-Yves Dantan, Frédéric Bonnet, Thomas Boeuf
Faults Diagnosis based on Autoencoder and Classifier Techniques. ICCAD (2024)
Vincent Ciancio, Lazhar Homri, Jean-Yves Dantan, Ali Siadat
Development of a flexible data management system, to implement predictive maintenance in the Industry 4.0 context. Int. J. Prod. Res. 62 (6) (2024)
Tian Zhang, Lazhar Homri, Jean-Yves Dantan, Ali Siadat
Models for reliability assessment of reconfigurable manufacturing system regarding configuration orders. Reliab. Eng. Syst. Saf. 231 (2023)
Amirhossein Khezri, Lazhar Homri, Alain Etienne, Jean-Yves Dantan
Hybrid Cost-Tolerance Allocation and Production Strategy Selection for Complex Mechanisms: Simulation and Surrogate Built-In Optimization Models. J. Comput. Inf. Sci. Eng. 23 (5) (2023)
Paul Stief, Alain Etienne, Jean-Yves Dantan, Ali Siadat
A methodology for production system design driven by product modelling and analysis - application in the automotive industry. Int. J. Prod. Res. 61 (4) (2023)
Wahb Zouhri, Lazhar Homri, Jean-Yves Dantan
Handling the impact of feature uncertainties on SVM: A robust approach based on Sobol sensitivity analysis. Expert Syst. Appl. 189 (2022)
Tian Zhang, Lazhar Homri, Jean-Yves Dantan, Ali Siadat
Proposition of Applying Markov Transfer State in Reliability Analysis of Manufacturing System with Different Configuration Orders. IEEM (2022)
Tian Zhang, Lazhar Homri, Jean-Yves Dantan, Ali Siadat
Conceptual Maps of Reliability Analysis Applied in Reconfigurable Manufacturing System. APMS (5) (2021)
I. El Mouayni, Alain Etienne, A. Lux, Ali Siadat, Jean-Yves Dantan
A simulation-based approach for time allowances assessment during production system design with consideration of worker's fatigue, learning and reliability. Comput. Ind. Eng. 139 (2020)
Edoh Goka, Lazhar Homri, Pierre Beaurepaire, Jean-Yves Dantan
Statistical Tolerance Analysis of Over-Constrained Mechanical Assemblies With Form Defects Considering Contact Types. J. Comput. Inf. Sci. Eng. 19 (2) (2019)
Jelena Petronijevic, Alain Etienne, Jean-Yves Dantan
Human factors under uncertainty: A manufacturing systems design using simulation-optimisation approach. Comput. Ind. Eng. 127 (2019)
Mohammad Rezaei-Malek, Mehrdad Mohammadi, Jean-Yves Dantan, Ali Siadat, Reza Tavakkoli-Moghaddam
A review on optimisation of part quality inspection planning in a multi-stage manufacturing system. Int. J. Prod. Res. 57 (15-16) (2019)
Mohammad Rezaei-Malek, Ali Siadat, Jean-Yves Dantan, Reza Tavakkoli-Moghaddam
A trade-off between productivity and cost for the integrated part quality inspection and preventive maintenance planning under uncertainty. Int. J. Prod. Res. 57 (19) (2019)
Mehrdad Mohammadi, Jean-Yves Dantan, Ali Siadat, Reza Tavakkoli-Moghaddam
A bi-objective robust inspection planning model in a multi-stage serial production system. Int. J. Prod. Res. 56 (4) (2018)
Qing Xia, Alain Etienne, Jean-Yves Dantan, Ali Siadat
Reconfigurable machining process planning for part variety in new manufacturing paradigms: Definitions, models and framework. Comput. Ind. Eng. 115 (2018)
Lazhar Homri, Edoh Goka, Guillaume Levasseur, Jean-Yves Dantan
Tolerance analysis - Form defects modeling and simulation by modal decomposition and optimization. Comput. Aided Des. 91 (2017)
A. Dumas, Jean-Yves Dantan, Nicolas Gayton
Impact of a behavior model linearization strategy on the tolerance analysis of over-constrained mechanisms. Comput. Aided Des. 62 (2015)
Alex Ballu, Luc Mathieu, Jean-Yves Dantan
Formal Language for GeoSpelling. J. Comput. Inf. Sci. Eng. 15 (2) (2015)
Jean-Yves Dantan
Comparison of Skin Model Representations and Tooth Contact Analysis Techniques for Gear Tolerance Analysis. J. Comput. Inf. Sci. Eng. 15 (2) (2015)
Elnaz Asadollahi-Yazdi, Alaa Hassan, Ali Siadat, Jean-Yves Dantan, Ali Azadeh, Abbas Keramati
Multi-objective optimization for inspection planning using NSGA-II. IEEM (2015)
S. Meysam Mousavi, S. Mirdamadi, Ali Siadat, Jean-Yves Dantan, Reza Tavakkoli-Moghaddam
An intuitionistic fuzzy grey model for selection problems with an application to the inspection planning in manufacturing firms. Eng. Appl. Artif. Intell. 39 (2015)
Paul Beaucaire, Nicolas Gayton, Emmanuel Duc, Jean-Yves Dantan
Statistical tolerance analysis of over-constrained mechanisms with gaps using system reliability methods. Comput. Aided Des. 45 (12) (2013)
Ahmed-Jawad Qureshi, Jean-Yves Dantan, Vahid Sabri, Paul Beaucaire, Nicolas Gayton
A statistical tolerance analysis approach for over-constrained mechanism based on optimization and Monte Carlo simulation. Comput. Aided Des. 44 (2) (2012)
Paul Beaucaire, Nicolas Gayton, Emmanuel Duc, Maurice Lemaire, Jean-Yves Dantan
Statistical tolerance analysis of a hyperstatic mechanism, using system reliability methods. Comput. Ind. Eng. 63 (4) (2012)
Patrick Martin, Jean-Yves Dantan, Alain D'Acunto
Virtual manufacturing: prediction of work piece geometric quality by considering machine and set-up accuracy. Int. J. Comput. Integr. Manuf. 24 (7) (2011)
Ahmed-Jawad Qureshi, Jean-Yves Dantan, Jérôme Bruyere, Régis Bigot
Set based robust design of mechanical systems using the quantifier constraint satisfaction algorithm. Eng. Appl. Artif. Intell. 23 (7) (2010)
Fangcai Wu, Jean-Yves Dantan, Alain Etienne, Ali Siadat, Patrick Martin
Improved algorithm for tolerance allocation based on Monte Carlo simulation and discrete optimization. Comput. Ind. Eng. 56 (4) (2009)
Jean-Yves Dantan, Ahmed-Jawad Qureshi
Worst-case and statistical tolerance analysis based on quantified constraint satisfaction problems and Monte Carlo simulation. Comput. Aided Des. 41 (1) (2009)
Jean-Yves Dantan, Alex Ballu, Luc Mathieu
Geometrical product specifications - model for product life cycle. Comput. Aided Des. 40 (4) (2008)
Aamer Baqai, Ali Siadat, Jean-Yves Dantan, Patrick Martin
Integration of a manufacturing ontology with the design of reconfigurable machine tool using function-behavior-structure approach. ICDIM (2007)
Alain Etienne, Jean-Yves Dantan, Ali Siadat, Patrick Martin
An improved approach for automatic process plan generation of complex borings. Comput. Ind. 57 (7) (2006)
Jean-Yves Dantan, Luc Mathieu, Alex Ballu, Patrick Martin
Tolerance synthesis: quantifier notion and virtual boundary. Comput. Aided Des. 37 (2) (2005)