Eric Semail

Publication Activity (10 Years)

Years Active: 2003-2024
Publications (10 Years): 16

Top Topics

Model Predictive Control

Fault Diagnosis

Permanent Magnet Synchronous

Top Venues

Math. Comput. Simul.

IEEE Trans. Ind. Electron.

Publications

Anthony El Hajj, Eric Semail, Abdelmounaïm Tounzi, Darius Vizireanu, Jalal Cheaytani
Detection of incipient faults in nine-phase machines: Impact of the star winding configuration. Math. Comput. Simul. 224 (2024)
Wenjing Zhang, Ngac Ky Nguyen, Eric Semail, Yanliang Xu
A New Harmonic Current Control Approach of Dual Three-Phase PMSM in Degraded Mode. IECON (2023)
Duc Tan Vu, Ngac Ky Nguyen, Eric Semail
Eliminations of Low-frequency Current Harmonics for Five-phase Open-end Winding Non-sinusoidal Machine Drives applying Neural Networks. IECON (2020)
Diana Angelica Torres Guzman, Ngac Ky Nguyen, Mohammed Trablesi, Eric Semail
Low Speed Sensorless Control of Non-Salient Poles Multiphase PMSM. ICIT (2019)
Tiago José dos Santos Moraes, Eric Semail, Ngac Ky Nguyen
Demagnetization analysis of an open-end windings 5-phase PMSM under transistor short-circuit fault. IECON (2019)
Safouene Ouenzerfi, Hussein Zahr, Mohamed Trabelsi, Eric Semail, Souad Harmand, Riadh Boubaker
3-D Multi-Nodal Thermal Modelling for Fault-Tolerant Machine. ICIT (2019)
Abdelhak Mekahlia, Eric Semail, Franck Scuiller, Hussein Zahr
Impact of Winding Parameters on Torque Level under Harmonic Injection in Multiphase Induction Machine. IECON (2019)
Mario Bermudez, Oleg Gomozov, Xavier Kestelyn, Federico Barrero, Ngac Ky Nguyen, Eric Semail
Model predictive optimal control considering current and voltage limitations: Real-time validation using OPAL-RT technologies and five-phase permanent magnet synchronous machines. Math. Comput. Simul. 158 (2019)
Duc Tan Vu, Ngac Ky Nguyen, Eric Semail
An Overview of Methods using Reduced-Ordered Transformation Matrices for Fault-Tolerant Control of 5-phase Machines with an Open Phase. ICIT (2019)
Hussein Zahr, Mohamed Trabelsi, Eric Semail, Ngac Ky Nguyen
Five-phase Bi-harmonic PMSM control under voltage and currents limits. IECON (2017)
Ngac Ky Nguyen, Eric Semail, Frederic De Belie, Xavier Kestelyn
Adaline Neural Networks-based sensorless control of five-phase PMSM drives. IECON (2016)
Ngac Ky Nguyen, Fabien Meinguet, Eric Semail, Xavier Kestelyn
Fault-Tolerant Operation of an Open-End Winding Five-Phase PMSM Drive With Short-Circuit Inverter Fault. IEEE Trans. Ind. Electron. 63 (1) (2016)
Mohamed Trabelsi, Ngac Ky Nguyen, Eric Semail
Real-Time Switches Fault Diagnosis Based on Typical Operating Characteristics of Five-Phase Permanent-Magnetic Synchronous Machines. IEEE Trans. Ind. Electron. 63 (8) (2016)
Mohamed Trabelsi, Eric Semail, Ngac Ky Nguyen, Fabien Meinguet
Open-switch and open-phase real time FDI process for multiphase PM Synchronous Motors. ISIE (2016)
Tiago José dos Santos Moraes, Ngac Ky Nguyen, Fabien Meinguet, Eric Semail
A comparative study of two fault-tolerant dual-motor drive topologies under short-circuit inverter switch fault. ISIE (2015)
Xavier Kestelyn, Oleg Gomozov, Jérôme Buire, Frédéric Colas, Ngac Ky Nguyen, Eric Semail
Investigation on model predictive control of a five-phase permanent magnet synchronous machine under voltage and current limits. ICIT (2015)
Ngac Ky Nguyen, Damien Flieller, Xavier Kestelyn, Tiago José dos Santos Moraes, Eric Semail
Analytical optimal currents for multiphase PMSMs under fault conditions and saturation. IECON (2014)
Fabien Meinguet, Ngac Ky Nguyen, Paul Sandulescu, Xavier Kestelyn, Eric Semail
Fault-tolerant operation of an open-end winding five-phase PMSM drive with inverter faults. IECON (2013)
Fabien Meinguet, Paul Sandulescu, Xavier Kestelyn, Eric Semail
A Method for Fault Detection and Isolation Based on the Processing of Multiple Diagnostic Indices: Application to Inverter Faults in AC Drives. IEEE Trans. Veh. Technol. 62 (3) (2013)
Li Lu, Bassel Aslan, Luc Kobylanski, Paul Sandulescu, Fabien Meinguet, Xavier Kestelyn, Eric Semail
Computation of optimal current references for flux-weakening of multi-phase synchronous machines. IECON (2012)
Xavier Kestelyn, Eric Semail
A Vectorial Approach for Generation of Optimal Current References for Multiphase Permanent-Magnet Synchronous Machines in Real Time. IEEE Trans. Ind. Electron. 58 (11) (2011)
Fabrice Locment, Eric Semail, Xavier Kestelyn
Vectorial Approach-Based Control of a Seven-Phase Axial Flux Machine Designed for Fault Operation. IEEE Trans. Ind. Electron. 55 (10) (2008)
Alain Bouscayrol, Bernard Davat, Bernard de Fornel, Bruno François, Jean-Paul Hautier, Farid Meibody-Tabar, Eric Monmasson, Maria Pietrzak-David, Hubert Razik, Eric Semail
Control structures for multi-machine multi-converter systems with upstream coupling. Math. Comput. Simul. 63 (3-5) (2003)