Rukmi Dutta

Publication Activity (10 Years)

Years Active: 2013-2024
Publications (10 Years): 12

Top Topics

Parameter Estimation

Induction Motor

Permanent Magnet Synchronous

Top Venues

IEEE Trans. Ind. Electron.

IEEE Trans. Instrum. Meas.

Int. J. Circuit Theory Appl.

Publications

Minh Xuan Bui, Rukmi Dutta, Muhammed Fazlur Rahman
Application of Deep Learning in Parameter Estimation of Permanent Magnet Synchronous Machines. IEEE Access 12 (2024)
Pratikanta Mishra, Atanu Banerjee, Mousam Ghosh, Sushanta Gogoi, Rukmi Dutta
Development of a cost-effective circuit hardware architecture for brushless direct current motor driver. Int. J. Circuit Theory Appl. 49 (7) (2021)
Sayed Mohammad Showybul Islam Shakib, Dan Xiao, Rukmi Dutta, Muhammed Fazlur Rahman
Deadbeat Predictive Direct Torque and Active Flux Control with Disturbance Observer. IECON (2021)
Alireza Pouramin, Rukmi Dutta, Mohammad Farshadnia, Muhammed Fazlur Rahman
A Standstill Method to Measure Electromagnetically Induced Torque Ripple of Permanent Magnet Synchronous Machines. IEEE Trans. Instrum. Meas. 69 (10) (2020)
Mohammad Farshadnia, Muhammad Ali Masood Cheema, Alireza Pouramin, Rukmi Dutta, John Edward Fletcher
Design of Optimal Winding Configurations for Symmetrical Multiphase Concentrated-Wound Surface-Mount PMSMs to Achieve Maximum Torque Density Under Current Harmonic Injection. IEEE Trans. Ind. Electron. 65 (2) (2018)
Alireza Pouramin, Rukmi Dutta, M. F. Rahman
Challenges of considering saliency ratio in design optimization of IPM machines. IECON (2017)
Matthew Priestley, Dan Xiao, Nurul Ain Mohd Said, Rukmi Dutta, John E. Fletcher
Post-fault control strategy for IPMSMs with non-sinusoidal back-EMFs in an open-ended winding configuration. IECON (2016)
Merlin Chai, Dan Xiao, Rukmi Dutta, John E. Fletcher
Space Vector PWM Techniques for Three-to-Five-Phase Indirect Matrix Converter in the Overmodulation Region. IEEE Trans. Ind. Electron. 63 (1) (2016)
Nurul Ain Mohd Said, Matthew Priestley, Rukmi Dutta, John E. Fletcher
Torque ripple minimization in dual inverter open-end winding PMSM drives with non-sinusoidal back-EMFs by harmonic current suppression. IECON (2016)
Dai Nguyen, Rukmi Dutta, Muhammed Fazlur Rahman, John E. Fletcher
Performance of a Sensorless Controlled Concentrated-Wound Interior Permanent-Magnet Synchronous Machine at Low and Zero Speed. IEEE Trans. Ind. Electron. 63 (4) (2016)
Sithumini Ekanayake, Rukmi Dutta, M. F. Rahman, R. M. Hansika Madhavi Rathnayake
A modified single-current-regulator control scheme for deep flux-weakening operation of interior permanent magnet synchronous motors. IECON (2016)
R. M. Hansika Madhavi Rathnayake, Rukmi Dutta, John E. Fletcher, Dan Xiao, Sithumini Ekanayake
Power and voltage control of a nonpitchable direct driven fractional slot concentrated wound-IPMSG based wind turbine operating above base speed. IECON (2016)
Nurul Ain Mohd Said, Dan Xiao, Rukmi Dutta, John E. Fletcher
Closed-loop control strategy for PM machines with non-sinusoidal back-EMFs using dual-inverter open-end winding. IECON (2015)
Mohammad Farshadnia, Muhammad Ali Masood Cheema, Rukmi Dutta, John E. Fletcher, M. F. Rahman
Anomalies in experimental measurement of operational inductances of a concentrated-wound IPM machine under field-weakening region. IECON (2015)
Sithumini Ekanayake, Rukmi Dutta, M. F. Rahman, Dan Xiao
Deep flux weakening control of a segmented interior permanent magnet synchronous motor with maximum torque per voltage control. IECON (2015)
R. M. Hansika Madhavi Rathnayake, Rukmi Dutta, John E. Fletcher, Dan Xiao
Modified efficiency optimization control for fractional slot concentrated wound interior permanent magnet synchronous generators. IECON (2015)
Merlin Chai, Dan Xiao, Rukmi Dutta, John E. Fletcher
Overmodulation techniques for the three-to-five phase indirect matrix converter with space vector PWM. IECON (2014)
Merlin Chai, Rukmi Dutta, John E. Fletcher
Space vector PWM for three-to-five phase indirect matrix converters with d2-q2 vector elimination. IECON (2013)
Kazi Ahsanullah, Rukmi Dutta, M. F. Rahman
Distributed and concentrated winding Interior PM Synchronous Machine (IPMSM) for direct drive wind turbine. IECON (2013)